Teseq Schaffner 6150 System Multifunction Generator
Teseq Schaffner 6150
Modula 6150-04 Multi-function generator for immunity testing in accordance with the EN/IEC 61000-4-4, 5 and 11 consisting of: Mainframe MFR 6515 with WLAN MHC 6550, SRG 6501, EFT 6501, PQT 6501, 250V/16A single-phase CDN and LAN (TCP/IP) interface, cables, traceable calibration certificate. WinModula software not included. NOTE: Windows Media Center is not a valid operating system.
MFR 6515 Modula mainframe incl. CDN 250V/16A ac/dc, ready to accomplish the full set of SRG 6501, EFT 6501, PQT 6501, with WLAN MHC 6550, basic control software running under WINDOWS 98/ME/2000/XP and LAN (TCP/IP) interface, cables, traceable calibration certificate. WinModula software not included.
SRG 6501 Surge generator according to IEC 61000-4-5. Open-circuit voltage from 200 to 4.4kV. Output impedance 2 or 12 Ohms.
EFT 6501 EFT generator according to IEC 61000-4-4. Open-circuit voltage from 200 to 4.4kV. Output impedance 50 Ohms.
PQT 6501 Power Fail generator according to IEC 61000-4-11 & -29. EUT current up to 16A cont. Phase angle synchronization 0 - 359 degrees in 1 degree steps. (Needs Variac or Step Transformer to operate)
WIN Modula Test and test management software with test program library, automatic test report generation, test sequencer, access manager, etc.
瑞士 Teseq 特测 NSG5004A 电池模拟器 Battery Simulator
Output voltage: 0 to ±30Vdc, stabilized via sensor connections
Current: 12.5A/25A, short-term 3 x I for 100ms
Impedance: 0.01Ω eff.
Regulation response: ≤ 30V/ms
Current limiting: 0.1A to Imax adjustable in 0.1A steps
ISO 7637
TESTQ 特测 NSG5000 Schaffner Surge Generator 浪涌发生器
维修、出售
The compact and modular EMC Test System NSG 5000 offers all the generators necessary for tests with pulsed interference as well as voltage variations as called for by ISO and SAE. The established test specifications for passenger cars together with the new standards for commercial vehicles published by the ISO, SAE, DIN and other bodies are fully covered, as are the many company specific standards from larger vehicle manufacturers. The construction adopted enables trends in the standards and changing market requirements to be followed consistently through the introduction of new developments or upgrades to the generator modules.
This compact mainframe houses the common system components and accommodates all the standard pulse generators such as the Schaffner NSG5001, the Schaffner NSG5003 and the Schaffner NSG5005. A high performance processor controls all the real-time tasks, takes care of system integrity, assures the monitoring of the EUT path and handles communication with the Windows-based user interface. Besides the control unit, the power supply, high voltage unit and control electronics for the EUT are all housed in a package mounted at the rear of the mainframe. This modularity provides the flexibility to adapt to changing requirements. The front of the chassis is available for the insertion of various pulse generators and for the connection and practical handling of test objects. Interrupt-free test sequences comprising all types of pulse at one and the same EUT connector are made possible through the use of a high voltage pulse bus configuration. An electronic switch to connect and disconnect the battery supply is incorporated in the NSG 5000.
In its standard configuration, the equipment is rated for testing objects at up to 30V/25A DC or 48V / 10A DC. The test rig and the power sources are protected by built-in, over-current trip switches. Additional inputs and outputs are located on the rear panel for test execution control purposes and the monitoring of error signals, oscilloscope triggers, gate start/stop commands, etc. Larger systems can be created by installing further generators in an expansion chassis and these generators are instantly recognized by the software and are embodied automatically in the system. Overall control is effected via a PC running under Windows.
