我们需要了解轴承变形的原因，因为镇江NSK轴承的工作条件太差，经常超载，导致变形现象，事实上，变形是正常的，但有时轴承的变形会导致其余部位的加速。甚至废品导致安稳生产，这是一个非常严重的问题。如何解决变形问题？今天，安工程师将和我们一起学习。参考文献如下：
We need to understand the causes of bearing deformation, because Zhenjiang NSK bearing working conditions are too poor, often overloaded, resulting in deformation, in fact, deformation is normal, but sometimes the deformation of the bearing will lead to acceleration of the rest of the parts. Even waste products lead to stable production, which is a very serious problem. How to solve the problem of deformation? Today, Ann engineer will study with us. The references are as follows:
1，生产中的冷凝措施。
1, condensing measures in production.
淬火过程也会影响镇江NSK轴承变形金属的变形。油淬火变形小于冷油淬火，通常控制在100~200℃，油冷凝变形也很重要。搅拌变形淬火的要点和速度。冷凝速度越快，非对称冷凝越大，压力越大，不锈钢轴承越大。
Quenching process will also affect the deformation of Zhenjiang NSK bearing metal. Oil quenching deformation is less than cold oil quenching, usually controlled at 100~200 C, and oil condensation deformation is also very important. The key points and speed of stirring deformation quenching. The faster the condensing speed, the greater the asymmetrical condensation, the greater the pressure, the greater the stainless steel bearing.
2，使用公平的媒体。
2, use fair media.
结果表明，油介质的冷凝速度比水介质的快，水介质的冷凝速度比水介质快。
The results show that the condensation speed of oil medium is faster than that of water medium, and the condensation speed of water medium is faster than that of water medium.
3，其余布局要公平。
3, the rest of the layout should be fair.
在镇江NSK轴承金属热处理的冷凝过程中，其总是薄的，其中有些是快速和厚的。轴承的损坏和振动非常严重。因此，该轴承振动测量仪可以测量振动（频率平移等）以及将来非常详细的频率测量结果。由于测量值与轴承或传感器的位置之间的工作条件不同，有必要对测量机的预设尺寸进行比较和澄清。
In the condensation process of heat treatment of Zhenjiang NSK bearing metal, it is always thin, some of which are fast and thick. The damage and vibration of bearings are very serious. Therefore, the bearing vibration measuring instrument can measure vibration (frequency translation, etc.) and very detailed frequency measurement results in the future. It is necessary to compare and clarify the preset dimensions of the measuring machine because the working conditions between the measured values and the positions of bearings or sensors are different.
轴承的类型和类型不同，所使用的镇江NSK轴承钢也会有一些差异。钢牌号不同的主要原因是轴承钢的化学成分和含量不同。轴承钢的化学分析通常是通过光谱分析来进行的。在轴承钢的鉴定中，鉴定的主要内容是检测钢中合金元素的组成。有两种主要的识别方法，即火花检测和手持式光谱学。
The bearing types and types are different, and there will be some differences in the use of Zhenjiang NSK bearing steel. The main reason for the difference of steel grades is that the chemical composition and content of bearing steel are different. Chemical analysis of bearing steel is usually carried out by means of spectral analysis. In the identification of bearing steel, the main content of the identification is to detect the composition of alloy elements in steel. There are two main methods of identification, namely spark detection and handheld spectroscopy.
文章来自：镇江SKF轴承 www.wh-skf.com
The article is from: Zhenjiang SKF bearing www.wh-skf.com
文章来自：镇江INA轴承 www.ina-china.cn
The article is from: Zhenjiang INA bearing www.ina-china.cn
文章来自：镇江NSK轴承 www.klbbearings.com
The article is from: Zhenjiang NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
