NJP-C 全自动胶囊充填机 Automatic Capsule Filling Machine

机器概述Application

此系列全自动胶囊充填机采用PLC编程，无极变频调速，人机界面操作，触摸屏显示。对运行故障或缺料能自动报警显示，自动停机，故障排除后能自动消除报警。机器还具有密码输入，参数设置，打印数据，清零等功能。 机器所有传动轴，凸轮，轴承等主要关键零件均采用进口材料，设备质量可靠，是充填胶囊药品的首选理想设备，并完全符合GMP要求。

The automatic capsule filling machine adopted PLC programmable controller, stepless frequency converter, touch screen interface with easy operating. With fault or lack of material, the machine can be automatically alarm and shut down. The machine equipped password input, parameter setting, data printing, re-setting function which make the machine working more safty. The machine main body and powder contact parts were made by stainless steel which meet GMP standard.

机器特点 Machine Features

1. 体积小，能耗低，更换模具快，操作方便，容易清洗；采用福格森传动，振动小，高速运行工作噪声低于75dB,剂量差异控制在3%内；

2. 国产机制胶囊上机率99%

3. 回转部位全封闭，具备良好润滑条件，工作台面无油污，避免了与药物的交叉污染；

4. 剂量盘周边设有拦板，非常有效地把剂量盘下平面甩出拉斯维加斯粉通过另一管路回收再利用，同时减少了工作台面的粉尘；

5. 机器采用德国西门子的人机界面，PLC可编程控制器，液晶显示每分钟产量，累计产量，动态空胶囊和药粉状态，缺胶囊报警提示及药粉不够时自动停机，故障诊断提示等。

1. Small size, low consumption of power, simplification in changing molds. Easy operating and cleaning.

2. Adopt Fugexan eliminating trough roller to transmit, less vibration, its noise is lower than 75dB while running at top speed. The powder filling dosage accuracy within ±3%, The capsule filling rate more than 99%.

3. The turning-around parts are in full closure, having excellent lubricating conditions. Without old spot on the working bench, avoiding the cross pollution with medicines.

4. Around the dose dish are fixed with shelter, which can reduce the medicine powder cast from under the dish through another pipe.

5. Adopt the touch screen interface, including PLC programming controller, crystal screen displaying the accumulative output, dynamic empty capsules and medicine powder state, alarming for lacking of capsules and insufficient medicine powder stop, trouble shooting display and soon.

技术参数Technical Parameter