喷墨打印机
东莞市至上印花机械有限公司
广东省东莞市虎门镇怀德工业区荔园路五号
产品属性
图文详情
品牌推荐
品牌/型号
LC/LC-DYJ900
最大打印幅面
1074mm
最高分辨率
2880×1440dpi
墨盒类型
四色墨盒
类型
普通喷墨打印机
Model name 型号RJ-900CPrinting method 打印方式On-demand piezo drive system 微压电打印方式Drive system 驱动系统Firmware servo/DC motor driveMedia feed system 介质步进器Multipoint pressurization grid roller system 多点增压滚轮系统Media fixing system 介质固定Pressurization roller down system by manual lever 手动向下压杆Printing precision 打印精度360、V360、720、V720、1440、2880 dpiMedia feed/ejection 介质装卸Sheet media 单页纸Front feed/Front ejection 前端装入/前端卸下Roll media 卷筒纸Rear feed/Front ejection 后端装入/前端卸下Media
介 质Tracing paper, Color standard paper, Film, Coated paper, Gloss paper，Heat transfer paper 描图纸，彩喷纸，胶片，涂料纸，高光相纸，热转印纸Outer diameter of the roll media 介质卷筒内径2 inch英寸Under小于 150 mm3 inch英寸Under小于 150 mmMaximum media length
最大介质长度Sheet media 单页纸1600 mmRoll media 卷筒纸50 mMaximum media width 最大介质宽度1080 mmMaximum print length
最大打印长度Sheet media 单页纸1580 mmRoll media 卷筒纸18 mMaximum print width 最大打印宽度1074 mmPrint margin打印留白Sheet media 单页纸Front前: 3 mm, Back后: 17mm, Left左: 3 mm, Right右: 3 mmRoll media 卷筒纸Front前: 3 mm, Back后: 17 mm, Left左: 3 mm, Right右: 3 mmMedia cut system 切纸方式Horizontal auto-cut system水平方向 自动/手动可选Head height adjustment 喷头高度调节Standard/High (2 step adjustment)标准/高（2档调节）Range accuracy 水平精度范围Within ? 0.25 mm or ? 0.1 % of the moving distance
介于?0.25mm 或?0.1%的长度Perpendicularity 垂直精度范围For moving distance (500.0 mm), within ?0.1 mm
每移动500mm，?0.1mmCPU 中央处理器64Bit RISC CPU
64位指令集中央处理器Memory 内存256 MBCommand 指令MH-GL, MH-GL/2, MH-RTL (RTL-PASS)Font字体Vector font (JIS first level, second level, in accordance with 1990 version)
矢量字体（日本标准I，II，兼容1990版本）Interface 端口Network interface (Ethernet IEEE 802.3) 网络端口USB (Corresponding to USB
1.1 and USB
2.0) USB端口（兼容1.1与2.0）Ink 墨水Supply system
供墨系统Tubing supply system from 4 color independent cartridge
4色独立墨盒管道供墨系统Cartridge墨盒Black, Cyan, Magenta, Yellow 黑，青，品红，黄Environmental condition打印环境Operating environment 工作环境Temperature温度: 10 癈 to 35 癈Humidity湿度: 40 to 60%, No condensation无凝结Power 电源Power voltage功率AC 90 V to AC 132 V / AC 198 V to AC 264 VFrequency 频率50Hz/60Hz ?1HzPower consumption
电源功耗Printing 打印状态100 WIdling 先机状态Under 35 WOuter diameter
体积Height 高983 mm (including the stand含支撑架)Width 宽1766 mmDepth 长496 mmWeight 重量Plotter 打印机58.7 kgStand 支撑架18.8 kg墨水使用量(每平方米)8-15毫升每平方米墨水价格:10元左右,纸6元(全覆盖)
介 质Tracing paper, Color standard paper, Film, Coated paper, Gloss paper，Heat transfer paper 描图纸，彩喷纸，胶片，涂料纸，高光相纸，热转印纸Outer diameter of the roll media 介质卷筒内径2 inch英寸Under小于 150 mm3 inch英寸Under小于 150 mmMaximum media length
最大介质长度Sheet media 单页纸1600 mmRoll media 卷筒纸50 mMaximum media width 最大介质宽度1080 mmMaximum print length
最大打印长度Sheet media 单页纸1580 mmRoll media 卷筒纸18 mMaximum print width 最大打印宽度1074 mmPrint margin打印留白Sheet media 单页纸Front前: 3 mm, Back后: 17mm, Left左: 3 mm, Right右: 3 mmRoll media 卷筒纸Front前: 3 mm, Back后: 17 mm, Left左: 3 mm, Right右: 3 mmMedia cut system 切纸方式Horizontal auto-cut system水平方向 自动/手动可选Head height adjustment 喷头高度调节Standard/High (2 step adjustment)标准/高（2档调节）Range accuracy 水平精度范围Within ? 0.25 mm or ? 0.1 % of the moving distance
介于?0.25mm 或?0.1%的长度Perpendicularity 垂直精度范围For moving distance (500.0 mm), within ?0.1 mm
每移动500mm，?0.1mmCPU 中央处理器64Bit RISC CPU
64位指令集中央处理器Memory 内存256 MBCommand 指令MH-GL, MH-GL/2, MH-RTL (RTL-PASS)Font字体Vector font (JIS first level, second level, in accordance with 1990 version)
矢量字体（日本标准I，II，兼容1990版本）Interface 端口Network interface (Ethernet IEEE 802.3) 网络端口USB (Corresponding to USB
1.1 and USB
2.0) USB端口（兼容1.1与2.0）Ink 墨水Supply system
供墨系统Tubing supply system from 4 color independent cartridge
4色独立墨盒管道供墨系统Cartridge墨盒Black, Cyan, Magenta, Yellow 黑，青，品红，黄Environmental condition打印环境Operating environment 工作环境Temperature温度: 10 癈 to 35 癈Humidity湿度: 40 to 60%, No condensation无凝结Power 电源Power voltage功率AC 90 V to AC 132 V / AC 198 V to AC 264 VFrequency 频率50Hz/60Hz ?1HzPower consumption
电源功耗Printing 打印状态100 WIdling 先机状态Under 35 WOuter diameter
体积Height 高983 mm (including the stand含支撑架)Width 宽1766 mmDepth 长496 mmWeight 重量Plotter 打印机58.7 kgStand 支撑架18.8 kg墨水使用量(每平方米)8-15毫升每平方米墨水价格:10元左右,纸6元(全覆盖)
