phoenix2910110继电器模块
北京艾克伊恩工控技术有限公司
中国 北京
产品属性
图文详情
品牌推荐
品牌
Phoenix/菲尼克斯
型号
PLC-RPT-230UC/21/SO46
结构形式
模块式
安装方式
其他
LD指令处理器
硬PLC
I/O点数
PLC-INTERFACE，控制侧带有干扰电流和干扰电压保护
功能
包括PLC-BPT.../21底座端子，采用插拔式接口和插拔式微型功率触点继电器，
工作电压
1个转换触点，输入电压230 V ACV
输出频率
环境温度（运行） -40 °C ... 55 °CHz
处理速度
保护等级 IP20 继电器底座μs
程序容量
额定输入电压 UN 230 V AC
数据容量
保护电路 桥式整流器
产品认证
UL Listed
环境温度
触点类型 1个转换触点℃
环境湿度
触点材料 AgSnO%
加工定制
非加工定制
智能制造 工业大数据 工业4.0 工业物联网 中国制造2025 智慧工厂 人工智能
北京艾克伊恩工控技术有限公司 只需提供品牌 型号 不设起订
----致力于欧洲德国进口工业配件采购
优势品牌菲尼克斯phoenix 施耐德 schneider 西门子 siemens 倍福 皮尔兹 康茂胜等欢迎询价 V信同号 一三一2亿叁一三柒灵五 球球：2492七七三三一
继电器模块 - PLC-RPT-230UC/21/SO46 - 2910110
PLC-INTERFACE，控制侧带有干扰电流和干扰电压保护，包括PLC-BPT.../21底座端子，采用插拔式接口和插拔式微型功率触点继电器，1个转换触点，输入电压230 V AC
尺寸
| 宽度 | 6.2 mm |
|---|---|
| 高度 | 80 mm |
| 深度 | 94 mm |
环境条件
| 环境温度（运行） | -40 °C ... 55 °C |
|---|---|
| 环境温度（存放/运输） | -40 °C ... 85 °C |
| 保护等级 | IP20 (继电器底座) |
线圈侧
| 额定输入电压 UN | 230 V AC |
|---|---|
| 220 V DC | |
| 以UN为参考的输入电压范围 | 0.78 ... 1.14 |
| UN下的典型输入电流 | 8.8 mA (50 Hz) |
| 10 mA (60 Hz) | |
| 典型响应时间 | 7 ms |
| 典型释放时间 | 20 ms |
| 保护电路 | 桥式整流器 |
| RCZ滤波器 | |
| 状态显示 | LED 黄色 |
| 额定条件下的功耗 | 2.3 W |
触点侧
| 触点类型 | 1个转换触点 |
|---|---|
| 开关触点类型 | 单触点 |
| 触点材料 | AgSnO |
| Z大切换电压 | 250 V AC/DC (当相邻两个模块的相同接线端子间的电压大于250V（L1、L2、L3），必须使用隔板PLC-ATP。 FBST 8-PLC... 或 ...FBST 500...用于等电位桥接) |
| Z小切换电压 | 5 V (100 mA) |
| Z小切换电流 | 10 mA (12V) |
| Z大启动电流 | 10 A (4 s) |
| 限制连续电流 | 6 A |
| Z大额定功率值（电阻负载） | 140 W (24 V DC) |
| 20 W (48 V DC) | |
| 18 W (60 V DC) | |
| 23 W (110 V DC) | |
| 40 W (220 V DC) | |
| 1500 VA (250 V AC) | |
| 开关容量 | 2 A (24 V、DC13时) |
| 0.2 A (110 V、DC13时) | |
| 0.1 A (220 V、DC13时) | |
| 3 A (24 V、AC15时) | |
| 3 A (120 V、AC15时) | |
| 3 A (230 V、AC15时) |
概述
| 测试电压 | 4 kV AC (50 Hz，1分钟，线圈/触点) |
|---|---|
| 操作模式 | 100%工作因数 |
| 阻燃等级，符合UL 94 | V0 (外壳) |
| 机械寿命 | 2x 107 开关次数 |
| 安装位置 | 任意 |
| 组装说明 | 无间距排列 |
连接数据
| 连接名称 | 线圈侧 |
|---|---|
| 连接方式 | 直插式连接 |
| 剥线长度 | 8 mm |
| 硬导线横截面 | 0.14 mm² ... 2.5 mm² |
| 柔性导线横截面 | 0.14 mm² ... 2.5 mm² |
| 0.2 mm² ... 2.5 mm² (单套管) | |
| 2x 0.5 mm² ... 1 mm² (TWIN套管) | |
| 可连接导向横截面 AWG | 26 ... 14 |
| siemens | 3RA1933-3D | Wiring module top for contactor assemblies S2...S2 with 10 mm distance between the contactors Suitable for 3RT1 and 3RT2 |
| siemens | 3RA1933-3E | Wiring module bottom for contactor assemblies S2 with 10 mm distance between the contactors |
| siemens | 3RA1941-1A | Link module Electrical and mechanical for 3RV2.41/3RV2.42 and 3RT2.4. 3RW304/3RW404 AC operation (multi-unit packaging) |
| siemens | 3RA1941-1AA00 | Link module Electrical and mechanical for 3RV2.41/3RV2.42 and 3RT2.4. 3RW304/3RW404 AC operation (inpidual unit packaging) |
| siemens | 3RA1941-1B | Link module Electrical and mechanical for 3RV1.4 and 3RT1.4 DC operation (multi-unit packaging) |
| siemens | 3RA1941-1BA00 | Link module Electrical and mechanical for 3RV1.4 and 3RT1.4 DC operation (inpidual unit packaging) |
| siemens | 3RA1943-3D | Wiring module top for contactor assembly with 10 mm distance between the contactors |
| siemens | 3RA1943-3E | Wiring module bottom for contactor assembly with 10 mm distance between the contactors |
| siemens | 3RA1952-2A | Base plate for mounting of combination of two contactors (2x 3RT1.5) for reversing |
| siemens | 3RA1952-2E | Base plate for mounting of combination of three contactors (2x 3RT1.5, 1x 3RT2.4) for star-delta (wye-delta) start up |
| siemens | 3RA1952-2F | Base plate for mounting of combination of three contactors (3x 3RT1.5) for star-delta (wye-delta) start up |
| siemens | 3RA1953-2A | Set of link rails for reversing contactor assemblies 3RT1.5 Infeed and output side, phase swapping output side |
| siemens | 3RA1953-2B | Set of link rails between delta contactor 3RT1.5 and star (wye) contactor 3RT1.5 phase swapping output side , including neutral bridge |
| siemens | 3RA1953-2M | Set of link rails for reversing contactor assemblies 3RT1.5 Infeed and output side, phase swapping output side , contactor with busbar connection (without box terminal) |
| siemens | 3RA1953-2N | Set of link rails between delta contactor 3RT1.5 and star (wye) contactor 3RT1.5 phase swapping output side , including neutral bridge , contactor with busbar connection (without box terminal) |
| siemens | 3RA1953-3D | Set of link rails for assemblies 3RT1.5 , infeed side, in-phase |
| siemens | 3RA1953-3G | Set of link rails between delta contactor 3RT1.5 and star (wye) contactor 3RT2 (S3) , at output side |
| siemens | 3RA1953-3P | Set of link rails for reversing contactor assemblies 3RT1.5 , infeed side, Phase swapping |
| siemens | 3RA1954-2A | Mechanical interlock for contactor size S6, S10, S12 3RT10, 3RT12, 3RT14 |
| siemens | 3RA1954-2G | connector for YD combination, Module. S6-S6-S3 (2x 3RT1.5, 1x 3RT2.4) |
| siemens | 3RA1954-3A | Mechanical interlocking for 3RT135, 3RT136, 3RT137 |
| siemens | 3RA1962-2A | Base plate for mounting of combination of two contactors (2x 3RT1.6) for reversing |
| siemens | 3RA1962-2E | Base plate for mounting of combination of three contactors (2x 3RT1.6, 1x 3RT1.5) for star-delta (wye-delta) start up |
| siemens | 3RA1962-2F | Base plate for mounting of combination of three contactors (3x 3RT1.6) for star-delta (wye-delta) start up |
| siemens | 3RA1963-2A | Set of link rails for reversing contactor assemblies 3RT1.6 Infeed and output side, phase swapping output side , contactor with busbar connection (without box terminal) |
| siemens | 3RA1963-2B | Set of link rails between delta contactor 3RT1.6 and star (wye) contactor 3RT1.6 phase swapping output side , including neutral bridge , contactor with busbar connection (without box terminal) |
| siemens | 3RA1963-3D | Set of link rails for reversing contactor assemblies 3RT1.6 , infeed side, phase swapping |
| siemens | 3RA1963-3E | Set of link rails between delta contactor 3RT1.6 and star (wye) contactor 3RT1.5 , at output side |
| siemens | 3RA1972-2A | Base plate for mounting of combination of two contactors (2x 3RT1.7) for reversing |
| siemens | 3RA1972-2E | Base plate for mounting of combination of three contactors (2x 3RT1.7, 1x 3RT1.6) for star-delta (wye-delta) start up |
| siemens | 3RA1972-2F | Base plate for mounting of combination of three contactors (3x 3RT1.7) for star-delta (wye-delta) start up |
| siemens | 3RA1973-2A | Set of link rails for reversing contactor assemblies 3RT1.7 Infeed and output side, phase swapping output side , contactor with busbar connection (without box terminal) |
| siemens | 3RA1973-2B | Set of link rails between delta contactor 3RT1.7 and star (wye) contactor 3RT1.7 phase swapping output side , including neutral bridge , contactor with busbar connection (without box terminal) |
| siemens | 3RA1973-3D | Set of link rails for reversing contactor assemblies 3RT1.7 , infeed side, phase swapping |
| siemens | 3RA1973-3E | Set of link rails between delta contactor 3RT1.7 and star (wye) contactor 3RT1.6 , at output side |
| siemens | 3RA2110-0BA15-1AP0 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 230 V AC screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 50 kA 1 NO (contactor) |
| siemens | 3RA2110-0BA15-1BB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BA15-1FB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) with diode (integrated) |
| siemens | 3RA2110-0BD15-1AP0 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 230 V AC screw terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BD15-1BB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC screw terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BD15-1FB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC screw terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) with diode (integrated) |
| siemens | 3RA2110-0BE15-1AP0 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 230 V AC Spring-type terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BE15-1BB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC Spring-type terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BH15-1AP0 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 230 V AC Spring-type terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BH15-1BB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC Spring-type terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
| siemens | 3RA2110-0BS15-1BB4 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.14...0.20 A 24 V DC Spring-type terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) Adapter length 200 mm |
| siemens | 3RA2110-0CA15-1AP0 | Load feeder fuseless, Direct-on-line starting 400 V AC, Size S00 0.18...0.25 A 230 V AC screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO (contactor) |
