河北骏豪机械设备有限责任公司
联系人:张经理13933000298
载货上升下降是靠电力驱动提升,电瓶功效率一般为12伏和24伏组合,具体看吨位大小而决定。多功能手柄:操作者可通过电子锁启动车辆。轻松对升降速度加以控制,如需加速升降只需控制手柄上的开关,来达到所需升高,下降的效果。半电动堆高车主要的作用就是起到升降的功能,行走、转向都是人力操作。主要用于装车卸货、仓库堆货架、高空取料等只需要小范围移动的操作。操作简单、价格便宜、实用范围较广、保养维护方便、对通道宽度要求比较低。但移动费力、安全系数较低、电瓶使用时间较短、不适合载重超过1.5吨以上的货物、承重量随着升高的高度变化比较大,大多数的半电堆高车在升高到最高时都不能载重到它额定的重量。会随着升高度而减牙承载力。
Cargo rise and fall is driven by electric power upgrade, battery efficiency is generally 12 volts and 24 volt combination, depending on the size of the tonnage and decided. Multi function handle: operator can start vehicle by electronic lock. It is easy to control the speed of lifting. If you want to speed up and down, you only need to control the switch on the handle so as to achieve the desired effect of raising and lowering. The main function of semi electric stack truck is to play the functions of lifting and moving. Mainly used for loading, unloading, warehouse, racking, shelf, high-altitude materials, only a small range of mobile operations. Simple operation, low price, wide application range, convenient maintenance and low requirement for channel width. But the mobile labor, the safety coefficient is low, the battery time is short, not suitable for load of more than 1.5 tons of cargo, the bearing weight changes with the height of the relatively large, most of the semi electric stacker can load it to the rated weight at elevated to the highest. The tooth capacity will be reduced with the lifting height.
1、采用聚酯纤维排管,弹性好,孔径小,电阻低,透气性高;
2、完全绝缘的软连接线,无漏电电流;
3、弹开顶面塞的阀结构,带有特殊的电解液液面指示器;
4、配带自动补水的注液帽;
5、采用多微孔进口优质斜状隔板,孔率高,电阻低;
6、采用PP电池壳、盖材料,耐冲击;
7、拥有专利的端子密封结构完全防止极板增长和漏液。
forklift batteries
1 、 adopt polyester fiber row pipe, good elasticity, small aperture, low resistance, high permeability;
2 、 completely insulated soft connecting wire, no leakage current;
Valve structure 3, open top surface elastic plug, with special electrolyte level indicator;
4 、 water injection cap with automatic feeding;
5 、 adopt multi hole imported high quality inclined clapboard, with high hole rate and low resistance;
6 、 adopt PP battery shell, cover material, shock resistance;
7 、 patent terminal sealing structure, completely prevent the growth of plate and leakage.