| 应用 | 钻, 铣, 磨, 雕刻机床主轴 | Applications | Drilling, Milling, Grinding, Engraving |
外壳夹装尺寸 | 60 mm | Clamping diameter | 60 mm |
马达类型 | 无刷同步高速电机 | Motor system | Brushless DC motor (BLDC) |
转速范围 | 2,500 – 60,000 min-1 | Speed range | 2,500 - 60,000 rpm |
额定电压 | 230 V | Voltage | 230 V |
电流 | 最大 12 A | Current | max. 12 A |
扭矩t | 最大 65 Ncm | Torque | max. 65 Ncm |
频率 | 33 – 1,000 Hz | Frequency | 33 - 1,000 Hz |
功率 | 最大 3,000 W | Output power | max. 3,000 W |
重量 | 3.3 kg | Weight | 3.3 kg |
轴承 | 3 x 陶瓷轴承, 油脂润滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
保护等级 | IP 54 | Protection category | IP 54 |
电机保护 | PTC - 100 °C | Motor protection | PTC - 100°C |
安装位置 |
| Working position |
|
负载方向 | 轴向 + 径向 | Load direction | axial + radial |
锥面跳动 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
刀具夹持范围 | Ø 1.0 – 6.35 mm (包括 1/8 + 1/4") | Chuck clamping range | Ø 1.0 - 6.35 mm (incl. 1/8 + 1/4") |
换刀方式 | 2 开口扳手 (SW 13 + 10) | Tool change | 2 open-end wrenches (13 + 10 mm) |
冷却系统 | 外夹具冷却 | Cooling system | Cooling via clamping bracket |
防水防尘措施 | 密封气 0.5 – 0.8 bar (管径 Ø内/外 4/6 mm) | Protected against dirt | Seeling air 0.5 - 0.8 bar (hose Ø inner/outer 4/6 mm) |
外壳材料 | 不锈钢 | Housing material | Stainless steel |
推荐变频器 | e@syDrive® 4438, TV 4538 | Inverter recommendation | e@syDrive® 4438, TV 4538 |
| 保留修改权 |
| Subject to change without notice |
