设备用途：
1、洗网：在全自动程序下，将使用过的印花圆（镍）网清洗干净，并可去除细微折痕，光亮如新，达到二次使用标准，并可反复多次使用。
2、退焖头：本机无需药剂，可直接迅速退卸焖头， 网口不变大不变脆，不影响二次使用。
3、洗焖头：对使用过的焖头进行快速批量清洗，每小时可清洗200个（该清洗方式已获国家**）。
Equipment usage:
1. Washing net: Under the fully automatic program, the used printed round (nickel) net is cleaned thoroughly, and fine lines made by folding can be removed.After washing, it looks as bright as new, meets the standard for secondary use, and can be used multiple times.
2. Removing the braising head: This machine does not require any agent and can quickly remove the braising head. The net port remains unchanged in size and fragility, without affecting secondary use.
3. Washing braising head:It can quickly and in batches clean used braising heads, with a cleaning capacity of 200 per hour (this cleaning method has been granted a national patent).
镍网再生超高压洗网机(三网机型）
Nickel mesh regeneration ultra-high pressure washing machine (three mesh model)
设备特点
效率高
纯水清洗，一小时洗网6支以上（用碱水泡过的网翻倍）， 退焖头仅需10秒，洗焖头200个/小时，三网、双网、单网自由切换。
能耗低
总功率25千瓦，实时功率15千瓦左右，平均每支网耗电3度左右， 配件消耗1元/支网，不考虑人工成本，总计5元以内，洗网成本极低。
掌握核心技术，主泵自主生产，故障率低
本机超高压泵全部自主生产，一次保养可正常使用500-1000小时，超过同行业及国际标准。
Equipment features
High efficiency
More than 6 meshes per hour can be washed (the meshes soaked in alkaline water are doubled), the retort head**takes 10 seconds, 200 retort heads can be washed per hour, and the three meshes, double meshes, and single meshes can be switched freely.
Low energy consumption
The total power is 25 kilowatts, the real-time power is about 15 kilowatts, the average power consumption per mesh is about 3 degrees, the accessory consumption is 1 yuan per mesh, without considering the labor cost, the total is within 5 yuan, and the washing cost is extremely low.
Master the core technology, produce the main pump independently, and have a low failure rate
The ultra-high pressure pump of this machine is produced independently, and it can be used
