适用于焊接19% Cr, 13% Ni, 3% Mo牌号奥氏体不锈钢的实芯抗腐蚀铬镍钼合金焊丝。 OK Autrod 317L由于钼含量较高，具有良好的普通抗腐蚀性和抗点蚀性。该合金较低的碳含量让其特别适用于存在晶间腐蚀可能性的应用。该合金适用于石化、纸浆和造纸工业等存在严重腐蚀性条件的应用。
Typical Tensile Properties| As welded |
| Elongation | Tensile Strength | Yield Strength |
| 45 % | 600 MPa | 390 MPa |
夏比V型缺口冲击性能| As welded |
| Impact Value | Testing Temperature |
| 135 J | 20 °C |
| 55 J | -196 °C |
焊缝金属分析| Mn |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| 1.4 % | - | - | - | - | - | - | - | - |
| Mo |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | 3.6 % | - | - | - | - | - | - | - |
| Cu |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | 0.05 % | - | - | - | - | - | - |
| C |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | - | 0.01 % | - | - | - | - | - |
| Si |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | - | - | 0.4 % | - | - | - | - |
| FN WRC-92 |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | - | - | - | 7 % | - | - | - |
| Ni |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | - | - | - | - | 13.6 % | - | - |
| Cr |
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| - | - | - | - | - | - | - | - | 18.9 % |
熔敷数据| 安培 | 熔敷率 | 电压 V | 直径 | 送丝速度 |
| 50-140 A | 0,8-2,7 kg/h | 16-22 V | 0.8 mm | 3,4-11 m/min |
| 80-190 A | 0,9-2,7 kg/h | 16-24 V | 1.0 mm | 2,6-7,1 m/min |
| 180-280 A | 2,6-4,5 kg/h | 20-28 V | 1.2 mm | 4,9-8,5 m/min |
| 230-350 A | 3-5,2 kg/h | 24-28 V | 1.6 mm | 3,2-5,5 m/min |
