XCHC-2600精密珩齿机
    珩齿机是利用珩磨轮其齿间的相对滑移速度和压力来进行珩齿的一种齿面精加工方法。由于珩齿时珩磨轮可以较大的面积与工件相接触，珩磨轮和工件之间相对速度和压强都较磨削时低，其切削表面的温度也随之降低。因此珩齿在批量生产中能获得比磨削更高的精度稳定性，表面粗糙度和无应力破坏的表面，随着高性能磨料及自动珩齿机床的发展，珩齿机的应用领域也将获得更大的扩展。

主要技术规格

齿轮外径：Φ20—Φ300mm
工件模数：0.5—5
珩磨轮直径：ф240mm
珩磨轮孔径：ф63.5mm
工作台距离：320mm
工作台行程长度：100mm
刀架回旋角度：±20°
主轴功率 ：0.75KW  减速电机 变频调速      
冲程功率：0.55KW 减速电机
外形尺寸：1400×1100×1650mm（长X宽X高）
电 源：380V 50Hz、三相四线
注：小于或大于以上尺寸可与本公司联系定制
　　　


    The honing machine is a kind of tooth surface finishing method using the relative slip velocity and pressure between the teeth of honing wheel. As the honing wheel can have a large area to contact with the workpiece, the relative speed and pressure between the honing wheel and the workpiece are lower than the grinding time, and the temperature of the cutting surface is reduced accordingly. Therefore gear honing in batch production can gain higher precision than grinding stability, surface roughness and stress free surface, with high-performance abrasive and the development of efficient automatic gear honing machine, gear honing machine application domain will also gain greater extension

Gear diameter: Φ Φ 20-300 mm
Workpiece mouds: 0.5 – 5
Honing wheel diameter: ф240mm
Honing wheel aperture : ф 63.5mm
The workbench distance: 320mm
The workbench stroke length: 100mm
Rest swing Angle: ±20°
Frequency control of motor speed by gear motor spindle power: 0.75KW
Gear motor stroke power: 0.55KW
Electricity source, 380 v, 50 hz, three phase four wire
Note: we can contact the company for customization if less than or above