赛尔奇K30研磨机
产品描述Product Description
1、该机本身包容1台吸尘器（一体不可分开使用），磨削吸尘一体化，做到无尘施工。
The machine includes a vacuum cleaner(can not use alone ).One machine can have two function:grind the floor and collect dust at the same time.
2、该机配备不同性能的特种刀具，可实现研磨、切削两种功能，可适用不同地基表面的处理，如树脂涂膜的切削去除、凹凸地面的修整和打毛、除去浮浆、除去雨淋、塑料PVC地面及沥青黏结剂的翻新等。
L380 includes special cutting tools with different functions which means it can grind and cut.It can be used in different foundation surfaces,such as grind the resin paints, Trim the uneven ground, remove the slurry, remove the rain, renew the plastic PVC floor and renew pitch adhesive.
3、刀具为金刚石材质可针对新（老）地面，水磨石，耐磨地坪进行研磨拉毛处理。正常情况下，研磨刀具处理标准混凝土地面约150-200M2/H左右，耗材成本约0.10元/M2左右。
Cutting tools are diamond material can be used for the new (old) ground, terrazzo and wear-resistant floor for grinding. Normally, the tool’s working efficiency when it is used in standard concrete floor is about 150-200㎡/h, which means just about 0.12 Yuan/㎡.
4、切削刀具为烧结金刚经特殊工艺处理而成的切削专用刀具。主要针对1MM以下旧环氧、油漆、胶水、橡胶、油污等地面进行切削处理。
Cutting tool are special tool made by special fabrication processing. it was aimed at smaller than 1 millimeter old epoxy, paint, glue, rubber, oil and other ground.
5、技术领先，低重心设计，提高了高负荷作业时的操作稳定性。同时，因机身小巧，故不受施工场地大小的限制。
K30 is lead in technology with low gravity design, improved operation stability during high load operation. Meanwhile, due to its compact size, it is not limited by the size of the construction site.
6、极低的故障率，可24小时连续施工。
The machine’s failure rate is very low. 24 hours of continuous construction
产品优点Product Advantages
1、机身小巧，扶手可以折叠，减小运输尺寸。
The size of the machine is small, the handle is collapsible. Decrease the transportation size.
2、打磨，吸尘一体化，做到无尘操作，噪音小。
Grind and collect dust can be done at the same time, the noise is low.
3、通过换刀具可以做到研磨的和切削。
Grind and cut can be realized by chaning cutting tools.
4、各部件之间有减震垫，减小机器的震动，增加操作的舒适度。
There are cushions between the parts, which can reduce the vibration of this machine and enhance operator comfort.
5、带有漏电保护，可以确保施工人员的安全防护。
With leakage protection, the safety protection of the construction personnel can be ensured.
6、刀头浮动，可以打磨，切削到比较洼的地方。
The head float, so the machine can polish the more hollow place.
7、带有转向倒顺开关.转向不对，只需拨动开关即可变换旋转方向。
With a steering reverse switch. When the machine turn to the wrong direction, the operator can change the rotation direction by just press the switch.
技术参数
型号 | Model | K30 |
尺寸（全长*全宽*全高） | Size（L*W*H） | 1200×400×896mm |
总重量 | Gross Weight | 103kg |
磨削宽度 | Working Width | 300mm |
电机 | Motor | 3.7KW×4P（5.0PS） |
电源 | Power Supply | 380V×9.5A |
| ||
一体式吸尘机规格 | Vacuum Cleaner Specification | |
输出功率 | Output Power | 1.0KW |
最大风量 | Maximum Air Volume | 3.0m³/min |
集尘箱容量 | DustCollector Capacity | 15L |
额定电压 | Rated Voltage | 220V |
额定电流 | Rated Current | 5A |
电源线长度 | Length of Wire | 20m |
实物展示
服务承诺
7天无理由退换货
A. 七天内质量问题
经客户反馈，我们这边确认产品有质量问题，会完全按客户要求进行退换货，且由我们承担产品来回运费。
B.七天内无质量问题
满足以下条件可以退换：1.没有使用或试用 2.没有损坏商品，商品包装（含附件及赠品）3.原封贴没有损坏。
**返回时请加固包装，保证货物完好返回，且需承担来回运费。如有破损拒收产品。
售后和维修
在本店购买产品后，即可享受优质的售后服务和维修。收到货后，请保管好发票，24小时服务热线 400 991 0305
