Dimensions and Tolerances
A[Net Web width] | 30 - 460 | mm | |
B [Antenna width] | max.460 | mm | |
C [Antenna length] | 0 - 500 (± 0,1) | mm | |
100 - 176 (± 0,2) | mm | ||
D [Antenna gap in MD] | min. 4 | mm | |
E [Antenna gap in CD] | min. 2 | mm | |
F [Antenna gap from edge] | min. 1 | mm | |
G[Minimum line width at IC, attachment area] | min. 180 | µm | |
H [Minimum line width elsewhere] | 30Al | min.450(line length 0-10mm) | µm |
min.500(line length >10mm) | µm | ||
9Al, | min.350 (line length 0-10mm) | µm | |
min.400(line length >10mm) | µm | ||
I [Minimum gap at IC, attachment area] | min. 160 | µm | |
J [Minimum gap elsewhere] | min.200(line length 0-10mm) | µm | |
min.200(line length >10mm) | µm | ||
K* [MD pitch tolerance] | ± 200 | µm | |
L [CD pitch] | varies | mm | |
M,N [Line thickness tolerances, measured from cross] | 250 (± 50) | µm | |
Antenna centering on web | ± 300 | µm | |
*Contact Zhejiang Suntec Electronics Co,.Ltd for available MD-pitch values | |||
Materials
Laminate | AL | High purity aluminium alloy. Foil grade with modest oxide growth tendency. | |
PET | Heat stabilized 50µm PET film. | ||
Crossover | N/A |
| |
Regulations | Suntec complies to 2002/95/EC with the amendments in 2005/618/EC:The restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). | ||
Quality Assurance
Reliablity | To be tested in inlay format by customer |
Yield | Typically >98% (Depends on customer design) |
Operating Environment
Temperature | -40…+85°C |
Chemicals | Kept away from alkaline or acidic chemicals |
Humidity | 40% - 80% |
Delivery Options& Restrictions
Standard core sizes Ø | 76mm |
Maximum roll Ø | 600mm |
Wind direction: Conductor or film side out | |
Storage and Handling
RFID antenna rolls should be handled with care. Be aware of sharp edges. Use appropriate machinery and safety equipment when handling the rolls. Do not wind the rolls too tight. All roll operating machinery should be grounded. Antistatic materials should be used in contact with web. Use electro static discharge systems. The RFID antenna rolls should be stored under the following conditions: temperature -40...+85 °C (-40...+185 °F), humidity 40 - 80 % RH. The recommended shelf life of a RFID antenna roll is 12 months.
Recycling
The RFID antennas should be disposed of in accordance with local authority
requirements.Recycling of aluminium is recommended. The material can be disposed as
landfill or by combustion (> 900 °C / 1652 °F).
Disclaimer
RFID tag manufacturers are advised to conduct their own independent research into inpidual antennas before making a purchase decision. The antennas should be tested thoroughly under the end-use conditions by the customer. The technical values in this data sheet are subject to change without prior notice. Please contact Suntec for the latest version of this document. All values in this document are a result of testing and experience. The information is believed to be accurate, but it is given without acceptance of liability for loss or damage.
