凯斯®防静电剂GL
外 观:
无色至浅黄色透明液体
离 子 性:
非离子
相 容 性:
和各种离子型助剂及有机溶剂有良好的相容性。
P H 值:
6.0~7.0
用 途:
可有效去除毛被和皮板的静电,使毛被松散、灵活,减少吸尘和沾污。不
影响毛被的颜色和手感,效果长久。可应用在染色的最后阶段大约
5~20min,或在烫毛整理阶段,转锯末中以及喷涂、回潮时使用。
用 量:
转锯末使用时,每袋锯末加80~100ml;染色时使用0.5~1克/升;喷涂时
使用10克/升。
特 点:
1.在较低的相对湿度(25%)下,仍有良好的抗静电性能;
2.在万次摩擦后,仍具有极佳的抗静电性能;
3.已通过毒理试验;
4.能应用于水油溶剂混合的三防助剂中;
5.对产品的手感不产生影响.
包 装:
塑桶60千克/桶
保 存:
在5~35℃条件下保质期12个月。
储运条件:
使用之后要盖紧盖子。储存于阴凉通风处。防冻、防暴晒。属非危险化学
品,本产品仅限于工业用途。
.
温馨提示
本公司提供的各种资料是根据本公司现有知识及使用经验编写的,供广大用户在使用时参考。由于加工过程中存在许多影响因素,当使用本公司产品时,用户有责任预先进行试验。本公司仅保证出厂产品其品质稳定不变。使用本公司产品时,应遵守本公司安全资料中的建议和注意事项,处置化学品时,应小心采取相应的安全防护措施。本文件版权由北京恒普科技有限责任公司所有,如需转载,请注明版权。
KAISI ANTISTATIC AGENT GL
DESCRIPTION: Appearance:Colorless to light yellow transparent liquid
Charge:Nonionic
Compatibility:And all kinds of ionic additives and organic
solvents have good compatibility.
PH:6.0~7.0
APPLICATION: Can effectively remove electrostatic hairs and skin, hair was loose and flexible, reduce dust and contamination. Does not affect the hair color and handle, the effect of long. Can be used in the final stages of dyeing or finishing stage at about 5~20min, scalding, turn and use sawdust spray, when moisture regain.
DOSAGE: Turn sawdust, sawdust for each bag with 80~100 ml; Dyeing
using 0.5~1 g/l; Spraying with 10 g/l.
CHARACTERISTICS:
1.At low relative humidity (25%), there is still a good antistatic property.
2.After ten thousand times of friction, it still has excellent antistatic performance.
3.Passed the toxicological test.
4.Can be applied to the three additive mixing water in oil solvent.
5.No impact on the product feel.
PACKING: 60 Kg per plastic drum
STORAGE: At 5~35℃ and shelf-life of 12 months. After use, close the lid to avoid moisture and store in cool and ventilated areas. Antifreeze and anti-exposure. This product is for industrial purposes only.
Warm prompt
Our company provides all kinds of information is written according to the company's existing knowledge and experience with, for the vast number of users in the use of reference. Because there are many influence factors in the process of machining, when using the company's products, the user has the responsibility to test in advance. The company only to ensure the quality of its products are stable. When using the company's products shall comply with the advice and matters needing attention in the company safety data, disposal of chemicals, take corresponding safety protection measures should be careful. This file copyright owned by Beijing hengpu technology co., LTD., if you want to reprint, please indicate the copyright.

