气压打眼机、打孔机PUNCHING MACHINE用途：适用各种玩具大小型号眼睛、鼻子的安装，利用气动压力将玩具上眼睛压入戒子中来完成钉眼工序；亦适用于乳胶软管类打眼穿孔。特点：1、采用尼龙软胶冲压头，受力均匀，保护眼鼻表面不受挫；
2、脚踏式气动开关，有利操作员更专心对眼鼻的定位；
3、使用气源过滤器，有效过滤压缩机中的水、油等物质，压力大小可调，确保拉力测试；
4、多款打眼、鼻模，5—20mm直径孔模，更换自如；
5、山耐斯脚踏气缸冲头，国际品质，值得信赖。
技术参数：                              规格：1200×600×1200（mm）工作台面高700mm
重量：50kg
工作气压：0～100PSI 0～7000G/㎝
输入气压: 8kg  压力25-30kg
工作效率: 1次/秒,两气缸PUNCHING MACHINEUsage:this machine is aspecializeddevice for making toys and is fit for fixing toy eyes and noses of every size by the pneumatic pressure.  Features:
1 The punching head is covered bylow durometer rubber so that it accepts the forcehomogeneously/equablyand can protect the operator’s face from being injured.
2 Pneumatic pedal switch can make the operator pay more attention to the work.
3 The gas source filter filtrates the water, oil and so on from the compression engine. The pressure can be adjusted. The pulling force tests are safe.
4 Various moulds to choose, and the diameter is 4-12mmTechnology parameter/data:                 Specification: 1200×600×1200（mm）
Weight:50KG
(Working)Air-Pressure:0～100PSI 0～7000G/㎝