应用
（钻, 铣, 磨, 雕刻）机床 | Applications | Drilling, Milling, Grinding, Engraving | |
外壳夹装尺寸 | 45 mm | Clamping diameter | 45 mm |
马达类型 | 无刷同步高速电机 | Motor system | Brushless DC motor (BLDC) |
转速范围 | 5,000 – 50,000 / 60,000* min-1 | Speed range | 5,000 - 50,000 / 60,000* rpm |
额定电压 | 45 V | Voltage | 45 V |
电流 | 最大 16 A | Current | max. 16 A |
扭矩t | 最大 17 Ncm | Torque | max. 17 Ncm |
频率 | 83 - 833 / 1,000* Hz | Frequency | 83 - 833 / 1,000* Hz |
功率 | 最大 1,050 W | Output power | max. 1,050 W |
重量 | 1,7 kg | Weight | 1.7 kg |
轴承 | 3 x 陶瓷轴承, 油脂润滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
保护等级 | IP 54 | Protection category | IP 54 |
电机保护 | PTC - 100 °C | Motor protection | PTC - 100°C |
安装位置 |
| Working position |
|
负载方向 | 轴向 + 径向 | Load direction | axial + radial |
锥面跳动 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
刀具夹持范围 | Ø 1.0 – 6.35 mm (incl. 1/8 + 1/4") | Chuck clamping range | Ø 1.0 - 6.35 mm (incl. 1/8 + 1/4") |
换刀方式 | 2 开口扳手 (SW 13 + 10) | Tool change | 2 open-end wrenches (13 + 10 mm) |
冷却系统 | 外夹具冷却 | Cooling system | Cooling via clamping bracket |
防水防尘措施 | 压缩气 0.5 – 0.8 bar (外管径 Ø4 mm) | Protected against dirt | Sealing air 0.5 - 0.8 bar |
外壳材料 | 不锈钢 | Housing material | Stainless steel |
推荐变频器 | e@syDrive® 4426, TV 4506** | Inverter recommendation | e@syDrive® 4426, TV 4506** |
*短时间运行 **输出功率有所降低 | 保留修改权 | *short term **reduced output power | Subject to change without notice |
