【供应河南华西耐材HXPTL高炉、热风炉用各种喷涂料】价格_厂家

供应河南华西耐材HXPTL高炉、热风炉用各种喷涂料

不限

￥

中国郑州

产品属性

图文详情

品牌推荐

品牌/厂家

河南华西

产品名称

高炉热态喷补料

型号

HXPTL

包装规格

吨包

符合标准

ISO9001

质量等级

细度

0.85

产地

河南

用途

高炉维护

体密g/cm3

2.3

耐压MPa

硬化时间≤min

流动值≥mm

200

MgO≥

80%

1.HX高强隔热纤维复合喷射料（公司专利产品）

HX High-strength Compound Insulating Fiber Gunning Mix（Patent Products)

　早在2006年，公司就研发了HX高强隔热纤维复合喷射料（专利号200610017726.1）改善了喷涂料的隔热性能，有效降低了热损失，防止炉壳过热，提高热风温度。使用时配上相应的的化学粘结剂采用高压喷射施工方式，将加工过有强度的球状纤维绒、粘结剂和耐火料一起喷射在被附着的表面上，形成牢固的纤维耐火材料粘结体。这样形成的喷射层具有高强、轻质、隔热、节能等优点。

HX high-strength compound insulating fiber gunning mix are developed on the base of general and dry-type spray coating mixes (Patent No. 200610017726.1), improving insulating performance, lowering thermal loss, preventing shell over-heating, increasing warm air temperature. It is with the processed sphere fiber wool with certain strength, the refractories are gunned on the surface with he high-pressure gunning installation process,forming a strong integrate of fiber and refractory. The gunned layer has advantages of high-strength, light weight, insulation, saved energy, etc..

　　1. Low rebounded elasticity.

　 2. Low thermal conductivity, excellent heat-retaining properties.

3.Helping to reduce heat loss of blast furnace and hot stove and prolong the service life, showing saved cost,sufficient economic and social benefits.

指标Index 牌号Brand		单位 Unit	XWPT-1	XWPT-2
Al2O3		%	42—48	38—45
体积密度 Bulk density	110℃×24h	g/cm3	0.9—1.05	1.2±0.1
抗折强度 ≥ Bending strength	110℃×24h	M.Pa	≥0.5	≥1.5
耐压强度 ≥ Crushing strength	110℃×24h	M.Pa	≥3.0	≥4.8
线变化率 Linear change	1000℃×3h	%	-2.8	-3.0
热导系数350±25℃ Thermal conductivity		W/m.k	0.2—0.3	0.3—0.35
工作温度 Working temperature		℃	1050	1100
使用部位 Application area			热风主管、炉顶 Hot stove main pipe, furnace top	热风主管、围管等 Hot stove main pipe, bustle pipe
备注 Remark			此参数并非华西产品保证值，指标应根据使用环境在合同中临时约定 This specification is just for reference. The real products will be made tailored to operation conditions and customers’ special requirements.

2.HX长寿型高新热态陶瓷喷注料

HX Longevity High-tech Hot Ceramic Gunning Mix

华西长寿型高新热态陶瓷喷注料是由我集团公司专家团队经过潜心研究，在原来喷补料的基础上，研制出的一种新型耐火材料，得到了国内外钢铁企业的认可，远销海外。

HX longevity high-tech hot ceramic gunning mix is developed by the research and test of our technical team based on original gunning mix and won wide recognition from iron & steel plants both at home and abroad.

项目 Item	单位Unit	喷注料-1 Gunning-1	喷注料-2 Gunning-2
Al2O3	%	≥ 60	≥ 58
SiC	%	- -	≥ 10
CaO	%	≤ 4.2	≤ 2.9
体积密度 Bulk density	g/cm3	≤ 2.3	≥ 2.4
耐压强度110℃ Crushing strength	M.Pa	≥ 25	≥ 30
耐压强度1400℃ Crushing strength	M.Pa	≥ 45	≥ 50
线变化率 Linear change	%	1300℃ ± 0.5	1400℃ ± 0.5
使用部位 Application		炉身中上部 Middle and upper part of furnace shaft	炉身下部、炉腰炉腹 Lower part of furnace shaft, belly and bosh
备注 Remark		此参数并非华西产品保证值，指标应根据使用环境在合同中临时约定 This specification is just for reference. The real products will be made tailored to operation conditions and customers’ special requirements.

3.HX管道喷涂料

HX Tube Spray Coating Mix

采用高强轻质耐火材料，添加多种微粉外加剂，运用先进生产工艺，加工制作的适用于高炉、热风炉各种管道的喷涂料。常用于高炉炉顶煤气导出管及下降管、热风主管、围管及烟道内衬等部位。

产品具有耐高温冲刷和高温下低收缩率、低热导率、抗剥落性、对CO气体具有抗腐蚀性等特点，成功解决了强度与隔热的矛盾，达到了增加管道使用寿命的效果。

The products are one kind of spry coating mix, made of high-strength light-weight refracture with various kinds of micro powders as additives and the advance processes,widely used in various of tubes of blast furnace and hot stove, ordinarily used in gas tube and decline tube at the top of blast furnace, main hot-air tube, packing tube and flue, etc..

The product have the advantages of resistance high-temperature wear, low shrinkage rate at high-temperature, low thermal conductivity, spalling resistance, resistance to CO gas corrosion, solving the problem of strength not in line with insulation, resulting in longer service life.

指标Index 牌号Brand		单位 Unit	HXGDP-1 耐冲刷喷涂料（CMG-BF） Spray coating mix resistance to wear	HXGDP-2 轻质喷涂料 Light weight spray coating mix
化学成分 Chem.comp	Al2O3	%	≥45	≥35
体积密度110℃×24h Bulk density		g/cm3	≥1.9	≥1.4
烘干强度110℃×24h Baking strength		M.Pa	≥5	≥3
烧后强度1300℃×3h After burning strength		M.Pa	≥6	≥4
使用部位 Application			高炉上升管、下降管及除尘器内衬 Lifting pipe,down pipe and dust catcher	热风围管、烟道内衬 Hot-air packing tube, flue
备注 Remark			此参数并非华西产品保证值，指标应根据使用环境在合同中临时约定 This specification is just for reference. The real products will be made tailored to operation conditions and customers’ special requirements.

4.HX高炉用各种喷涂料

HX Hot Blast Stove Used Gunning Mix

指标Index 牌号Brand		单位 Unit	GWP-35	GWP-45	GWP-55
化学成分 Chem.comp	Al2O3	%	≥35	≥45	≥55
化学成分 Chem.comp	Fe2O3	%	≥1.5	≥1.5	≥1
体积密度 Bulk density	110℃×24h	g/cm3	≥2.0	≥2.1	≥2.2
耐压强度 Crushing strength	110℃×24h	M.Pa	≥30	≥35	≥35
	1000℃×3h	M.Pa	≥25	≥30	≥30
	热处理温度×3h Heat treatment temperature	M.Pa	≥45 1200℃	≥50 1400℃	≥55 1500℃
线变化率 Linear change	1000℃×3h	%	±0.5	±0.5	±0.5
线变化率 Linear change	热处理温度×3h Heat treatment temperature	%	±1.0 1200℃	±1.0 1400℃	±1.0 1500℃
耐火度 Refractoriness		℃	≥1520℃	≥1640℃	≥1680℃
备注 Remark		此参数并非华西产品保证值，指标应根据使用环境在合同中临时约定 This specification is just for reference. The real products will be made tailored to operation conditions and customers’ special requirements.

5.HX热风炉用各种喷涂料

HX Hot Blast Stove Used Gunning Mix

华西公司结合自身特点，引进日本先进的喷涂技术，所生产的喷涂料具有产品性能稳定，回弹率低、强度大、收缩小、施工性能好等特点。并配有专业施工队伍及施工技术指导，确保材料和施工质量，用户非常满意。

The hot blast stove used gunning mix is developed by combining our own characteristics and Japanese advantage gunning technology. It is with stable performance, low rebounded elasticity, high strength, low shrink, good construction performance and etc..

指标 Index 牌号Brand		单位Unit	喷涂料Gunning Mix
指标 Index 牌号Brand		单位Unit	FL-130	GL-130G	FN-130	FN-140
化学成分Chem.comp	Al2O3	%	≥35	≥40	≥40	≥45
耐火度Refractoriness		℃	- -	- -	≥1540	≥1540
体积密度Bulk density		g/cm3	≥1.4	≥1.4	≥1.7	≥1.95
抗折强度 Bending strength	110℃×24h	M.Pa	≥3	≥3	≥2	≥3
抗折强度 Bending strength	烧后 ×3h After burning	M.Pa	1300℃ ≥0.4	1300℃ ≥0.5	1300℃ ≥4	1400℃ ≥4.5
导热系数 Thermal conductivity	350℃	W/m.k	≤ 0.35	≤0.35	≤0.75	- -
线变化率 Linear change	3h	%	1300℃ ±1.0	1300℃ ±1.0	1300℃ ±1.0	1400℃ ±1.0
特性Characteristics		回弹率低、强度大、收缩小、施工性能好 Low rebounded elasticity, high strength, low shrink, good construction performance
使用部位 Application Area		用于高炉、热风炉的本体内衬，高炉炉喉、炉顶及煤气导出系统、热风炉炉顶、热风管道系统，煤烟、烟囱系统的保护层和炉衬的喷涂施工。 Blast furnace and hot blast stove body lining, furnace throat, furnace top and gas delivery system, hot blast stove top, hot blast pipeline system, protective layer of soft coal and chimney and gunning construction of blast lining.
备注 Remark		此参数并非华西产品保证值，指标应根据使用环境在合同中临时约定。 This specification is just for reference. The real products will be made tailored to operation conditions and customers’ special requirements.

原料辅料、初加工材料 > 非金属材料及制品 > 非金属粉末 >