产品介绍
使用井下压风管道体系作为动力源。重量轻，易带着；构造科学，便于作业。 思礼镇FDJ-120/矿用防爆切割锯
·可切开管道、电缆、角钢、构造钢、U型钢、链条、锚杆、锚索等。
·锢金属钢合金锯条，耐高温、耐冲突、运用寿数长。适用于锯割不锈钢、镍基合金、铁、铜、铝、玻璃、塑料、木材等。
技术参数：
类型 | 功率 | 耗气量 | 切开厚度 | 切开宽度（直径） | 锯片速度 | 重量 |
FDJ-120 | 0.5kw | 0.6m3/min | 三种锯片： 0—30mm 30—50mm 50—120mm | 120mm | 60m/min | 6kg |
FDJ-180 | 1.0kw | 1.2m3/min | 180mm | 90m/min | 10kg | |
FDJ-230 | 1.5kw | 1.5m3/min | 230mm | 120m/min | 16kg |
FDJ-230风动切割锯长处
1：90°直切,45°斜切,立式切开一体机。
2：运转速度只要砂轮机的1/60,安全无火花。
3：切缝窄0.5mm,切开外表平整，精度高，无挂渣，无脱碳。
4：锯条使用寿命长，单位切开成本低，一根锯条使用寿命等同于50-80片砂轮切开片，较电能锯节能60%
FDJ-120风动切割锯使用方法：
1、了解所需切开的资料，如有必要能够经过下降空气压力来下降锯片的滚动速度。矿用锚杆锚索切割锯宁夏 优质
2、保证结实固定了所需切开的资料，避免其移动。
3、气动空气马达时，用手指按压阀杆，然后开端切开。
4、用锯的分量来操控切开压力。关于较软的资料来说，这么的分量已经满足。过多的压力会下降锯片的速度。关于较硬的资料，能够经过加压的方法来下降锯片的滚动速度。切开是坚持锯垂直。锯片的任何歪曲或倾斜都也许下降其使用寿命。（留意：避开切开后也许坠落的碎片。切开行将完结时，切勿使锯碰到您的身体、工件或邻近的其它人员。）
5、封闭空气马达时，开释阀杆。
6、下次切开开端前，锯片有必要坚持运动状况。气动锯时，锯片不能触摸任何外表。
7、断开空气软管时，封闭空气软管阀。断开前，先翻开空气阀给软管减压。
8、替换锯片前，有必要断开空气软管，并推进阀杆以开释掉马达内的压力。
9、顺时针滚动调整手柄以便开释锯片导杆上的张力。然后开释侧面板的锁以便翻开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。
联系人金经理电话13934240041
Usage method：
1, understand the material needed to cut, if necessary to reduce the speed of rotation of the saw blade by reducing the pressure of the air.
2, ensure that the required cutting material is firmly fixed to prevent its movement.
3. When pneumatic air motor is operated, the stem is pressed with the finger, and then the cutting is started.
4, use the weight of the saw to control the cutting pressure. This weight is enough for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of rotation of the saw blade can be reduced by pressure. The cutting is to keep the saws straight. Any twist or skew of the sawblade may reduce its service life. (notice: avoid debris that may fall after cutting. When the cutting is about to be finished, do not make the saw touch your body, the workpiece, or the other people in the vicinity.
5. When the air motor is closed, the stem is released.
6. The saw blade must remain moving before the next cutting begins. The saw blade can't contact any surface when a pneumatic saw.
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose.
8. Before replacing the saw, be sure to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod.
