佛山轮转开槽机_明隆供_济南轮转开槽机安装公司
PL-K1 轮转开槽机
PL-K1 Rotary Slotter&Scorer
整机功能/GENERAL FEATYRES
主机与工作台组安装,链条推入式手动送纸;压纸、修边、开槽、切角一次完成。
开槽刀相位调整采用行星齿轮机构,电动正反360度均可微调,并附刻度盘显示所调数据。
主机采用变频调速装置,在0-70张/分速度范围内实现无级调速,方便客户使用。
齿轮材质采用优质碳素结构钢,和优质球铁经调质及齿面高频淬火处理,或正火处理具有较高的齿面硬度;并且齿轮润滑方式采用淋浴式循环润滑,改善了齿轮工作条件,减少噪音。
可正反点动机器轻松快捷调机。
The machine and the worktable are installed integrally.Paper is pushed and fed by chain manually.Pressing,trimming slotting and cutting can be finished once.
Phase of dike cutter is adjusted by the planet gear mechanism which can be fine adjusted within 360 degrees clockwise or antilockwise and is equipped with a dial to show the adjusted data.
The main machine is controlled by frequency control device.Stepless speed regulation can be achieved within the scope of0-70 sheets/minutes,which is convenient for customers.
Gears are made of high quality carbon steel and cast iron which are quenched and tempered,and gear surface is treated by high frequency quenching or normalizing,so as to ensure high hardness.Gears are lubricated by spray type cycle lubrication which improves working conditions of gears and reduce noise.
The machine can be inched clockwise or anticlockwise for quick adjustment.
主要技术参数/MAIN SPECIFICATIONS
型号/Model 1525 1530
相当高生产速度(张/分) 70 70
相当大进纸尺寸
Max.Feeding size(mm) 1430×2500 1430×3000
相当小进纸尺寸
Min.feeding size(mm) 650×350 650×350
适应纸板厚度
Suitable paperboard thickness(mm) 2-11 2-11
开槽宽度
Slotting width(mm) 7 7
切角宽度
Angle cutting width(mm) 45mm 45mm
相当大槽度
Max.slot depth(mm) 300(可加刀) 300(可加刀)
相当小开缝间隙Min.slotting size(mm) 开刀
Slotting type R 150×150×150×150 150×150×150×150
反刀
Slotting type L 270×55×270×55 270×55×270×55
总功率
Total power 4 4