一、              基本功能与特点 Features:

1、  本机采用特殊搅拌分离机构,锡渣自动输入进入搅拌区焊锡内部；

Uses special mixing & seperation design, the dross automatically feeded into inner part of mixing part.

2、  锡灰自动分离出来,并排出至锡灰收集箱内；

Automatic separation of tin and tin ash,into the tin and tin-ash collection device.

3、  分离后的焊锡自动进入焊锡贮存箱内,达到一定液位后自动报警,人工打开放锡咀,排放至接锡盘内成形；

Separated liquid pure tin automatically stored in the tin cabin, when it is reaches a certain volum, the alarm system turns on, operator just only need discharge the liquid pure tin into molding tray.

4、  本分离装置无需人工清理高温滤桶内的锡灰,解决了高温危险性；

This machine is no need to clean high temperature filtering cabin to avoid any human damange.

5、  分离率非常稳定,分离后的锡灰呈面粉状,目视基本无明显锡粒；

Stability of high separation rate, powder type ash afterater separation hardly see any solder by visual.

6、  完全符合节能、安全、环保要求；

Suit for energy saving, safty and Econ-friendly requirement.

7、  日处理量：100KG-120KG/8H；

Ability: 100KG-120KG/8H

8、  隔热防护网，避免操作员烫伤，机壳表面温度控制在45度以内.

Heat insulation prevention mesh controls the machine outside temperature within 45℃, which is avoid operator to be hurt.

二、 整机部分 Body：

1、  外壳全部采用不锈钢材料,美观大方,维护方便;

All-stainless steel tank,clean convenience.

2、 电源Power：220V; 

3、 启动功率Totol power consumption：3.6KW;

4、 正常功率Normal running power：≤1.5KW;

5、 净重Net weight：约110KG;

6、 外型尺寸Dimension：660mm(L)X480mm(W)X1000mm(H)

三、 电控部份 Electronic Part：

1、  按键式面板操作控制；

Keyboard panel control

2、  OMRON数显温度表显示温度，温度调节方便直观，控温准确;

OmRON temperature meter vertically display temperature adjustment with accurate temperature.

3、  控温采用PID+SSR模式;

Uses PID+SSR for temperature control

4、  漏电保护装置;

Uses creepage protection device.

四、 搅拌分离系统 Mixing & Separation System：

1、  入口料斗：锡渣容量≤10KG;

Feeding gate: ≤10KG dross

2、  炉胆采用特殊不锈钢316L材料制做;耐腐蚀;耐高温;内部底锡容量 70Kg (max) ,熔解时间：约60分钟;

316L stainess steel oven can bear high temperature and rust. Max. 70kg “bottom tin” stored in empty oven, needs 60mins to be melt when uses the machine

3、  加热系统采用U型发热管,外罩铸铁发热板;防变形;

Uses “U” shape heater covered cast iron heating plate, which is avoid deformation.

4、  独特的搅拌分离系统组件,专利设计;

Patent mixing and separation system.

5、  分离速度：15KG /60分钟

Separation Speed: 15KG /60mins

6、  搅拌电机：台湾成帮高温电机 90W  220V;

Mixing Motor: 90W  220V  Taiwan made motor

7、  锡条/锡灰分离出来的焊锡自动进入独立收集箱内贮存,达到一定液位后报警,人工排出,锡条成形模配送2套,方便更换; 锡灰自动排出至锡灰收集箱内,1套配送,方便更换

Tin Bar/ash: Separated pure tin goes into a cabin, when it reaches a certain volum, the alarm system turns on to inform discharge. Equipped with 1 sets molding tray. Ash goes into collection box, equipped with 2 boexes.

五、 烟雾过滤 Filtering System：

1、  外接排风口径:4寸

Outer exhausting gate: 4".

实物图：