德国BAMO流量传感器BAMOFLU 100探头BF1200/1250
品牌：德国BAMO
名称：流量传感器探头
型号：BAMOFLU 100&BF1200/1250
我司经营欧美日本各品牌型号工业品，欢迎咨询！
--------------------------------------------------
-网上价格不是实际价格，如需询价请QQ、旺旺或来电；
-昭研将竭诚尽心为您服务，找到满足您需求的工业品！
-电话：13151052622（微信同号）
-Q Q：1762232206
-邮箱：njzyjd@foxmail.com
-原装进口正品、价格优惠、顺丰到司、客户至上的服务；
-我司工业品价格受汇率等影响，报价一月后请重新询价！
--------------------------------------------------
产品范围：
德国BAMO流量计、BAMO流量传感器、BAMO电导率传送器、BAMO电导率探针、BAMO电导率检测仪
品牌介绍：
BAMO电导率检测仪可直接测量和分析有色金属材料及其合金的电导率值如测量银、铜、铝、镁、钛、奥氏体等及其合金的电导率值。同时也用于间接测量和评价与金属材料电导率有密切关系的参量，如合金识别和验证、热处理状态和热损坏验证、材料力学评估、决定粉末合金零部件的密度等技术参数：工作频率：60KHZ，电导率测量范围：5.0-64MS/m或8.6-110.0%IACS，灵敏度：1%测量精度：?%—?%（在5.0—29.9MS/m范围时?%,在30—64MS/m范围时?%），提离补偿：补偿达0.1mm，小检测平面范围：Ф16mm，环境范围：0-90%，相对湿度，0-45℃，可靠工作电池电压：4?.2V”AA”充电电池（Ni-MH/Ni-cd）或”AA”碱性电池功率：电池为1800mA/h，不用背光持续工作时间约为60小时，显示：LCD液晶，有背光灯功能，主机重量：1Kg，主机尺寸：195?35?0mm，仪器特点：●探头具备互换性，用户可自行更换探头●采用单片机数据处理，读数可靠●良好温度补偿确保仪器可靠、稳定●测量的计量单位MS/m或%IACS变换方便●体积小、易携带、能耗低，有背光功能。使用范围：●铝，铜加工工业中的电导率测试●在航天和汽车工业中，监控热处理过程，锻铝合金的强度和硬度●铝阳极氧化之前电导率检验●检验材料纯度等级和废料分选●结构和储存:外包装为铝合金防水箱,内装仪器、充电器、探头、标准试块BAMO电导率探针、BAMO电导率检测仪
流量传感器BAMOFLU 100
Wetted parts: PPH - PVDF – Stainless steel
Speed flow range: 0.8 to 10 m/s
Power supply: 24 V DC
No pressure drop
Fittings:
PVC - PPH – PVDF Tees
Stainless steel weld-on adaptors
Collars
Output: square pulses
Loaded fluids: particles < 2%
From DN 15 to DN 600
PRINCIPLE
The flowing fluid maintains in rotation the five blades rotor.
Each blade has a built-in magnet, not in contact with the fluid.
The magnetic field variation induces a pulsating signal with its frequency proportional to the fluid speed.
Our sensor emits a signal frequency about 38 to 45 Hz/m/s (depending of process parameters).
This measurement method assures an excellent response with flow velocity (the minimal flow velocity is 0.8 m/s).
The flow could be loaded up to 2% of non magnetic particles.
The fluid viscosity value should be between 0.5 to 20 cSt at process temperature, otherwise a calibration on site is necessary.
MOUNTING
Flow sensor and installation fittings are available for pipes from DN 15 to DN 600, in stainless steel, PVC, PPH and PVDF.
Te fittings are available from DN 15 to DN 50, and collars from DN 40 to DN100.
Weld on adaptors in stainless steel are convenient from DN 50 to DN 600; same figures for glued or polyfusion adaptors proposed in PVC, PPH and PVDF.
The sensor works in any position and on both flow directions.
It is necessary to respect pipe straight lengths upstream and downstream in order to avoid turbulences.
TECHNICAL FEATURES
Output frequency:
38 to 45 Hz (depends of process)
Square signal 5 to 24 V DC
Power supply:
24 V DC - 30 mA
Sensor protection against reversed polarity
Speed flow range: 0.8 to 10 m/s
Accuracy: ±1% full scale
Repeatability: ±0.5 %
Linearity: ±1 %
Maximal pressure:
10 bar at 20°C / PPH, PVDF
25 bar / Stainless steel
Maximal temperature:
85°C / PPH
100°C PVDF, Stainless steel 316 L
Body sensor: PPH – PVDF – Stainless steel 316 L
Rotor: 5 blades in E-CTFE (Halar)
Rotor bearings: Ceramic (AL2O3)
Sealing: O-ring FPM on standard – EPDM on request
Wiring: With DIN 43650 plug - IP65
探头BF1200/1250
? Cell factor K = 1
? Fitting PG 13.5
? Body: Glass tube ? 12 mm
? Platinum measuring elements
APPLICATIONS
BF 1200 conductivity cell is designed for low and high conductivity measurements.
In use with our monitor BAMOPHAR, this cell allows accurate measurements on clear solutions from 0.5 μS/cm.up to 2 mS/cm.
DESCRIPTION
BF 1200 cell is available with fitting PG 13.5 and a body made of glass (diam. 12 mm and 120 mm long).
In order to protect the measuring tube and connector integrity, they may be supplied with a cell holder for flow or immersion measurement.
BF 1200 cell is connected with a coaxial connector type 9054.
DEDICATED CELL HOLDERS
For BF 1200 cells:
These conductivity cells are similar to pH electrodes. Being able to withstand pressure and temperature and being of the same shape, it
is recommend to use the same holders as those of the pH series, according applications for in-line or immersion measurements.+60 °C
