福斯FOSC®系列毛皮染料
说 明：
福斯FOSC®系列毛皮染料是由北京恒普科技有限责任公司与全球科
研机构India Chemical Technology Laboratory及Federal Institute of Chemical
Technology合作开发的全新结构染料，该系列染料是完全符合生态纺织品
的要求的环保染料。
用 途：
福斯FOSC®系列毛皮染料适合染制大部分类型毛皮。
特 点：
福斯FOSC®系列毛皮染料色谱齐全，色泽鲜艳、自然、饱满，上染较快，
吸净率高，皮板着色极浅。染色温度低，在60~65℃之间即可得到良好的
染色效果。
福斯FOSC®系列毛皮染料具有良好的匀染性、结合力和优越各种坚牢度。
福斯FOSC®系列毛皮染料在酸性条件下染色，建议甲酸用量1.0~2.0ml/L。
福斯FOSC®系列毛皮染料是环保型染料，均不含有25种禁用致癌芳香胺。
产 品：
福斯FOSC®系列毛皮染料共计5个品种，分别如下所示：
福斯FOSC® RED HR 福斯红HR
福斯FOSC® BLUE HB 福斯蓝HB
福斯FOSC® YELLOW HY 福斯黄HY
福斯FOSC® BROWN HW 福斯棕HW
福斯FOSC® BLACK HK 福斯黑HK
包 装：
25 千克/桶
储 存：
在5~35℃条件下保质期2年。
使用方法：
详见染色工艺或咨询售后服务工程师。
应用性能：
见附表1
温馨提示
本公司提供的各种资料是根据本公司现有知识及使用经验编写的，供广大用户在使用时参考。由于加工过程中存在许多影响因素，当使用本公司产品时，用户有责任预先进行试验。本公司仅保证出厂产品其品质稳定不变。使用本公司产品时，应遵守本公司安全资料中的建议和注意事项，处置化学品时，应小心采取相应的安全防护措施。本文件版权由北京恒普科技有限责任公司所有，如需转载，请注明版权。
附表一：
福斯FOSC®系列毛皮染料性能指标
名 称 | 耐摩擦 | 耐日晒 | 耐水洗 | 耐汗渍 | 耐熨烫 | ||||||||
干 | 湿 | 1/1 | 2/1 | 脱色 | 沾色 | 脱色 | 沾色 | 1/1 | 2/1 | ||||
FOSC® RED HR | 4 | 3-4 | 4 | 4-5 | 4-5 | 4 | 4 | 3-4 | 4 | 4-5 | |||
FOSC® BLUE HB | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4-5 | 4-5 | |||
FOSC® YELLOW HY | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 4
| 4-5 | |||
FOSC® BROWN HW | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 | 4-5 | |||
FOSC® BLACK HK | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 | 4-5 | |||
温馨提示
本公司提供的各种资料是根据本公司现有知识及使用经验编写的，供广大用户在使用时参考。由于加工过程中存在许多影响因素，当使用本公司产品时，用户有责任预先进行试验。本公司仅保证出厂产品其品质稳定不变。使用本公司产品时，应遵守本公司安全资料中的建议和注意事项，处置化学品时，应小心采取相应的安全防护措施。本文件版权由北京恒普科技有限责任公司所有，如需转载，请注明版权。
FOSC® SERIES OF FUR DYES
DESCRIPTION： The FOSC® series of fur dyes by the Beijing hengPu technology
limited liability company with world-renowned research
institutions India Chemical Technology Laboratory and Federal
Institute of Chemical Technology to develop new structure of
dyes, the dyes is environmentally friendly dyes in full compliance
with the requirements of the ecological textile.
APPLICATION： FOSC® series of fur dyes suitable for dyeing most types of fur.
CHARACTERISTICS：FOSC® series of fur dyes chromatography complete, bright
color natural, full, fast dyeing, high absorption rate, leather plate
coloring very shallow. The dyeing temperature is low, and good
dyeing effect can be obtained between 60~65℃.FOSC® series of
fur dyes have good levelness and binding force, also has the
superior various fastness.FOSC® series of fur dyes are dyed
under acidic conditions, the recommended formic acid dosage
1.0~2.0 ml/L.FOSC® series of fur dyes are environmentally
friendly dyes, do not contain 25 kinds of banned carcinogenic
aromatic amines.
PRODUCT: FOSC® series of fur dyes for a total of five varieties, respectively
as shown below ：
FOSC® RED HR
FOSC® BLUE HB
FOSC® YELLOW HY
FOSC® BROWN HW
FOSC® BLACK HK
PACKING： 25 kg/carton
STORAGE： In 5~35 ℃ under the condition of 2 years.
USAGE METHOD: Reference dyeing process or consulting service engineer.
APPLICATION PERFORMANCE: Reference Schedule 1.
Warm prompt
Our company provides all kinds of information is written according to the company's existing knowledge and experience with, for the vast number of users in the use of reference. Because there are many influence factors in the process of machining, when using the company's products, the user has the responsibility to test in advance. The company only to ensure the quality of its products are stable. When using the company's products shall comply with the advice and matters needing attention in the company safety data, disposal of chemicals, take corresponding safety protection measures should be careful. This file copyright owned by Beijing hengpu technology co., LTD., if you want to reprint, please indicate the copyright.
Schedule 1:
FOSC® Series Fur Dyes Performance Indicators
Name | Rubbing | Lighting | washing | sweating | ironing | |||||
Dry | Wet | 1/1 | 2/1 | 脱色 | 沾色 | 脱色 | 沾色 | 1/1 | 2/1 | |
FOSC® RED HR | 4 | 3-4 | 4 | 4-5 | 4-5 | 4 | 4 | 3-4 | 4 | 4-5 |
FOSC® BLUE HB | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4-5 | 4-5 |
FOSC® YELLOW HY | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 4
| 4-5 |
FOSC® BROWN HW | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 | 4-5 |
FOSC® BLACK HK | 4-5 | 4 | 4 | 4-5 | 4-5 | 4 | 4-5 | 4 | 4 | 4-5 |
Warm prompt
Our company provides all kinds of information is written according to the company's existing knowledge and experience with, for the vast number of users in the use of reference. Because there are many influence factors in the process of machining, when using the company's products, the user has the responsibility to test in advance. The company only to ensure the quality of its products are stable. When using the company's products shall comply with the advice and matters needing attention in the company safety data, disposal of chemicals, take corresponding safety protection measures should be careful. This file copyright owned by Beijing hengpu technology co., LTD., if you want to reprint, please indicate the copyright.
