额定输入电压 | 100-240V 50/60Hz |
输入电压范围 | 100V-240V |
额定输入电流 | 1.1A |
最大输入功率 | 60W |
额定输出电压 | DC14.4V | |
充 电 电 流 | 3.3A± 0.3A | |
适 用 电 池 | 12.8V（4节）2-15Ah磷酸铁锂电池 |
工 作 温 度 | -20℃~50℃ |
充 电 模 式 | 智能三段式：预充电—恒流充电—恒压充电—充满关段 |
散 热 方 式 | 无风扇自然散热，充电时请将充电器放置在通风良好的场所 |
外 观 尺 寸 | 120X67X41mm | |
壳 体 结 构 | ABS+PC Plastic housing, inlet type C8 or C14 |
电源指示灯 | 红色 | 接通电源 |
电量指示灯 | 不亮 | 未接电池 |
全亮 | 充电完成 |
全闪 | 故障 |
轮流亮 | 充电中 |
输出短路保护 | 有 | |
输出反接保护 | 有 | |
效 率 | >80% | 满载 |
重 量 | 270g |
详细描述
G60-12F4 is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for 12.8V(4s) Li-Fe battery pack charging. G60-12F4 programmed 3 auto stages (Ip-Im-Um) charging process, It is designed for 3~25Ah LiFePo4 battery pack. Stage "Ip" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. When the battery recovered by pre-charge small current, stage "Im" will give bulk current charging (up to 50W). Then, "Um" stage is followed, the output voltage is limited on C.V point, until the charge current declined to 0.4A (for 3A C.C) or 0.2A (for 1.5A C.C.). At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, G60-12F4 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G60-12F4 will inter protection mode when the battery polarity reversed our the output connectors shorted.
