VPCseriesDirectly connected sensor with 2 comparison setting output

■5kPa~100MPa
■50kPa abs~1700kPa abs

* Actual products may differ from photo
  depending on specifications.

■Fast response setting output without microcomputer.
■Easy pressure setting while viewing the digital display.
■High accuracy and long life.
■Can be selected from abundant pressure range.

Measured mediumPressure typePressure range

Air, gases, water, oil, etc.  (Depends on the material of sensor.)

Positive, negative, compound and absolute pressures can be measured.

Pressure sensor series ranging from minute pressure (-1) 0 to 5 kPa to low, absolute, and medium-to-high pressure up to 100MPa are available. (See photos on the right for pressure sensors.)

Specification

Display	1999 3½ digit Super luminosity Red LED(Character height: Approx. 15mm)
Display Conversion Speed	3 times/sec.(Standard), Can be set in the range of 1 to 15 times/s.
Accuracy (*1)	±0.05%F.S.±1digit
Use Temperature Range	0~55°C(No freezing)
Use Humidity Range	0~90%RH(No condensation)
Dimensions	φ104×56(D:Protrusions not included)
Weight	Approx. 650g(Varies with specification)
Accessories	Operation manual (1 copy)(Specify English or Japanese.) Test report (1 copy), (*2)

• (*1) Take into account the accuracy of the pressure sensor selected from .
• (*2) For accessories such as connectors, refer to the pages of .

Model Selection

Selection of Pressure sensor

Refer to  for specification and model numbers and specify the desired model. 
[e.g.] VPC - A - 1.000MPa - 2VAM(HH)2△PF - 1 / VPRQ - 1MP

Selection of Power converter

Only when AC power is used, refer to the , and specify the model.
[e.g.] TUC - AC100V - 3 - 1N

SelectionCheckModelSpecification

1.Model	○	VPC	Round Digital Pressure Meter with 2 Comparison Setting type
2.Casing type		A	Directly connected on bottom side
		B	Directly connected on back side
3.Display/Calibration			Specify the range within the rated capacity of the applicable pressure sensor.(Within 50% of the rated capacity) *Refer to  for the rated capacity.
4.Number of Setting Outputs		-	Output type	Response time	Permission load
		2VA	2 setting / Relay output	6msec. or less	AC250V 4A
		2VAO	2 setting / PhotoMOS relay output	1msec. or less	AC/DC250V 0.1A Peak 400V
5.Setting Method		Blank	Internal adjustment trimmer type
		M	Remote setting knob type
6.Output type		HH	Setting 1 =Higher limit, Setting 2 =Higher limit		*Always specify the output type when placing an order.
		HL	Setting 1 =Higher limit, Setting 2 =Lower limit
		LH	Setting 1 =Lower limit, Setting 2 =Higher limit
		LL	Setting 1 =Lower limit, Setting 2 =Lower limit
7.Differential Value Setting		Blank	Hysteresis=△PF setting: not available
		2△PF	2 Hysteresis=△PF: available Hysteresis setting variable rang: Within 10% of the sensor’s rating *Refer to the Dimension page.
6.Power [Power Consumption]		1	AC100V [5VA]		When specifying AC power, a dedicated power converter "TUC" will be included. Click  for the specifications of power converters.
		11	AC110V [5VA]
		2	AC200V [5VA]
		22	AC220V [5VA]
		3	DC±12V [200mA]
		4	DC24V [100mA]
		5	DC12V [200mA]
7.Indication Conversion Rate (Option)			Indication conversion rate: Standard 3 times/sec. Option( times/sec.) *Specify in the range of 1 to 15 times/s.

VPCseries
Directly connected sensor with 2 comparison setting output

■5kPa~100MPa
■50kPa abs~1700kPa abs

* Actual products may differ from photo
  depending on specifications.

■Fast response setting output without microcomputer.
■Easy pressure setting while viewing the digital display.
■High accuracy and long life.
■Can be selected from abundant pressure range.

Measured mediumPressure typePressure range

Air, gases, water, oil, etc.  (Depends on the material of sensor.)

Positive, negative, compound and absolute pressures can be measured.

Pressure sensor series ranging from minute pressure (-1) 0 to 5 kPa to low, absolute, and medium-to-high pressure up to 100MPa are available. (See photos on the right for pressure sensors.)

Specification

Display	1999 3½ digit Super luminosity Red LED(Character height: Approx. 15mm)
Display Conversion Speed	3 times/sec.(Standard), Can be set in the range of 1 to 15 times/s.
Accuracy (*1)	±0.05%F.S.±1digit
Use Temperature Range	0~55°C(No freezing)
Use Humidity Range	0~90%RH(No condensation)
Dimensions	φ104×56(D:Protrusions not included)
Weight	Approx. 650g(Varies with specification)
Accessories	Operation manual (1 copy)(Specify English or Japanese.) Test report (1 copy), (*2)

• (*1) Take into account the accuracy of the pressure sensor selected from .
• (*2) For accessories such as connectors, refer to the pages of .

Model Selection

Selection of Pressure sensor

Refer to  for specification and model numbers and specify the desired model. 
[e.g.] VPC - A - 1.000MPa - 2VAM(HH)2△PF - 1 / VPRQ - 1MP

Selection of Power converter

Only when AC power is used, refer to the , and specify the model.
[e.g.] TUC - AC100V - 3 - 1N

SelectionCheckModelSpecification

1.Model	○	VPC	Round Digital Pressure Meter with 2 Comparison Setting type
2.Casing type		A	Directly connected on bottom side
		B	Directly connected on back side
3.Display/Calibration			Specify the range within the rated capacity of the applicable pressure sensor.(Within 50% of the rated capacity) *Refer to  for the rated capacity.
4.Number of Setting Outputs		-	Output type	Response time	Permission load
		2VA	2 setting / Relay output	6msec. or less	AC250V 4A
		2VAO	2 setting / PhotoMOS relay output	1msec. or less	AC/DC250V 0.1A Peak 400V
5.Setting Method		Blank	Internal adjustment trimmer type
		M	Remote setting knob type
6.Output type		HH	Setting 1 =Higher limit, Setting 2 =Higher limit		*Always specify the output type when placing an order.
		HL	Setting 1 =Higher limit, Setting 2 =Lower limit
		LH	Setting 1 =Lower limit, Setting 2 =Higher limit
		LL	Setting 1 =Lower limit, Setting 2 =Lower limit
7.Differential Value Setting		Blank	Hysteresis=△PF setting: not available
		2△PF	2 Hysteresis=△PF: available Hysteresis setting variable rang: Within 10% of the sensor’s rating *Refer to the Dimension page.
6.Power [Power Consumption]		1	AC100V [5VA]		When specifying AC power, a dedicated power converter "TUC" will be included. Click  for the specifications of power converters.
		11	AC110V [5VA]
		2	AC200V [5VA]
		22	AC220V [5VA]
		3	DC±12V [200mA]
		4	DC24V [100mA]
		5	DC12V [200mA]
7.Indication Conversion Rate (Option)			Indication conversion rate: Standard 3 times/sec. Option( times/sec.) *Specify in the range of 1 to 15 times/s.