该机用于箔式高压电力电容的卷绕，自动张力，卷绕时铝箔折边，高速卷绕，卷绕后自动压扁，然后进行高压耐压测试，机器将测试好的电容芯子自动堆放整齐。
技术参数
1. 能卷绕230mm-508mm宽的材料
2. 元件直径：内径为52-135mm，外径最大为155mm
3. 6个介质心轴，3爪膨胀式紧固结构
4. 2个箔心轴，3爪膨胀式紧固结构
5. 所有材料的心轴尽可能低的装在易于装运的地方
6. 材料厚度：膜7.4-17微米，箔4.5-8微米
7. 卷轴的安排允许用顺时针或逆时针卷绕材料
8. 在所有心轴上进行材料断裂自动跟踪报警
9. 电介质/箔速度电气匹配
10. 高速高效箔末端折边
11. 翻卷式滚轴，铝箔边缘折边
12. 封闭的环形，伺服电动机张力控制系统
13. 可按元件卷绕圈数或铝箔的有效长度控制卷绕
WHC500 High Voltage Winding Machine
Description
This machine is used for winding high voltage power capacitor with foil, it has automatic tensility and the aluminum foil flanged when winding with high speed; the capacitor is flattened automatically after winding, then it goes high voltage and pressure testing. The machine will arrange the tested capacitor cores in order.
Technical parameter
- Winding width range of the material: 230mm-508mm
- Element diameter: I.D. 52mm-135mm, Max. O.D. 155mm
- 6 dielectric mandrels, inflatable fastening structure with three claws
- 2 foil mandrels, inflatable fastening structure with three claws
- Mandrels of all kinds of material loaded at easy loading place as low as possible.
- Thickness of material: film7.4-17μm, foil 4.5-8μm
- It is allowed to wind material in clockwise or anticlockwise
- All the mandrels are equipped with material break alarm (works automatically)
- Speed of dielectric or foil is controlled by electricity
- Flange the bottom of the foil with high speed and efficiency
- Roller works with winding and roll function, the edge of aluminum is flanged automatically
- Close loop room with tensility system controlled by servo motor
Winding length can be adjusted by winding cycles of elements or the length of aluminum
