Technical Data Sheet
985UV
Technical Technical Technical Technical Data Data Data Data Sheet Sheet Sheet Sheet Screen Screen Screen Screen Printing Printing Printing Printing inks inks inks inks
The above statements are accurate to our best knowledge and belief. However, due to the great number of possible influences during the
manufacture of the substrate and the variation in the application process we suggest that suitability testing take place under actual conditions
before production. No legally binding guarantee of certain properties or of the suitability for a definite application purpose can be derived from the
above information. 985UV
Series 11 06 2009 - 1
1. 1. 1. 1. APPLICATION APPLICATION APPLICATION APPLICATION FIELDS: FIELDS: FIELDS: FIELDS:
Universal UV screen printing ink for the printing of blow
moulded objects and foils, suitable for substrates made of pre-
treated polyolefines, polyethylene (PE), polypropylene (PP),
PVC and other plastic types as well as for printing on paper and
cardboar d.
Substrates may differ in their chemical structure or method of
manufacture. A test for suitability must always be carried out
before printing. Antistatic, Mould Release Agents and Slip
Additives may have negative effects on adhesion, and should be
detecte d and removed prior to printing.
2. 2. 2. 2. CHARACTERISTICS: CHARACTERISTICS: CHARACTERISTICS: CHARACTERISTICS:
This high gloss UV ink series is very reactive in nature, assuring
good curing and adhesion even when printing at high machine
speeds.
The inks of the 985 UV series are constitutionally free from toxic
elements and solvents. The raw materials used meet with the
limits stipulated by the EEC regulation EN 71 (Safety of toys),
part 3 (Migration of Certain Elements) of December 1994.
The inks of this series may also be used for printing on the
outside of food packaging and will exhibit good solvent and
water resistance after 12 hours.
3. 3. 3. 3. RANGE RANGE RANGE RANGE OFOFOFOF COLOURS: COLOURS: COLOURS: COLOURS:
The basic ink mixing system consists of 12 basic colours and
may be used for the mixing of a wide colour shade range. Field
proven mixing formulations exist for Pantone ® , HKS, RAL, NCS ,
etc. (see 6.2).
3.1 3.1 3.1 3.1 Basic Basic Basic Basic Colours: Colours: Colours: Colours:
Light Yellow G 1* 985 UV 2251
Medium Yellow G 2 985 UV 2252
Orange G 3* 985 UV 3443
Light Red G 4* 985 UV 3444
Red G 5* 985 UV 3445
Pink G 6 985 UV 3446
Violet G 7 985 UV 5487
Blue G 8 985 UV 5488
Green G 91 985 UV 6714
Brown G 10 985 UV 8200
White G 11 985 UV 1071
Black G 12 985 UV 9072
Clear Base 985 UV 0007
* The above colours are also available in extremely light-
fast versions having a value of > 7 on the blue wool scale (1-8).
1. 应用范围：
通用型 UV 丝印油墨，用于包装工业中吹塑材料和箔的印
刷，适用于预处理过的聚乙烯（ PE ）和聚丙烯（ PP ）， PVC
和其他塑料，以及纸张和卡板纸印刷。
基材通常由化学结构或生产方式决定。在印刷前必须测试其
适用性。抗静电剂，脱模剂和流平剂可能对附着力产生负面
效果，应在印刷前检测并去除。
2. 特性：
这款高光 UV 油墨体系在自然条件下反应活性好，保证了高
速印刷下的固化和附着力。
985UV 系列油墨结构上不含有害物质和溶剂。所用原材料均
符合 1994 年 12 月颁布的 EEC 法规 EN 71 （玩具安全），第
三部分（特定元素的迁移）。
本油墨系列同样可以用在食品外包装，并且在 12 小时后具
有良好的耐溶剂性和耐水性。
3. 颜色的范围：
本油墨包含 12 种基准色，可以调出广泛色系。我们有
PANTONE ， HKS ， RAL ， NCS 等色系所规定的混合色系配方。
（详见 6.2 ）
3.1 基准色
淡黄色 G 1* 985 UV 2251
黄色 G 2 985 UV 2252
橙色 G 3* 985 UV 3443
淡红色 G 4* 985 UV 3444
红色 G 5* 985 UV 3445
粉红色 G 6 985 UV 3446
紫色 G 7 985 UV 5487
蓝色 G 8 985 UV 5488
绿色 G 91 985 UV 6714
棕色 G 10 985 UV 8200
白色 G 11 985 UV 1071
黑色 G 12 985 UV 9072
透明基质 985 UV 0007
上述颜色同样有耐紫外线性能超过 7 的产品。Technical Data Sheet
985UV
Technical Technical Technical Technical Data Data Data Data Sheet Sheet Sheet Sheet Screen Screen Screen Screen Printing Printing Printing Printing inks inks inks inks
The above statements are accurate to our best knowledge and belief. However, due to the great number of possible influences during the
manufacture of the substrate and the variation in the application process we suggest that suitability testing take place under actual conditions
before production. No legally binding guarantee of certain properties or of the suitability for a definite application purpose can be derived from the
above information. 985UV
Series 11 06 2009 - 1
3.2 3.2 3.2 3.2 Special Special Special Special Products: Products: Products: Products:
3.2.1 3.2.1 3.2.1 3.2.1 Light-fast Light-fast Light-fast Light-fast Formulations: Formulations: Formulations: Formulations:
Light Yellow G 25 985 UV 2513
Orange G 31 985 UV 3999
Light Red G 41 985 UV 30001
Red G 51 985 UV 30000
3.2.2 High Opacity Formulations:
White (high opacity) 985 UV 1125
Black (high opacity) 985 UV 9157
3.3 3.3 3.3 3.3 Euro-Colours Euro-Colours Euro-Colours Euro-Colours / / / / 4-Colour 4-Colour 4-Colour 4-Colour Process Process Process Process Printing Printing Printing Printing Inks: Inks: Inks: Inks:
For 4-colour process printing according to DIN 16538,
4 Euro-basic colours are available:
Euro-Yellow 985 UV 2271
Euro-Magenta 985 UV 3501
Euro-Cyan 985 UV 5416
Halftone Black 985 UV 9140
For additives see "Additional Products"
3.4 3.4 3.4 3.4 Bronze Bronze Bronze Bronze Colours: Colours: Colours: Colours:
see separate "Bronze Colours" leaflet
4. 4. 4. 4. ADDITIONAL ADDITIONAL ADDITIONAL ADDITIONAL PRODUCTS: PRODUCTS: PRODUCTS: PRODUCTS:
Printing Lacquer 985 UV 0054
Transparent Paste (max. addition: 10 %) 985 UV 0124
Raster Paste (max. addition: 10 %) 985 UV 0012
5. 5. 5. 5. ADDITIVES: ADDITIVES: ADDITIVES: ADDITIVES:
5.1 5.1 5.1 5.1 Thinner: Thinner: Thinner: Thinner:
The inks of the 985 UV series are ready to use. If further
viscosity reduction is desired, UV thinner may be added. In
order to increase curing, the addition of reactive thinner is
recommended.
In general, no solvent-based thinners should be used due
to flammable nature of the solvents.
UV Thinner (max. addition: 2-5 %) 985 UV 0014
Reactive Thinner (max. addition: 2-5 %) 985 UV 0010
5.2 5.2 5.2 5.2 Adhesion Adhesion Adhesion Adhesion Modifier: Modifier: Modifier: Modifier:
In the case of particularly high resistance requirements, the
addition of adhesion modifier is recommended. However
the addition of adhesion modifier to UV curable ink will lead
to a processing time (potlife) of 4-8 hours at 21 ° C
depending on the colour s hade. Higher processing
temperatures will result in a shorter potlife.
3.2 特种产品：
3.2.1 耐光照产品：
淡黄色 G 25 985 UV 2513
橙色 G 31 985 UV 3999
淡红色 G 41 985 UV 30001
红色 G 51 985 UV 30000
3.2.2 : 高遮盖力产品：
白色 ( 高遮盖 ) 985 UV 1125
黑色 ( 高遮盖 ) 985 UV 9157
3.4 欧系颜色 / 4 色印刷油墨：
根据 DIN 16538 规定的 4 色印刷工艺，我们可以提供 4 种欧
洲基准色系：
欧系黄 985 UV 2271
欧系品红 985 UV 3501
欧系青色 985 UV 5416
中间色黑 985 UV 9140
添加物请见 “ 增加的产品 ”
3.4 金属颜色：
见另外的 “ 金属颜色 ” 技术资料。
4. 增加的产品：
当使用 4 色中间色调工艺时，可用透明膏（ UV 光下反应）来
减少颜色密度。可添加光栅剂减少 “ 点模糊 ” ，得到分辨率
更高的点。
印刷光油 985 UV 0054
透明胶液 ( 最多添加 : 10 %) 985 UV 0124
光栅胶液 ( 最多添加 : 10 %) 985 UV 0012
5. 添加剂：
5.1 稀释剂
985UV 系列油墨是即开即用型。如果需要进一步降低粘度，
可使用 UV 稀释剂。为增加固化，推荐使用反应型稀释剂。
总体来说，由于溶剂的易燃性，应使用不含溶剂的稀释剂。
UV 稀释剂 ( 最多添加 : 2-5 %) 985 UV 0014
活性稀释剂 ( 最多添加 : 2-5 %) 985 UV 0010
5.2 附着力促进剂
如果需要特别高的耐受性要求，推荐使用附着力促进剂。然
而，在 UV 固化油墨中添加附着力促进剂，将导致 21 度下的
施工期约为 4-8 小时，根据颜色的不同而不同。高施工温度
将导致短施工期。Technical Data Sheet
985UV
Technical Technical Technical Technical Data Data Data Data Sheet Sheet Sheet Sheet Screen Screen Screen Screen Printing Printing Printing Printing inks inks inks inks
The above statements are accurate to our best knowledge and belief. However, due to the great number of possible influences during the
manufacture of the substrate and the variation in the application process we suggest that suitability testing take place under actual conditions
before production. No legally binding guarantee of certain properties or of the suitability for a definite application purpose can be derived from the
above information. 985UV
Series 11 06 2009 - 1
Overprinting must take place within 12 hours at 21 ° C in case an
adhesion modifier is added.
Adhesion Modifier (max. add.: 2 %) HV 100 VR 1259
5.3 5.3 5.3 5.3 Levelling Levelling Levelling Levelling Agent: Agent: Agent: Agent:
The levelling of the ink surface can be optimised by the use of
levelling agent.
Levelling Agent (max. add.: 0.5-1 %) VM 100 VR 1297
6. 6. 6. 6. PROCESSING PROCESSING PROCESSING PROCESSING INSTRUCTIONS: INSTRUCTIONS: INSTRUCTIONS: INSTRUCTIONS:
6.1 6.1 6.1 6.1 Pre-treatment: Pre-treatment: Pre-treatment: Pre-treatment:
Pre-treatment of polyolefines (PE/PP) must be performed by
Flame Treatment or CORONA-discharge in order to insure the
adhesion of the UV screen printing ink to the substrate. In case of
PE, surface tension needs to be at least 42 mN/m (Dynes/cm), in
case of PP at least 52 mN/m (Dynes/cm).
6.2 6.2 6.2 6.2 Stencils Stencils Stencils Stencils / / / / Printing Printing Printing Printing Equipment: Equipment: Equipment: Equipment:
Screen printing meshes between 140-34 threads/cm and 200-34
threads/cm are suitable for printing with UV inks.
The colour mixing formulations are based on a 165-34
threads/cm mesh. However, test prints and approval of the colour
are generally recommended for the respective print jobs. The
985 UV series can be used with all screen printing machines with
screen printing stencils currently used for industrial applications.
Any acrylic acid ester resistant squeegee material may be used.
6.3 6.3 6.3 6.3 Curing Curing Curing Curing Conditions: Conditions: Conditions: Conditions:
The varying UV absorption of the inpidual colours results in a
range of curing properties depending on colour and
opacity. All colours of the 9 85 UV series can be cured by the use
of medium pressure mercury vapour lamps (at least 160 W/cm).
The optimum energy output is 250 - 300 Millijoule/cm 2 . UV
curing is followed by a 12 hour post-cure phase after which the
ink film is fully cured and has its final properties.
However, it must be noted, that low radiation intensity, excessive
machine speeds or excessive film thickness can have a negative
influence on the curing properties and adhesion.
Un-cured prints are considered a hazardous waste. Therefore, it is
recommended to cure misprints under the UV lamp as a matter of
principle. After curing, spoilage can be disposed by conventional
methods and may be incinerated without causing any difficul ties.
如果添加附着力促进剂时， 21 度下必须在 12 小时内重复印
刷。
附着力促进剂 ( 最多添加 : 2 %) HV 100 VR 1259
5.3 流平剂
油墨表面的流平性可以用流平剂来优化。
流平剂 ( 最多添加 : 0.5-1 %) VM 100 VR 1297
6. 工艺要求
6.1 预处理
必须使用火焰处理或电晕处理进行聚烯烃（ PE/PP ）的预处
理，以保证移印油墨对基材的附着力。对 PE 而言，表面张
力至少达到 42 mN/m （达因 / 厘米），对 PP 而言，至少达到
52 mN/m （达因 / 厘米）。
6.2 印版 / 印刷设备
丝网目数介于 140-34 线 / 厘米和 200-34 线 / 厘米适用于 UV
印刷油墨。混色配方基于目数为 165-34 线 / 厘米。然而，通
常推荐对不同的印刷工作须做印刷试验和颜色确认。 985UV
系列可用于目前工业应用中使用的印版和所有的丝印机器。
可以使用任何类型的耐丙烯酸酯的刮板材料。
6.3 固化条件
各种颜色对 UV 吸收的不同，导致了由颜色和遮盖力决定的
固化特性。 985UV 系列所有的颜色可以使用中等压力的汞蒸
汽灯（ 160W/ 厘米）固化。最佳能量输出为 250-300 毫焦耳 /
平方厘米。 UV 固化完成后，应该有 12 小时的养成期，以使
油墨完全固化，并达到最终特性。
然而，必须注意，低辐射强度，过快的机器速度或过厚的油
墨会导致固化特性和附着力的负面效果。
未固化的油墨是有毒废料。因此，作为基本操作，推荐将错
印的油墨用 UV 灯固化。固化后，废品可以用传统方式处
理，焚化后不会引起任何问题。Technical Data Sheet
985UV
Technical Technical Technical Technical Data Data Data Data Sheet Sheet Sheet Sheet Screen Screen Screen Screen Printing Printing Printing Printing inks inks inks inks
The above statements are accurate to our best knowledge and belief. However, due to the great number of possible influences during the
manufacture of the substrate and the variation in the application process we suggest that suitability testing take place under actual conditions
before production. No legally binding guarantee of certain properties or of the suitability for a definite application purpose can be derived from the
above information. 985UV
Series 11 06 2009 - 1
7. 7. 7. 7. CLEANING: CLEANING: CLEANING: CLEANING:
Screens and squeegees as well as other working materials can be
cleaned with the RUCO screen cleaner 32 335. If cleaning is not
performed by fully automatic cleaning equipment, protective
gloves must be worn. Cleaning liquids that are contaminated with
UV products should not be used for the washing of working
materials that were used with conventional screen printing inks.
Solvents that contain UV residue are not suitable for reclamation
and must be treated as a separate waste.
Universal Cleaner UR 32 335
Cleaner for cleaning equipment WR 100 VR 1240C
Bio degradable Cleaner BR 100 VR 1272
8. 8. 8. 8. SHELF SHELF SHELF SHELF LIFE: LIFE: LIFE: LIFE:
A shelf life of 12 months is guaranteed when storing the inks at
21 ° C and in the original packing container. At higher storage
temperatures the shelf life will be reduced.
9. 9. 9. 9. PRECAUTIONS: PRECAUTIONS: PRECAUTIONS: PRECAUTIONS:
UV inks may cause irritations and can increase the sensitivity of
the skin, possibly leading to hypersensitivity. Therefore, the use
of disposable gloves and protective goggles is strongly
recommended.
For further information on the safety, storage and environmental
aspects concerning these products, please refer to the Material
Safety Data Sheet (MSDS).
7. 清洁
可以使用迪高丝印清洁剂 32 335 清洁丝网，刮板与其他工
作材料。如果不能用全自动清洁设备清洁，必须戴上保护手
套。不能使用受 UV 产品污染的清洁剂来清洗使用传统丝印
油墨的工作材质。不能使用残留 UV 的溶剂再清洁，并将其
作为废料分开处理。
多功能清洗液 UR 32 335
设备清洗液 WR 100 VR 1240C
生物降解清洁剂 BR 100 VR 1272
8. 储存期
在 21 度并在原包装内保存油墨时，可担保 12 个月的储存
期。温度升高时储存期缩短。
9. 注意事项
UV 油墨会导致发炎，会增加皮肤的敏感度，很可能导致过
敏。因此，强烈推荐使用一次性手套和护目镜。
针对这些产品的安全性，储存性和环境问题，请参考材料安
全说明书（ MSDS ）。