光伏打桩机大功率光伏打桩机小型打桩机安全作业十项留意
Photovoltaic pile driver, high-power photovoltaic pile driver, small pile driver safety operation ten attention
小型打桩机的个头较小，在作业时愈加灵敏方便，相对投入资本较少，可是报答却许多，所以在平时的修建地基打桩施工中常常能够见到小型打桩机的身影。可是在工程作业时必定要留意安全操作。
Small size piling machine is smaller, more sensitive and convenient in the operation, relatively less capital, but a lot of return, so in the ordinary construction of foundation pile construction often can see the figure of small piling machine. But in engineering work, we must pay attention to safe operation.
小型打桩机安全作业需求留意的内容有哪些？
What are the contents of the safety requirements for small piling machines?
榜首、打桩机在进行作业前，指挥人员和操作人员要先进行信号的核对，这样才干保证在施工时的沟通不会出现过错。
At the top of the list, before the piling machine is carried out, the commanders and operators should check the signals first, so that the communication will not be wrong in the construction.
第二、正式开端作业时要淸散周围相关人员，以防安全事故发生。
Second, when the official start work, we should disperse the surrounding personnel to prevent accidents.
第三、打桩机在发动的时分，要从低速逐步的加快到高速。
Third. When the piling machine starts, it should be accelerated from low speed to high speed.
第四、在施工前要对打桩机的螺栓是否有松动。
Fourth, before construction, whether the bolts of piling machine are loose.
第五、接长管柱或桩及装置桩帽时，作业人员有必要佩带安全带。
Fifth, when a long pipe string or pile and a pile cap are installed, it is necessary for the operator to wear a seat belt.
第六、打桩机停止作业后，要当即切断电源，并对打桩机和电动机进行查看和保养。
Sixth. When the piling machine stops working, it should cut off the power immediately and check and maintain the piling machine and motor.
第七、打桩机假如长时间停用，则应该入库保管，要对电动机做好防潮保护。
Seventh. If the pile driver is out of use for a long time, it should be kept in storage, and the motor must be well protected against moisture.
第八、在作业时，操作人员要是个重视操控盘上的电流、电压指示情况，若出现异常，则应当即停机查看。
Eighth, during the operation, if the operator attaches importance to the current and voltage indication on the control panel, if there is an exception, it should stop to check.
第九、在下沉过程中，管柱周围禁止站人，并且禁止进行保养和保护作业。
Ninth. In the process of sinking, people are not allowed to stand around the pipe string, and maintenance and protection operations are prohibited.
第十、打桩机合作射水、吸泥下沉时，应与有关人员预先联络，以方便在作业时更好地合作。
Tenth. When the piling machine cooperates with water injection and suction, it should contact the personnel concerned in advance to facilitate better cooperation in operation.
安全出产永远是榜首位，所以在把握打桩机操作技巧的一起，更应该把握一些安全作业需求留意的内容
Safety production is always the top priority. Therefore, when we grasp the operation skills of piling machines, we should grasp the contents of some safety work needs.
产品阐明：咱们螺旋钻机能够依据不同配车进行改装，只需您供给对应的配车咱们给到您适宜的计划能够进行改装，产品内部给您做一个简略介绍，动力机头内部选用引入的是美国进口的马达供给满足动力，一起机头也是咱们的核心产品，为国内外多家动力出产厂家供给动力处理计划，齿轮箱选用行星齿两层变速齿轮供给动力变速，保证齿轮正常工作，大大增加适用性，处理全球不同当地不同土质的施工现场，输出轴承选用非移位轴，保证桩孔精度和使用寿命.托架介绍：起移动托举的效果，共同的万向轮规划，在施工过程中避免不良操作震动带给机身危害，以上为螺旋钻机部分介绍，假如有疑问，欢迎随时咨询
Product clarification: we can refit the spiral drill according to the different vehicle, only need you to supply the corresponding matching car, we can give you the appropriate plan to be modified, the product inside give you a brief introduction, the internal selection of power engine is imported by the United States Ma Dagong to satisfy the power, together with the machine is us The core products provide dynamic processing plan for many domestic and foreign producers of power production. The gear box uses two layers of planetary gear gear to provide power transmission to ensure the normal work of the gear, greatly increase the applicability and deal with the different local different local soil construction sites. The output bearing selects non displacement axis to ensure the pile Kong Jing. Degree and service life. Bracket introduction: the effect of lifting lift, common universal wheel planning, in the construction process to avoid adverse operation vibration to the fuselage harm to the fuselage, the above is a spiral rig part introduction, if there are questions, welcome to consult at any 该机适用于：光伏螺旋桩旋桩工程，钻孔工程，地质勘探、建筑工程、工程爆破等工程。动力配置：采用国内一流4105涡轮增压发动机，功率可达61kw，为施工作业提供了可靠的动力来源。
液压系统：先进的液压系统，高品质的液压元件严格装配工艺保证液压系统的高效性和耐久性，油泵动力头2000nm，限度的保证打桩机工作稳定性与机械耐用程度。该机适用于：光伏螺旋桩旋桩工程，钻孔工程，地质勘探、建筑工程、工程爆破等工程。
动力配置：采用国内一流4105涡轮增压发动机，功率可达61kw，为施工作业提供了可靠的动力来源。
液压系统：先进的液压系统，高品质的液压元件严格装配工艺保证液压系统的高效性和耐久性，油泵动力头2000nm，限度的保证打桩机工作稳定性与机械耐用程度。该机适用于：光伏螺旋桩旋桩工程，钻孔工程，地质勘探、建筑工程、工程爆破等工程。
| 产品名称 | sx-20装载机护栏打桩机 | |
| 配备动力 | 20（四缸发动机） | |
| 强风散热 | 有 | 标配 |
| 钻孔深度 | 1.5（m） | |
| 钻孔直径 | 150(mm) | |
| 尺寸 | 5300*1800*2780mm | |
| 液压锤冲击频率 | 13-18hz | |
| 液压锤流量 | 60-85l/min | |
| 液压锤工作压力 | 14-16Mpa | |
| 液压系统流量 | 55-65ml/r | |
| 轮距 | 1670mm | |
| 整机质量 | 3000kG | |
| 260锤头*1 | ||
| 配件 | 锤饼*2 | |
| O型圈套组*1 | ||
| 扳手工具套件*1 | ||
| 产品名称 | sx-20装载机护栏打桩机 | |
| 配备动力 | 20（四缸发动机） | |
| 强风散热 | 有 | 标配 |
| 钻孔深度 | 1.5（m） | |
| 钻孔直径 | 150(mm) | |
| 尺寸 | 5300*1800*2780mm | |
| 液压锤冲击频率 | 13-18hz | |
| 液压锤流量 | 60-85l/min | |
| 液压锤工作压力 | 14-16Mpa | |
| 液压系统流量 | 55-65ml/r | |
| 轮距 | 1670mm | |
| 整机质量 | 3000kG | |
| 260锤头*1 | ||
| 配件 | 锤饼*2 | |
| O型圈套组*1 | ||
| 扳手工具套件*1 | ||
桩工机械种类：打桩机 | 品牌：晟旭 | 型号：各种型号 |
外形尺寸：520*240*190cm | 钻孔直径：300mm | 钻孔深度：4m |
回转速度：见产品m | 回转角度：360° | 动力头功率：15kw |
动力头转速：120rpm | 最大扭距：2kn.m | 爬坡能力：30° |
行走速度：5km/h | 整车重量：5t | 可配钻杆类型：见产品 |
规格：见产品 |
| 所有尺寸及规格仅供参考，如需变动不另行通知如有疑问或质询，请拨打官方电话17753787834 |
