DESCRIPTIONS 描述

Fluid grease formulated with excellent quality graphite and high viscosity base oil. Its very structure provides it with a great adhesion to metallic surfaces. The base oil is bitumen free, then it can work at temperature up to −15ºC without heating.

本品是由优质石墨和高粘度基础油配制而成的液体润滑脂，其结构能够使其强力附着在金属表面上。基础油不含沥青，在-15℃时不重新加热仍可正常使用。

APPLICATIONS 应用

G. BESLUX CROWN L FLUID is intended for : Service lubrication by dipping, circulating or mix (dipping + circulating) of girth gears in cement manufacturing plants, in the steel industry, carbon, minerals treatments, fertilizers, chemical products etc... (kilns, grinders, dryers, mixers, etc...)

BESLUX CROWN L FLUID可采用浸浴、循环系统、或浸浴式、循环系统两者混合式（浸浴的+循环的）等润滑方式，用于水泥制造厂、钢铁业、碳及矿物加工处理业、化肥、化学加工厂等大型齿轮设备的润滑，（窑炉、研磨机、干燥机、搅拌机等）。产品同样适用喷洒系统进行润滑

G. BESLUX CROWN L FLUID can also be used for the lubrication of heavy loaded reducers, wire ropes, etc.G.BESLUX CROWN L FLUID也可用于高负载下减速箱及绳缆等设备润滑。

INDICATIONS 规范

In case of critical ambient conditions (dust, sand, water, etc.) proceed to change the lubricant once a year. whenever the drive running-in operation or correction has been carried out with G. BESLUX CROWN L FLUID, it is not necessary to change the bath at short term.

因苛刻环境状况（灰尘、砂、水等）原因，BESLUX CROWN L FLUID必须一年更换一次。如果在磨合期或正确地使用BESLUX CROWN R FLUID，无须在短期内更换油品。

CAUTIONS 注意

-The usual ones when handling and using lubricants.

无特殊储运要求。

-Keep the can closed to avoid contamination.

保持瓶罐紧闭，避免污染。

-Do not mix with different nature greases.

切勿跟其它不同类型的脂混用。