【钻铤钢TWZ-3HS无磁管.Φ175*9600】价格_厂家

品牌

太钢

型号

30-360

驱动型式

机械驱动

传动型式

齿轮传动

移运型式

自行式

最大钻井深度

电议m

钻机最大钩载

电议kN

钻杆直径

360mm

外形尺寸

360mm

重量

1520kg

直径

30-350

长度

9600

无磁钻铤TWZ-3HS/SMF166

无磁钻铤介绍.
Non-magnetic Drill Collars

无磁钻链采用自主研发的低破不锈铜，执行API规范及SY/T5144标准，可对螺纹进行冷滚压处理，可加工双台肩螺纹及其它规格的特殊螺纹。
The Non-magnetic drill collars are made from low carbon stainless steel and conform to the requirements of APl Spec.7 and SY/T5144. All threads are phosphated,copperized or cold worked. All Connections are eguipped with pressed steel thread protectors. All threads are machined with CNC Lathes-Double-shouldered and special threads.

无磁钻铤的尺寸规格
Non-magnetic Drill Collars Specification

钻铤编号	外径		内径		长度L	台肩倒角直径	弯曲强度比
钻铤编号	MM	in	mm	in	mm	Df mm	Bend Strength ratio
NC23-31	79.4	3 1/8	31.8	11月4日	9150	76.2	2.57:1
NC26-35	88.9	3 1/2	38.1	11/2	9150	82.9	2.42:1
NC31-41	104.8	41/8	50.8	2	9150或9450	100.4	2.43:1
NC35-47	120.7	43/4	50.8	2	9150或9450	114.7	2.58:1
NC38-50	127.0	5	57.2	21/4	9150或9450	121.0	2.38:1
NC44-60	152.4	6	57.2	21/4	9150或9450	144.5	2.49:1
NC44-60	152.4	6	71.4	2 13/16	9150或9450	144.5	2.84:1
NC44-62	158.8	61/4	57.2	21/4	9150或9450	149.2	2.91:1
NC46-62	158.8	61/4	71.4	213/16	9150或9450	150.0	2.63:1
NC46-65	165.1	61/2	57.2	21/4	9150或9450	154.8	2.76:1
NC46-65	165.1	61/2	71.4	213/16	9150或9450	154.8	3.05:1
NC46-47	171.4	6 3/4	57.2	21/4	915059450	159.5	3.18:1
NC50-67	171.4	63/4	71.4	213/16	9150或9450	159.5	2.37:1
NC50-70	177.8	7	57.2	21/4	9150或9450	164.7	2.54:1
NC50-70	177.8	7	71.4	213/16	9150或9450	164.7	2.73:1
NC50-72	184.2	7 1/4	71.4	213/16	9150或9450	169.5	3.12:1
NC56-77	196.8	73/4	71.4	213/16	9150或9450	185.3	2.70:1
NC56-80	203.2	8	71.4	213/16	9150或9450	190.1	3.02:1
65/8REG	209.6	8 1/4	71.4	213/16	9150或9450	195.7	2.93:1
NC61-90	228.6	9	71.4	213/16	9150或9450	212.7	3.17:1
75/8REG	241.3	9 1/2	76.2	3	9150或9450	223.8	2.81:1
NC70-97	247.6	93/4	76.2	3	9150或9450	232.6	2.57:1
NC70-100	254.0	10	76.2	3	9150或9450	237.3	281:1
85/8REG	279.4	11	76.2	3	9150或9450	266.7	2.84:1

无磁钻铤的主要公差尺寸
Dimensional Tolerances for Non-magnetic Drill Collars
外径范围OD		外径	内径	长度L	台肩倒角直径
mm	in	OD	ID	mm	DF
≤88.9	≤3 1/2	﹢1.2 0
≤88.9-114.3	＜31/2-41-2	﹢1.6 0
＞114.3-139.7	＜41/2-51/2	﹢2.0 0	﹢1.6	152.4	±0.4
＞139.7-165.1	＜51/2-61/2	﹢3.2 0	0
＞165.1-215.9	＜61/2-81/2	﹢4.0 0
＞215.9-241.3	＜81/2-91/2	﹢4.8 0
241.3	＜91/2	﹢6.4 0

无磁钻铤的力学性能
Mechanical Properties
外径范围OD		屈服强度	抗拉强度	伸长率
mm	in	Mpa	MPa	%
88.9-174.6	31/8-63/4	≥758	≥827	≥18
177.8-279.4	7~11	≥689	≥758	≥20

磁性能Magnetic Properties
（磁场=1*105/4μA/m)
1.相对磁导率Ur＜1.010
2.磁场梯度∆B≤0.05μT

无磁加重钻杆
Non-magnetic Heavy Weight Drill Pipe
无磁加重钻杆采用自主研发的低碳不锈钢，执行API规范及SY/T5146标准，可对螺纹进行冷浪王理，可加工双台肩螺纹及其它规格的特殊螺纹，可承接各种非标产品。

The Non-magnetic heavy weight drill pipcs are made from low carbon stainless stcel. to API Spec.7 and SY/T5144. All threads are phosphated, copperized or cold worked Connections are equipped with pressed steel thread protectors. All threads arc machined- CNC Lathes-Doublc-shouldered and special threads.



无磁加重钻杆尺寸规格
Non-magnetic Heavy Weight Drill Pipe Specification
规格	外径	内径	接头Connection			管体Body/加厚部分尺寸Upset Upset
Sizes	mm/in	in	型式Stylc	外径OD	内外螺纹台府倒角mm	中部 Center area mm	端部 End area mm
WCY66-6 5/8FH-I	168.3 65/8	114.3 41/2	65/8FH	209.6 81/4	195.70	184.2	176.21
WCY55-5 1/2FH-1	139.7 51/2	92.1 35/8	51/2FH	177.8 7	170.7	152.4	144.5
WCY50-NC50-1	127. 0 5	76.2 3	NC50	168.3 65/8	154.0	139.7	130.2
WCY45-NC46-1	114 41/2	71.4 213/16	NC46	158.8 61/4	145.3	127.0	117.5
WCY35-NC38-1	88.9 31/2	52.39 21/16	NC38	120.7 43/4	116.3	101.6	92.1
WCY29-NC31-1	73.03 27/8	50.2 2	NC31	104.8 41/8	100.4	84.1	81.0
注：力学性能参见无磁钻铤。
Mechanical properties referring to those of Non-maganetic drill collars

磁性能Magnetic properties
（磁场＝1x105／4πA／m）
(MPS-1*105/4πA/m)
相对磁导率Ur＜1.010
Average:μur<1.010
磁场梯度：ΔB＜0.05μT
Magnetic Field Gradient:AB<0.05UT