 | FA507型细纱机 |
 | 主要特征 MAIN
FEATURES |
| 牵伸装置
DRAFT 牵伸装置采用螺旋弹簧加压的摇架，压力稳定可靠，操作方便，定期供油。 The whole system of draft gerring inside the cover is of strong construction with the assurance of correct transmission,and oiling to be periodic. 车头传动 HEADSTOCK GEARING 采用同步齿形带传动，有效的降低噪音。改变纱线支数、捻度及牵伸倍数的变换齿轮数，应用优化设计，且能互换使用，便于管理。传动系统采用中央润滑方法，定期供油。车尾面板上集中了所有电器操作原件，便于操作，同时能显示运转状况下的锭速，输出速度及捻度。 The use of a timing belt at the inpoutend of the driving shaft makes possible alow noiselevel.The tooth-figure of the Change gears for matching different amount twists and draft Ratios are of optimized design so that the change gears are Interchangeable and management.The application of A centrallu brication system to the transmission parts enables Oiling to be periodic.The control panel of the machine and contains the manipulation elecments for all the electric devices,having the convenience of manual operation to display the spindle speed outlet speed and twist. | |
| 自动化程度高 HIGH AUTOMATION 1.纺纱过程中，任何时候关车，能自动适应停车。 Whenever the frame is required to stop during spinning the frame can stop automatically at a proper position. 2.如需提前落纱，能使钢领板自动下降及适应停车。 If doffer is required in advance.the ring rails will automatically wind down and stop at a proper position. 3.满管后，钢领板自动下降及自动适应停车。 For full bobbins,the ring rails will down to starting position automatically. 4.开车前能使钢领板自动复位。 While starting the machine,the ring rails will reset themselves at starting position automatically. 5.落纱前能自动接通落纱电源。 Before the doffing,the doffer electric source can be connected cutomatically. 6.开车后低速自动切换高速。 After start of machine,the speed is changed from low to high automatically. | |
 | |
 | 主要规格与技术参数： 锭数：504；492；480；456；420；408；396；384；96 锭距(mm)：70 锭速(rpm)：10000～17000 钢领直径(mm):38;42;45 筒管长度(mm)：180；190；205；230 适纺号数(tex)：6～96 牵伸倍数：10～50 牵伸型式：三罗拉，双皮圈，摇架加压 罗拉直径(mm)：前、中、后均25 粗纱卷装(mm)：吊锭Φ135×320 (max)Φ152×406 粗纱架：托锭支承或单层四、六列吊锭支承 电动机： 主电动机 380伏，15千瓦(456锭及以下) 380伏，17千瓦(456锭以上) 吸风电动机 380伏，1.5千瓦(420锭及以下) 380伏，2.2千瓦(420锭以上) 钢领板升降电动机：380伏，180瓦 全机长度(mm):L=1890+(N/2-1)×70,(N-锭数) 全机宽度(mm):1000 全机高度(mm):2050 MAIN SPECIFICATIONS AND TECHNICAL DATA: No.of spindles: 504；492；480；456；420；408；396；384；96 Spindles guage:70mm Spindles speed: 10000～17000rpm Ring dia: 38;42;45mm Tube length: 180；190；205；230mm Counts:6～96 tex Draft:10～50 Draft system:3-roller,double apron,pendulum weighting arm Roving package:front,middle,back all 25mm Roving package: Φ135×320 suspension bobbin(max)Φ152×406mm Creel:roving bobbins rested on the holders or single tier. 4.6 row with suspension bobbins Motors: Main motor:380V,15Kw(for spindle no.≤456) 380V,17Kw(for spindle no.>456) 80V,1.5Kw(for spindle no.≤420) 380V,2.2Kw(for spindle no.>420) Ring rail lifting motor:380V,180W Machine length:L=1890+(N/2-1)×70mm(N:No.of spindles) Machine width:1000mm Machine height:2050mm |
