红外线延长器 1接收头1发射头。 （不带电源）U101A
U101A 型适于延长家电或播放机的遥控红外线信号。 此型不带电源， 可将延长器电线之USB5V 接入播放机取得DC5V电源。
红外线延长器可增强摆设在客厅柜子/ 隐藏里影音播放器其遥控红外线.
可增强遥控红外线信号的家电如下； IPTV， CD/ VCD/ DVD/ Blu-Ray等影音播放器。机顶盒，录影机，拨闭路电视， 卡啦OK，汽车影音设备（DVB，车载音响,多碟机）
公共场所酒店.旅馆.洗浴中心或家庭的机顶盒隐藏式安装，等具备红外遥控设备的信号远距离延伸, 实现远距离红外控制!达到设备资源共享的目的特点。
特点
● 红外遥控信号灵敏；遥控信号接收反应速度快实时转发没有延迟。
● 接收机抗荧光灯干扰；本品接收机可以在大多的荧光灯环境下使用，抗干扰能力强。
● 接收机带状态提示灯；接收机通电状态是绿色，红灯闪动时，表示已接收到你的遥控信号，并传送出信号给发射器。
● 发射器是进口芯片定向发射，如果多台影音家电摆放在一起时，也不会影响其它家电遥控信号接收。
● 体积小 ：小巧的接收机/发射器/，易于隐藏。
● 低功耗 ：功率小于0.3瓦。
● 传送距离远， 普通纯铜线传送100米
包装
1. USB线分红外线接收头和发射头
规格长度
组装
1. 把将要延长遥控红外线播放器的表层抹干净。 将发射头贴在播放器面板的红外接收头位置。
2. 将接收头摆在面对遥控的方向。
3. 把USB 接入机子USB接口或USB5V 电源。
4. 接收头 开始待机。
5. 安装完成
联系人：李小姐
电话：86-0755-29020936,18028798403
电子邮箱：yeahzs@yeahzs.com
Details:
Remote Control IR Repeater/ IR Extender with 1 Receiver & 1 Emitter ( for 1 AV Device ) U101A
This unit U101A can be used to extend IR ( InfraRed ) signal up to 1 Device. Power can be drawn from USB DC adaptor or from equipment USB port.
Remote Control IR Repeater/ Extender can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Set up box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet.
Operating at 34KHz ~ 60KHz, This IR Repeater is the smallest yet powerful IR repeater with high speed transmission without delay.
Series available as follow :
U Series powered by USB 5V and D series powered by DC12V
U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments )
U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments )
U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments )
U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc – USB 5V Adaptor Included
U101, U101A, U102, U102A, U104, U104A etc – USB Power Adaptor not included
PACKAGES :
1. USB Cable splits to 1 IR Emitter length 0.5m and IR Receiver length 2m
INSTALLATION :
1. Clean the surface of your AV equipment. Stick the IR Emitter on the IR point of your AV Equipment. Joint the Male & Female of DC3.5mm.
2. Place the IR Receiver such a way that it is facing your remote control. It is advisable to place away from Plasma or CCFL screen as it may affect the remote control signal.
3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power
4. Power up & all is ready to go.
TECHNICAL SPECIFICATION :
Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance : 10-20 cm
Power Consumption : < 30mA
Dimension for Receiver & Emitter : 31 (L)×17 (W)×13 (H) mm, 13 (L)×8 (W)×5.5 (H) mm
Input AC 100-240V/ Output DC 5V : USB 5V 500mA
