性能特点/Features
1.配套使用荣邦研磨夹具无需调整设备，去除散件及工艺的影响，干涉可达到100%直通率；
2.触屏操作，支持超过12种程序储及调用，更换产品时只需在触屏上选择相应的产品即可，无需繁锁调整压力，时间，转速，简化操作过程及强度，提高质量稳定性；3.可以对调速，压力，时间，缓慢启动 加压，研磨补偿参数及每道的研磨垫等参数进行单独设定，研磨过程中实时显示相关参数的设定值及当前实际值；4.结构更稳定，压力范围更宽，研磨过程中压力基本无任何跳动。可同时研磨36个以上SC而保持设备稳定（100%3D)；5.支持缓慢启动，缓慢加压，研磨补偿研磨时间逐步递增等高级功能选项，有利于保证产品质量，同时减少研磨片损耗；6.主要原器件采用国际知名品牌，主题结构经过3年左右的时间实验，结构寿命及精度保持时间长。
1.Without connector parts and operation technics drawbacks, the 3D pass rate of the polisher reaches 100% by use of fixtures of Rongbang.
2.12 sets of programs stored on the polisher, touch screen operated. When using the polisher, you can choose the corresponding program on the touch screen, according to the connectors you are going to polish, no need to adjust the pressure, time, and speed. Simplify the operation process and labor amount, improve the quality and stability at the same time.
3.For each program, speed, pressure, time, and polishing pad perimeters are adjustable. The set value and current actual value of relevant parameters are displayed in real time during the polishing process.
4.The machine structure is more stable. The pressure range is wider. During the polishing process, no jumping is occurred. It can polish 36pcs of SC connectors smoothly with 100% 3D pass rate.
5.Slow start, slow pressurization, gradual increase of compensation of polishing time are available. These high level function can ensure polishing quality while save polishing films.
6.The main components of the machine adopts famous international brands. Main structure has been tested for 3 years. Structure durability and accuracy constancy last long.
