DOPAG品牌eldomix 600齿轮驱动计量混合系统

     eldomix 600系列产品结构紧凑，非溶剂型，齿轮泵驱动的计量混合系统。产品适用于混合比从100:100 到100:10 的低黏度到中等粘度多组分材料，如环氧树脂，聚胺脂和硅胶等。设备通过压力输料罐或原桶输料泵输料。

典型应用

• 涂层
• 封装
• 粘合
• 密封

Equipment

Standard

. Chassis with castors
. Inpidually positioned material supply modules with pressure vessels
. Gear pump with over pressure protection
. Three phase asynchronous motor
. Static mixing system - Twin snuffer valve -Disposable static mixer
. Metering computer

Optional

. Static-dynamic mixing system
-with mixer element monitoring
. Dynamic mixing system
. Control box and pressure
vessel chassis mounted
on castors
. Pressure vessel with
- level control
-agitator
- automatical refill
-connection for vacuum pump
. Material supply by drum pumps
. Touch screen terminal
. Controlling or regulation of mixing
ratio and output rate through
- Volume counter
-Mass flow meter
. Drive through servo motor
. Heating
. Bypass

Function

Material supply modules                                       A metering computer is used to control and monitor
with pressure vessels are                                    the system.
used to supply the material
into the three phase asyn-                                  The ELDO-MIX 603 is fitted with a static mixing
chronous motor driven                                         system that includes a twin snuffer valve combined
gear pumps where they                                       with a disposable static mixer.
are proportioned at the
pre-selected ratio.                                               Should mixed material be allowed to cure in the
                                                                            mixer, it can be replaced simply and inexpensively,
Each gear pump is                                               thus avoiding a time consuming, expensive and
protected against over                                         environment damaging flushing cycle.
pressure as standard.

Technical Data

Flow rate 2 ml to 10 l/min, depending onmixing ratio and viscosity
Mixing ratio 100:100 to 100:2, by volume
Maximum working pressure 100 bar
Mixing system Static mixing system- Twin snuffer valve
- Disposal static mixer
Material supply Modules with
pressure vessel, 12, 24 or 45 l
Viscosity range 50 to 80,000 mPa s, with pressure vesselup to 300,000 mPa s, with drum pumps
Material characteristics Filled, slightly abrasive
Power supply 3 x 400 V / 50 Hz / 16 A
Maximum air inlet pressure 6 bar
Dimensions L x W x H Complete, approx. 1.810 x 1.000 x 1.694 mmControl, approx. 960 x 1.000 x 1.146 mmModules, approx. 750 x 1.000 x 1.694 mm
Weight approx. 600 kg

详细技术参数请咨询我们公司技术部门。

金邦工业021-64086916

公司网站：