德国BAMO电磁流量计755 303
南京昭研机电设备有限公司
中国 南京
产品属性
图文详情
品牌推荐
品牌
德国BAMO
型号
755 303
原理
电磁流量计
用途
多相流量计
公称通径
25mm
工作压力
1300MPa
适用介质
25
工作温度
50℃
测量范围
3000m³/h
精度等级
3
测量精度
0.01
安装形式
12
流量范围
120
加工定制
否
外形尺寸
23mm
重量
3kg
德国BAMO电磁流量计755 303
品牌：德国BAMO
名称：电磁流量计
-网上价格不是实际价格，如需询价请QQ、旺旺或来电；
-昭研将竭诚尽心为您服务，找到满足您需求的工业品！
-电话：13151052622（微信同号）
-Q Q：1762232206
-邮箱：njzyjd@foxmail.com
-原装进口正品、价格优惠、顺丰到司、客户至上的服务；
-我司工业品价格受汇率等影响，报价一月后请重新询价！
----------------------------------------------------------------
产品范围：
德国BAMO流量计、BAMO流量传感器、BAMO电导率传送器、BAMO电导率探针、BAMO电导率检测仪
品牌介绍：
BAMO电导率检测仪可直接测量和分析有色金属材料及其合金的电导率值如测量银、铜、铝、镁、钛、奥氏体等及其合金的电导率值。同时也用于间接测量和评价与金属材料电导率有密切关系的参量，如合金识别和验证、热处理状态和热损坏验证、材料力学评估、决定粉末合金零部件的密度等技术参数：工作频率：60KHZ，电导率测量范围：5.0-64MS/m或8.6-110.0%IACS，灵敏度：1%测量精度：?%—?%（在5.0—29.9MS/m范围时?%,在30—64MS/m范围时?%），提离补偿：补偿达0.1mm，小检测平面范围：Ф16mm，环境范围：0-90%，相对湿度，0-45℃，可靠工作电池电压：4?.2V”AA”充电电池（Ni-MH/Ni-cd）或”AA”碱性电池功率：电池为1800mA/h，不用背光持续工作时间约为60小时，显示：LCD液晶，有背光灯功能，主机重量：1Kg，主机尺寸：195?35?0mm，仪器特点：●探头具备互换性，用户可自行更换探头●采用单片机数据处理，读数可靠●良好温度补偿确保仪器可靠、稳定●测量的计量单位MS/m或%IACS变换方便●体积小、易携带、能耗低，有背光功能。使用范围：●铝，铜加工工业中的电导率测试●在航天和汽车工业中，监控热处理过程，锻铝合金的强度和硬度●铝阳极氧化之前电导率检验●检验材料纯度等级和废料分选●结构和储存:外包装为铝合金防水箱,内装仪器、充电器、探头、标准试块BAMO电导率探针、BAMO电导率检测仪
? The most competitive on the market
? Ranges from 0.25 l/min up to 150 l/min
? Pulse output
? Small dimensions
APPLICATIONS
- Mechanical and industrial engineering fields
- Cleaning process
- Liquid dosage
- On board skids, etc.
DESCRIPTION
BAMOMATIC is a flowmeter based on the principle of electromagnetic induction to measure flow-rate on electrically conductive liquids ( > 20 μS/cm). They are perfectly suited for dosing or totalizing liquids.
Each instrument is calibrated on a bench test at ± 5 pulses for 1000 pulses (Water at 20 ° C). Density of the liquid, its temperature or its pressure have no influence on the measurement; No moving parts in this flow-meter: it ensures operatings without mechanical wear.
The measuring principle is based on Faraday's law.
In an electromagnetic flow-meter, the liquid section is in a magnetic field created by solenoid coils. Electrode sensors are on plane perpendicular to this field, in contact with the (conductive) liquid and allow measurement of the generated voltage. This voltage is directly proportional to the fluid velocity and therefore to the flow rate (for a constant flow section).
TECHNICAL FEATURES
Power supply: 24 V DC / ±3 V DC
Output signal: NPN Type
Status indicators:
Red LED = power
Green LED = output pulses
Electrical connection DIN 43650-A plug
Fittings ?" ; ?" ; 1” (according the model)
Nominal diameter 8, 14 or 18 mm (according the model)
Wet parts materials:
Measuring tube material in PVDF (Red housing)
Option: Delrin (Blue housing)
Electrodes AISI 316 L
Conductivity lower limit: 20 μS/cm
Pressure limits:
10 bar at 20 °C
8 bar at 40 °C
6 bar at 60 °C
品牌：德国BAMO
名称：电磁流量计
型号：755 303
我司经营欧美日本各品牌型号工业品，欢迎咨询！
-网上价格不是实际价格，如需询价请QQ、旺旺或来电；
-昭研将竭诚尽心为您服务，找到满足您需求的工业品！
-电话：13151052622（微信同号）
-Q Q：1762232206
-邮箱：njzyjd@foxmail.com
-原装进口正品、价格优惠、顺丰到司、客户至上的服务；
-我司工业品价格受汇率等影响，报价一月后请重新询价！
----------------------------------------------------------------
产品范围：
德国BAMO流量计、BAMO流量传感器、BAMO电导率传送器、BAMO电导率探针、BAMO电导率检测仪
品牌介绍：
BAMO电导率检测仪可直接测量和分析有色金属材料及其合金的电导率值如测量银、铜、铝、镁、钛、奥氏体等及其合金的电导率值。同时也用于间接测量和评价与金属材料电导率有密切关系的参量，如合金识别和验证、热处理状态和热损坏验证、材料力学评估、决定粉末合金零部件的密度等技术参数：工作频率：60KHZ，电导率测量范围：5.0-64MS/m或8.6-110.0%IACS，灵敏度：1%测量精度：?%—?%（在5.0—29.9MS/m范围时?%,在30—64MS/m范围时?%），提离补偿：补偿达0.1mm，小检测平面范围：Ф16mm，环境范围：0-90%，相对湿度，0-45℃，可靠工作电池电压：4?.2V”AA”充电电池（Ni-MH/Ni-cd）或”AA”碱性电池功率：电池为1800mA/h，不用背光持续工作时间约为60小时，显示：LCD液晶，有背光灯功能，主机重量：1Kg，主机尺寸：195?35?0mm，仪器特点：●探头具备互换性，用户可自行更换探头●采用单片机数据处理，读数可靠●良好温度补偿确保仪器可靠、稳定●测量的计量单位MS/m或%IACS变换方便●体积小、易携带、能耗低，有背光功能。使用范围：●铝，铜加工工业中的电导率测试●在航天和汽车工业中，监控热处理过程，锻铝合金的强度和硬度●铝阳极氧化之前电导率检验●检验材料纯度等级和废料分选●结构和储存:外包装为铝合金防水箱,内装仪器、充电器、探头、标准试块BAMO电导率探针、BAMO电导率检测仪
? The most competitive on the market
? Ranges from 0.25 l/min up to 150 l/min
? Pulse output
? Small dimensions
APPLICATIONS
- Mechanical and industrial engineering fields
- Cleaning process
- Liquid dosage
- On board skids, etc.
DESCRIPTION
BAMOMATIC is a flowmeter based on the principle of electromagnetic induction to measure flow-rate on electrically conductive liquids ( > 20 μS/cm). They are perfectly suited for dosing or totalizing liquids.
Each instrument is calibrated on a bench test at ± 5 pulses for 1000 pulses (Water at 20 ° C). Density of the liquid, its temperature or its pressure have no influence on the measurement; No moving parts in this flow-meter: it ensures operatings without mechanical wear.
The measuring principle is based on Faraday's law.
In an electromagnetic flow-meter, the liquid section is in a magnetic field created by solenoid coils. Electrode sensors are on plane perpendicular to this field, in contact with the (conductive) liquid and allow measurement of the generated voltage. This voltage is directly proportional to the fluid velocity and therefore to the flow rate (for a constant flow section).
TECHNICAL FEATURES
Power supply: 24 V DC / ±3 V DC
Output signal: NPN Type
Status indicators:
Red LED = power
Green LED = output pulses
Electrical connection DIN 43650-A plug
Fittings ?" ; ?" ; 1” (according the model)
Nominal diameter 8, 14 or 18 mm (according the model)
Wet parts materials:
Measuring tube material in PVDF (Red housing)
Option: Delrin (Blue housing)
Electrodes AISI 316 L
Conductivity lower limit: 20 μS/cm
Pressure limits:
10 bar at 20 °C
8 bar at 40 °C
6 bar at 60 °C
Operating temperature -10 ... +60 °C
