GS-02塑料表面印刷专用水性油墨（凹印水墨、柔印水墨）
产品简介：
该系列产品采用纳米级有(无）机颜料、进口特种水性树脂和相关助剂，经过一定的反应而制成的高档水性油墨；产品无VOCs排放，无毒无味，不易燃易爆，无安全隐患，色彩展色力强；广泛适印于HDPE、LDPE、OPP、PO等表印塑料基材，是我公司专门为塑料凹版和柔版表面印刷而设计的高档水性油墨。
适印范围：
1.基材：HDPE、LDPE、OPP、PO等。
2.用途：商超背心袋、连卷袋、购物袋、快递袋、PE电子产品袋、生物降解袋等表面印刷。
产品优势：
1.（品质优秀）产品成熟，性能稳定，储存时间长,印刷适性好；
2.（节约成本）固含量及色含量高，粘度稳定，流动性好；
3.（性能优异）粒径小，粒子分布均匀，快干性及流平性好；
4.（展色力强）纳米级颜料，色彩展色力强，浅网转移清晰，具有优异的转印性和重涂性；
5.（印品稳定）优异的附着力及耐水性、耐磨性；
6.（适印性佳）印刷适应性强，能适印HDPE、LDPE、OPP、PO等不同塑料薄膜。
产品颜色：
1.原红、原黄、原蓝、黑、白五个基本色；
2.可根据客户提供Pantone色卡号提供定制专色。
产品包装：
塑料桶包装，净重：20公斤/桶或1吨装。
产品储存：
密封储存12个月以上，避免阳光直射；未使用完请密封储存，防止水分挥发造成粘度上升或结皮干固及灰尘掉落。
注意事项：
1.由于印刷设备、印刷基材及制版工艺的不同，将直接影响到印刷效果，我司将根据不同客户的实际情况，提供相应的技术参数。
2.使用前应搅动均匀,请勿与其他品牌油墨混合使用，保持水性油墨成分一致，以免影响墨性；余墨若含杂质，先过滤再配合新墨使用。
GS-02 Special Water-based ink for plastic surface printing
(Gravure printing ink 、Flexographic printing ink)
Description:
The series products adopt Nano-organic（inorganic）pigments and imported special water resin and related additives to made a kind of high-grade Water-based ink through certain physical reactions; The products without VOCs emissions, non-toxic, odorless, non- flammable and explosive,no potential safety hazard ,strong color display; widely application in HDPE, LDPE, OPP and PO ect.plastic films in surface printing, it is the high-grade water-based ink that we special design for Gravure and Flexographic surface printing.
Suitable application:
1. Materials: HDPE,LDPE,OPP,PO ect.
2. Application: supermarket’s vest bags, roll bags, shopping bags, courier bags, PE electronic products bags, biodegradable bags ect. surface printing.
Product advantages:
1. (Excellent quality)Mature products, stable performance, long storage time, good printability;
2. (Cost-saving) High solid content and color content, low viscosity, good fluidity;
3. (Excellent performance) The small particle size, particle distribution, fast drying and good leveling;
4. (Strong color display) Nana-pigments, strong color display, clear on network transfer, with excellent transfer printing and recoalability;
5. (Printing stability) Excellent adhesion and water resistance, abrasion resistance;
6. (Good printability) Strong printing adaptability, suitable for HDPE, LDPE,OPP and PO ect.various plastic films.
Product color:
1. The original Red、Yellow、Blue, Black, White, five basic colors;
2. Gold, Silver, Pink, Orange red, Emerald, Bright red, ect. spot color;
3. Acceptable color customized according to customer’s Pantone color numbers.
Package:
By plastic barrel, net weight: 20 kg / barrel.
Product storage:
Sealed storage more than 12 months, avoiding sunlight direct; Please sealed the remain ink to prevent moisture evaporation and to avoid the viscosity increase or dried-Solid and the dust falls.
Notes:
1. It will directly affect the printing effects due to the different of printing device, printing substrates and plate-making process, so we will provide technical parameters according to the customer's actual situation.
2.Please stirred ink well before using,in order to avoid affect the properties of ink and keep the composition consistent of water-based ink ,please do not mix up with other brands of ink; If remain ink with impurities, filters first and then use again with new ink.
