英国进口MWA工模具钴基焊条MAC HICA E3074|ECoCrFe|独有设计|25-50HRC|热锻模|冲头|剪切工具修复

Typical All Weld Deposit Hardness
典型全焊缝熔敷金属硬度：

25-30 HRC as deposited   (will work harden up to 50 HRC under impact)

25-30 HRC 熔敷状态     （在冲击下会加工硬化至50 HRC）

Sizes Available and Recommended Amperages

尺寸Φ/电流：

Current电流：AC/DC (+)

Related Specification参考标准：AWS E Co Cr Fe-special

Storage储存：Electrodes should be stored in dry conditions. Should the electrodes

become damp, re-dry for one hour at 150°C before use. 焊条应储存在干燥环境中。如果焊条受潮，应在150°C下重新干燥1小时后再使用。