C2T系列开环型可拆卸霍尔电流传感器的初、次级之间是绝缘的，用于测量直流电流。

C2T series dismountable hall effect current Sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.

· 交流变速驱动器

AC variable  speed drives

· 直流电机驱动静态转换器

Static converters for DC motor drives

· 变频调速系统

Variable speed drives

· 电焊机

Power supplies for welding applications

· 通讯电源

Battery supplied applications

· 不间断电源UPS

Uninterruptible Power Supplies (UPS)

· 开关电源

Switched Mode Power Supplies (SMPS)

Remarks：

1. All dimensions are in mm.

2. General tolerance ±1mm.

3. Elucidation: 1:+12V 2:OV 3:V0UT 4:NC

1. 当待测电流从传感器穿过，即可在输出端测得电压大小。(注意：错误的接线可能导致传感器损坏) When the current will be measured goes through a sensor, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the sensor)

2. 传感器的输出幅度可根据用户需要进行适当调节。

Customs can adjust output amplitude of the sensor by needs.

3. 可按用户需求定制不同额定输入电流和输出电压的传感器。

Custom design in the different rated input current and the output voltage are available.

· UL94-V0.

· EN60947-1:2004

· IEC60950-1:2001

· EN50178:1998

· 

SJ 20790-2000