红外线延长器 1接收头1发射头，车用C101
C101型， DC12V适用于延长汽车里的播放机.
红外线延长器可增强摆设在车里/ 隐藏里影音播放器其遥控红外线.
可增强遥控红外线信号的家电如下； IPTV， CD/ VCD/ DVD/ Blu-Ray等影音播放器。机顶盒，录影机，拨闭路电视， 卡啦OK，汽车影音设备（DVB，车载音响,多碟机）
包装
1. 红外线接收头分 DC3.5mm 1m 长， 分发射头 3m
2. DC12V - DC3.5 mm 电源线长 2m
组装
1. 把将要延长遥控红外线播放器的表层抹干净。 将发射头贴在播放器面板的红外接收头位置。
2. 将接收头摆在面对遥控的方向。
3. 接收头 开始待机。
4. 安装完成
联系人：李小姐
电话：86-0755-29020936,18028798403
电子邮箱：yeahzs@yeahzs.com
IR Repeater/ IR Extender for Car with 1 Receiver & 1 Emitter ( 1 AV Device ) C101
C101 is designed to be used in the car to extend IR ( InfraRed ) signal up to 1 AV Device .
Remote Control IR Extender/ IR Repeater can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, etc. It is also recommended for Players/ Equipments which are concealed in the car boot.
Operating at 34KHz ~ 60KHz, This IR Repeater is the smallest yet powerful IR repeater with high speed transmission without delay
PACKAGES:
1. DC 12V cablelLength 1m
Our D series is powered by DC12V
2. IR Receiver to DC3.5mm Female Length 0.7m, IR Receiver to IR Emitter Length 3m
INSTALLATION :
1. Clean the surface of your AV equipment. Stick the IR Emitter on the IR point of your AV Equipment
2. Place the IR Receiver such a way that it is facing your remote control. It is advisable to place away from Plasma or CCFL screen as it may affect the remote control signal.
3.Power up & all is ready to go.
TECHNICAL SPECIFICATION :
Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance : 10-20 cm
Power Consumption : < 30mA
Dimension for Receiver & Emitter : 31 (L)×17 (W)×13 (H) mm, 13 (L)×8 (W)×5.5 (H) mm
Input AC 100-240V/ Output DC 12V
FREQUENTLY ASKED QUESTIONS :
1. How to locate the IR Point of the AV Equipment?
A. Set up as per the installation procedures without step one. With the help of an assistant controlling the AV equipment Remote Control, move the IR Emitter around on the window of AV equipment until signal sent is received.
2. Remote Control not working after installation ?
A. Check the power status of your AV equipment
B. Check the connection of USB to AV Equipment/ Power adaptor
C. Ensure that remote control is facing the IR receiver ( Flashes red when signal is sending )
D. Check the position of IR Emitter.
E. Place IR Receiver away from Plasma or CCFL screen as it may affect the remote control signal.
F. Contact your dealer if situation does not improve after the above alteration.
Email :phi_lim@yeahzs.com
Skype : YZCSingapore
Contact : Mr. Philip Lim
