-必须根据安装说明安装操作员终端。
-操作员终端是针对在平面上进行固定安装而设计的，安装平面必须
满足以下条件:
●无高度爆炸危险
●无强磁场
●不在阳光直射下
●无突发性的大幅度温度变化
●用于污染度2的环境
●用于类型1和4X (仅限室内使用)外壳的平整表面.不要让液体、金属屑或配线线头进入操作员终端的任何开口处。否则可能会引起火灾或电击事故。操作员终端需满足EMC指令2004/108/EC中第4条的要求。-将操作员终端存储在低于/高于本手册中建议的温度的环境下分别会导致液晶显示屏中的液体凝结或变成各向同性状态。-液晶显示屏中的液体包含- -种强烈的刺激性物质。如果与皮肤接触，应立即用大量清水冲洗。如果与眼睛接触，应使眼睛保持睁开，用大量清水冲洗并进行医治。-供应商对修改、更改或改造的设备不承担任何责任。一只能使用根据供应商的规格制造的零件和附件。一外围设备必须适用于应用程序和具体的位置。
-本手册中的图用于说明目的。由于许多方面随特定的安装而变化,因此供应商对根据这些图实际使用此终端时出现的情况不负责任。.供应商不担保操作员终端适用于您的特定应用程序，也不承担产品设计、安装或操作方面的责任。
-Only qualified personnel can install or operate the operator terminal.
-The operator terminal must be installed according to the installation instructions.
-The operator terminal is designed for fixed installation on the plane, and the installation plane must
The following conditions are met:
● no high explosion hazard
● no strong magnetic field
● not in direct sunlight
● no sudden large temperature change
● for pollution level 2 Environment
● flat surfaces for type 1 and 4x (indoor use only) enclosures Do not allow liquids, metal chips or wiring ends to enter any openings in the operator terminal. Otherwise, fire or electric shock may be caused. The operator terminal shall meet the requirements of Article 4 of EMC directive 2004/108/ec- Storing the operator terminal in an environment below / above the temperature recommended in this manual will cause the liquid in the LCD to condense or become isotropic, respectively- The liquid in the LCD screen contains a strong irritant substance. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, keep eyes open, rinse with plenty of water and treat- The supplier assumes no responsibility for the modified, altered or modified equipment. (I) only parts and accessories manufactured according to the supplier's specifications shall be used. A peripheral must be suitable for the application and the specific location.
-The figures in this manual are for illustrative purposes. Since many aspects vary with the specific installation, the supplier is not responsible for the actual use of this terminal according to these drawings The supplier does not guarantee that the operator terminal is suitable for your specific application, nor does it assume responsibility for product design, installation or operation.
