Overview
The MB-ECP01AT Ethernet over Coax EoC Transceiver is a compact media converter that allows 10/100 Base-T Ethernet and
power to be transmitted using a single 75-ohm coax cable . it allows any CCTV IP camera(24 Watts) to be connected over extended distance. The MB-ECP01AT supports IP cameras up to 1000 ft (300m) at 90 Mbps and up to 6560ft (2km) at 35Mbps in a point-to-point configuration .These devices are often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras and can supply to cameras with 24Watts(Max) power.
The product works in pairs and the power consumption is low enough. The maximum distance depends on the grade of coax cable and the power consumption of the camera .These transceivers are extremely simple to use, with no IP or MAC addressing required.
Applications
Campus, highways, airports, hotels, casinos ,commercial complexes, remote parking lots, entry gates, self-storage, hospitals, car dealerships ,prisons, network connections
Features & Benefits
※ Connects IP camera to 10/100Base-T via single coax cable
※ 10/100 Base-T Full Duplex Ethernet can be up to 6560ft(2km).
※ Up to 24Watts for cameras.
※ Easy configuration, with no IP or MAC addressing required .
※ Built-in Surge Protection.
※ Preserve investment in coax infrastructure
※ Network connections in harsh electrical areas
Specifications
Environment | CCTV IP | ||
Devices | CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP | ||
| IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. | ||
Maximum Distance
| Distance | Total transmission rate (max) | Power ( Output For |
1000ft (300m) | 90Mbps | 24 Watts(Max) | |
1640ft (500m) | 86Mbps | 13.9Watts(Max) | |
2624ft (800m) | 83Mbps | 8.6Watts(Max) | |
3280ft (1km) | 82Mbps | NA | |
6560ft (2km) | 35Mbps | NA | |
RJ45 Ethernet Interface | Connector | RJ45 | |
Wire type | 4-pair Cat5 or better | ||
Distance | up to 328ft (100m) | ||
Speed | 10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over | ||
Latency |
| ||
coax cable Interface | Connector | BNC, RG-59/U or similar | |
Impedance | 75Ω | ||
Power | Power | Powered via coax cable | |
Power Consumption | 1.2 Watts(Max) No external supply required | ||
12VDC | 24 Watts (Max) | ||
Leds indicator | Green Led | coax cable connect | |
Yellow Led | Network Signal communication | ||
Surge Protection | 2KV(different-mode), 4KV(common-mode) | ||
Temperature | Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing | ||
Enclosure | Aluminum alloy | ||
Dimensions(packaging) |
| ||
Weight(packaging) |
| ||
Typical Application
'
