不锈钢穿条在皮带扣连接皮带时，放于两皮带扣中间，起着连接作用，所以是皮带装订的必备用品。

We don't have to run around. We have everything! Stainless Steel Strip in the belt buckle connection belt, placed in the

middle of the two belt buckles, play a connecting role, so it is a belt binding essential supplies.
规格型号示例：
7×1000 表示直径为7mm，长度为1000mm的不锈钢串条
主要直径有7mm/8mm/9mm
主要长度有650mm/800mm/1000mm/1200mm/1400mm等，欢迎根据需求定做，量大从优。

不锈钢串条的使用：
a.用皮带钉扣机将需要联接的两端皮带接头用皮带扣装订
b.将两边皮带扣对接，从一端穿入串条
c.将串条两末端弯曲
不锈钢串条的特点：
采用高强度不锈钢丝特殊缠绕绳心，外包耐磨不锈钢皮，强度大，寿命长。
采用优质原料抗油防锈，耐腐蚀
不锈钢串条成槽性好，防窜动，减少磨损

USE OF STAINLESS STEEL SKEWERS: A. Use the belt nailing machine will need to join the two-end belt connector belt buckles

binding B. Connect the belt buckles on both sides and pass through the Strip C. The two ends of the string will be bent

stainless steel string features: the use of high-strength stainless steel wire special winding rope, wear-resistant

stainless steel skin, high strength, long service life. Using high-quality raw materials anti-oil rust, corrosion-

resistant stainless steel series slot good performance, anti-moving, reduce wear

我们还分纯不锈钢和半不锈钢两种穿条，主要区别是半不锈钢穿条中间是铁芯，但两者外观一样。
不锈钢串条种类很多，一般用铠装不锈钢串条的用户比较多。
天德立不锈钢串条由19根不锈钢丝以特殊的多层缠绕方式编织成软轴，外缠以0.5mm厚抗拉强度650/mm以上，表面为光洁的不锈钢带精制而

成。
该穿销具有抗拉强度大，寿命长的优点，尤其具有减低带扣磨损和抗腐蚀的能力。高强度不锈钢穿销适用于强度<=1250N/mm输送带在各种

工况下的联接。??
俗话说的话，买商品要货比三家，天德立不锈钢串条，欢迎您作比较。
We also pided pure stainless steel and semi-stainless steel two kinds of wear strip, the main difference is semi-

stainless steel wear strip in the middle is iron core, but both look the same. There are many kinds of stainless steel

bar, and there are many customers who use armored stainless steel bar. Tentoku stainless steel strand is made of 19

stainless steel wires woven into a flexible shaft in a special multi layer winding manner, with a 0.5 mm thick tensile

strength of more than 650 mm, the surface of which is made of polished stainless steel tape. The PIN has the advantages

of high tensile strength and long service life, especially the ability to reduce buckle wear and corrosion resistance.

High Strength Stainless, STEEL PIN SUITABLE FOR STRENGTH & LT; = 1250n/mm Conveyor Belt in various working conditions of

the connection. As the saying goes, to buy goods to shop around, Tentoku set stainless steel string, you are welcome to

compare.