AP-920B
产品参数
输入： 100-240V AC， 50/60Hz 100mA ；
输出：AA 1.2VDC 1200mA MAX， AAA 1.2V DC 600mA MAX；
空载功耗： 1W MAX；
满载功耗：5W MAX；
电池充饱率： ≥80%；
环境条件
使用环境： 温度： 0-35 ℃ 湿度： ≤95％
存储环境： 温度: -25～+60℃ 湿度： ≤85％
工作时本体温度：充电时壳体表面温度≤60℃，电池表面温度≤60℃。
安全规格
符合安全标准：CE
尺寸：115*66*31mm (长*宽*高)
重量：100g (不包含电池)
产品特点
1. 本充电器可充4个AA/AAA镍氢或镍镉可充电池，LCD显示充电全过程，直观大方；；
2. 微电脑芯片控制充电过程，通过-ΔV智能技术切断快速充电模式，并自动转换成涓流充电模式，确保电池完全充饱电而不会过充和使用安全；
3. 过流保护，恒电流充电模式将防止电流波动对电池性能的影响和确保使用安全；
4. 计时器严格控制最长充电时间，保证电池充饱(电池充饱率≥80%)的同时，确保使用安全；
5. 温度保护：(≥60℃时启动)充电时电池或充电器温度过高时自动停止充电，确保使用安全；
6. 自动识别功能，通过IC微电脑判别不可充电池，短路电池和有缺陷的可充电池，届时充电器不会充电，确保使用安全；
7. 短路保护，有防止电池正负极片短路保护功能；
8. 电池修复功能.如果电池电压过低(0-0.9V),充电器可以自行修复电池；
9. 全电压输入，全球适用。
- Product features
a) Can charge 4 pcs AA/AAA Ni-Mh / Ni-CD rechargeable batteries. LCD shows total process of charging. With nice appearance.
b) puter IC controls charging process: -ΔVintelligence technique fast cuts off charging, and changes into trickle current charging automatically. Make sure the battery is fully charged and won’t over charge.
c) Over current protection: constant current could avoid bad effect caused by rebounding current and make sure safety.
d) Timer controls strictly the longest time of charging. Make sure safety as battery is fully charged (ratio of chargingsufficiency of one battery≥80%)
e) Temperature protection: (open if ≥60℃) stop charging automatically if the temperature of charger or battery gets too high when charging.
f) Can identify automatically: through puter IC to distinquish non-rechargeable battery, short-circuit battery and deficient rechargeable battery, and then does not charge these batteries to make sure safety.
g) Short circuit protect: can prevent from short circuit when positive pole connects negative one.
h) Can refresh battery: if the voltage of battery is too low (0-0.9V), the charger can refresh battery itself.
i) Worldwide voltage, suitable for the whole world.
3. Electric parameter
1、Input：100-240V AC,50/60HZ 5W MAX；
2、Output：AA×11.2V DC 1600mA MAX，AAA×11.2V DC 800mA MAX；
AA×21.2V DC 800mA MAX，AAA×11.2V DC 400mA MAX；
AA×41.2V DC 400mA MAX，AAA×41.2V DC 200mA MAX；
3、Consume when unloading battery：50mA MAX；
4、Consume when all channels loading batteries：500mA MAX；
5、Chargingsufficiency of battery：≥80%；
4. Environment condition
1、Using environment: temperature: 0-35℃ humidity: ≤95％
2、Storage environment: temperature: -25～+60℃ humidity: ≤85％
3、Self environment when working: Surface temperature of charger when charging: ≤60℃，Surface temperature of battery when charging:≤60℃。
5. Safety spec
ord with safety standard: CE(as the adaptor passed CE)
6. Property
- High temperature test: testing temperature is 65℃±2℃. Product is without packing, lasting time is 5 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.
- Low temperature test: testing temperature is－20℃±3℃. Product is without packing, lasting time is 8 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.
