ZRJ-500L真空乳化机
1. 结构形式：有主机1台，油相锅1只，水相锅1只，操作平台1件等组成。主锅，油相锅，水相锅的内胆材质316L，夹套材质304，外套材质304。
2. 主锅有效容量550L，工作量500L，油相锅有效容积250L，水相锅有效容量310。油水锅主要将物料预热，然后进入主锅乳化。
3. 加热方式：电加热，功率主锅12kw，油相锅8kw，水相锅8kw。夹套内可进行油加热或进水加热，如果进油加热必须配一只油罐容积为150L，配一台转油泵，就可以循环加热。
4. 冷却方式：自来水冷却。
5. 乳化方式：均质器与高速切剪刀进行乳化。电机功率7.5kw-2p变频调速。
6. 搅拌方式：框式回流搅拌桨进行搅拌及刮壁，功率3.7kw-4p变频调速。
7. 开盖方式：双杆液压升降，电机功率2.2kw，配有安全自锁装置。
8. 进料方式：真空自吸进料，主要由油相锅和水相锅的物料进入主锅乳化。
9. 出料方式：有三种，1.底部气动出料 2. 电动倒锅出料 3. 正气压出料。
10. 控制方式：所有动作及温度均由触摸屏控制（包括进出料）
11. 外开尺寸：主机长×宽×高，2900×1200×2600mm。工作时上升高度3800mm 包含油水锅整套外形尺寸：长×宽×高 3500×3050×2600mm
ZRJ-500L Cream Vacuum Emulsification Blender
1. Composition: main machine one set, oil tank one unit, water tank one unit, operation platform one set, 316L stainless steel for the inner material of main tank, oil tank, water tank, 304 stainless steel for jacket material and outer material of main tank, oil tank, water tank.
2. Valid volume for main tank: 550L; Working volume: 500L; Valid volume for oil tank: 250L; Valid volume for water tank: 310L; Oil and water tank is used for pre-heating the material, then the material enters the main tank for emulsification blending.
3. Heating method: heating by electricity, power of main tank: 12kw, power of oil and water tank: 8kw, heating medium can be used by oil or water, if heating by oil, it should heat cycling by oil pump and another oil tank (150L).
4. Cooling method: cooling by water
5. Emulsification method: emulsified by mixer and high-speed scissors. Power: 7.5kw-2p frequency converter
6. Blending method: Frame type overflow mixing paddle is mixing the material and scraping the wall
7. Cap open method: lift by hydraulic pressure, motor power: 2.2kw, with safety auto-lock system.
8. Material feeding method: auto-sucking the material under vacuum from oil and water tank into the main tank.
9. Material releasing method: three ways: 1. From the outlet pipe under the main tank by pneumaticity. 2. From turning over the main tank by electricity. 3. by positive air pressure.
10. Control method: Controlled all by touch screen, including the temperature and material feeding and releasing.
11. Outer dimension: main machine: 2900*1200*2600mm; the maximum lifting height: 3800mm; including the oil and water tank dimension: 3500*3050*2600mm.
