XHD-8960 边压强度试验机

1,本系列试验机可配合多种材料做全方位之测试,在纸张包装材料方面, 进行多种纸张品质测试，即环压（RCT）、平压（FCT）、边压（ECT）、粘合（PAT）及一般抗压（CMT）等5种测试, 是结合多项功能于一身之测试设备。

This series of testing machine can be combined with a variety of materials to do a full range of tests, in the paper packaging materials, a variety of paper quality tests, namely ring pressure (RCT), flat pressure (FCT), edge pressure (ECT), adhesive (PAT) and general compression (CMT), etc.

2, 设计标准：TAPPI-T472、T808、T810、T811、T818, JIS-P8126, GBT 2679.6，GBT 2679.8，GBT 2679.17

Design standards: tappi-t472, T808, T810, T811, T818, jis-p8126, GBT 2679.6, GBT 2679.8, GBT 2679.17

3,主要技术参数：

容量：10,20,50,100,200kg(可任选)；

分解度：1/10,000；

精度：≤1%

显示方式：LED显示

压板：100×100mm或视平压试样直径而定；

压缩间距：80mm；

压板平行度：±0.05mm

环压试样：152.4×12.7mm

边压试样：25×100mm

测试速度：12.7mm/min

马力：1/8HP；

外型尺寸：(L×W×H)430×400×600mm

重  量：40kg；    电  源：1∮，AC220V,1.5A

Capacity: 10,20,50,100,200kg(optional);

Decomposition degree: 1/10,000;

Accuracy: 1% or less

Display mode: LED display

Pressing plate: 100×100mm or depending on the diameter of the flat pressed sample;

Compression spacing: 80mm;

Platen parallelism: ±0.05mm

Ring pressure specimen: 152.4×12.7mm

Edge pressure sample: 25×100mm

Test speed: 12.7mm/min

Horsepower: 1/8hp;

Dimensions :(L×W×H)430×400×600mm

Weight: 40kg; Power source: 1 wire, AC220V, 1.5A

Force sensor

On the pressure plate

Press plate

The printer

interface

用边压/粘合取样器在样品中取规格为：横向25mm（与楞型平行）纵向100mm（与楞

 型垂直）的试样若干(详见边压/粘合取样器说明书)

With the edge pressure/bonding sampler, take the sample size as follows: transverse 25mm (parallel to the flute) and longitudinal 100mm (parallel to the flute)

A number of samples (see specification of edge pressure/adhesive sampler for details)

配合两块边压导块，夹紧试样，放在试验机的下压盘的中心位置

With two edge pressure guide blocks, clamp the sample and place it in the center of the press plate of the testing machine

打印机不需要更换色带

The printer does not need to replace the ribbon