用途:印制线路板数控钻工艺定位孔钻孔及装销钉的专用设备
Purpose:for printed circuit board NC drilling and pin installation
特点:1.采用日本三菱可编程序器(PLC)控制性能稳定,安全可靠,质量达到国外同类产品水平;
2.钻孔主轴采用中频电主轴,具有转速高、噪音低、钻孔精度好、使用寿命长等特点;
3.钻孔装销钉一次完成,销钉高度可任意调节
Feature:
1.MITSUBISHI PLC controling, stable, safe and reliable; 2. Drilling spindle with IF elctrical spindle, is of high speed, low noise, fine drilling accuracy and long service life; 3.Drilling and installation done once, pin height is adjustatble.
.
主要参数:Technical data
主轴转速 Speed of main shaft | 24000r/min 无极可调stepless adjustable |
中频电源 Inverter | 进口变频器 Imported transducer |
可钻孔印制板 Production size | 最大尺寸Max size: 760x760mm |
最小尺寸Min size: 200x150mm |
电源及功率 Power supply | 单相 220V 50Hz 0.8kw |
气压及耗气量 Air pressure | 5kgf/cm² 0.15m/min |
设备外形尺寸 Machine size | 1130x680x1640mm |