Input Voltage of CT1 to CT2

36 to 57V

Input Voltage of SP1 to SP2

36 to 57V

Output Voltage

5V (Can ADJ for customer)

Output Power

(Can ADJ for customer)

<3.84W

<6.49W

<12.95W

<17W

Class

0 (Can ADJ for customer)

Ambient Operating Temperature

-20～65ºC

Ambient Storage Temperature

-40ºC～85ºC

Pin #

Name

Description

1

CT1

TX Input (2). This input pin is used in conjunction with VA1 and connects to the centre tap of the transformer connected to pins 3 & 6 of the RJ45 connector (TX) - it is not polarity sensitive.

2

CT2

RX Input (1). This input pin is used in conjunction with VA2 and connects to the centre tap of the transformer connected to pins 1 & 2 of the RJ45 connector (RX) - it is not polarity sensitive.

3

SP1

Direct Input (1). This input pin is used in conjunction with VB2 and connects to pin 4 & 5 of the RJ45 connector.

4

SP2

Direct Input (2). This input pin is used in conjunction with VB1 and connects to pin 7 & 8 of the RJ45 connector.

5

CP1

Class Programming (1).Connect an external resistor to CP2 will change the current class of the module. With no resistor fitted the Ag8000 will default to Class 0.

6

CP2

Class Programming (2).Connect an external resistor to CP1 will change the current class of the module. With no resistor fitted the Ag8000 will default to Class 0.

7

VOUT+

Negative DC Output.This pin provides the regulated output from the DC/DC converter.

8

VOUT+

Positive DC Output.This pin provides the regulated output from the DC/DC converter.

9

ADJ

Output Adjust.The output voltage can be adjusted from is nominal value, by connecting an external resistor from this pin to either the +VDC pin or the -VDC pin.

10

NC

Internal Connection.Do not connect to this pin.