Yiworld™系列环保烟雾过滤净化系统专门针对焊锡浸锡沾锡、波峰焊回流炉、激光加工、实验室等各种烟雾、粉尘、微粒、气味的过滤净化。本机特点有吸力大、耗电低、过滤效率高、操作简单、移动灵活等特点，产品已被国内外众多企业所采用。

产品特点：
●箱式设计，体积小巧，移动灵活，安装简便，占用空间小
●进口无刷马达，质量稳，寿命长，吸力更强劲，风量大小可调
●三重过滤设计，过滤效率更高，单独更换过滤芯，使用成本更低
●多工位设计，吸烟臂360°自由定型
●方便配合各种生产线、流水线作业
●超静音设计，无噪音污染
适用场合：
Ο烙铁焊锡、锡炉沾锡
Ο波峰焊、回流炉
◎激光焊接、雕刻、打标、切割
◎打磨、抛光、印刷
◎化学实验室

※欢迎来电咨询：186-0769-5075（谢生）※

This test distinctly shows the importance of using a fume extraction system, even when soldering only once in a while or for just a few hours a day. The captured particles are primarily condensed residues from flux. Without a filter system these particles ill be partly inhaled the operator with the remainder spread over the work object and workplace. In contrast, a proper filter system will eliminate not only the particles, but will also catch and eliminate dangerous gases created in the soldering process.Industrial lasers can also generate harmful fumes when used on

different types of materials in the manufacturing process. These fumes

are known collectively as Laser Generated Air Contaminants (LGACs).

LGACs fall into two categories: particles and gases

规格型号
F-601
F-602
工位数
1
2
静压力
1000Pa
1000Pa
空载流量
240m3/h
300m3/h
负载流量
200 m3/h
2*120 m3/h
过滤效率
0.3μm 99.97%
0.3μm 99.97%
功率
85W
100W
噪音
＜50dB
吸烟臂
1.2m
输入电压
220V AC
外形尺寸（长宽高）
400*240*350mm
400*230*350mm
重量
约7.8kg
约8.5kg
烟尘过滤（净化）原理:
Tel:18607695075谢生
用风机将烟雾抽入机箱，通过内置的滤芯进行过滤，主要能够起到过滤粉尘

、异味、有毒气体和杀灭部分细菌的作用。滤网又分：集尘滤芯、玻纤滤芯、

HEPA滤芯、活性炭滤芯等。其中最关键就是活性炭滤芯，它能起到分解有毒气体

和杀菌作用，特别是抑制二次污染。产品的特点是风机功能以及滤芯的质量决定

净化效果，机器的放置以及室内布局影响净化是否完全，室内净化效果是否均衡

。滤芯需定期更换。

烟雾组成成分及危害:
通常在焊接烟雾中有95％是焊料及助焊剂在高温下挥发出的微粒，这些微粒

飘浮在空气中在一定的光线照射下人眼可以观察到，即我们能够看到的烟雾。而

另外有5％是以气体方式散发在空气中，我们的肉眼是看不到的，而这些气体中

含有大量的一氧化碳、二氧化碳、甲醇、乙醇、甲烷、甲醛等有害性成分。
操作者长时间在以上环境下工作，吸入过量有毒物质，将会引起头痛、恶心、哮

喘、慢性支气管炎等症状，严重影响身体健康，同时也影响正常生产。
Hazardous smoke and fumes, harmful to your health if inhaled, are

present in many workplace environments. Operations using lead-free

solder, lasers, solvents, and glues are especially at risk.

Overexposure can lead to serious – and possibly long term – medical

problems.Health difficulties such as nosebleed, eye irritation, and

sore throat are occurring with increasing frequency in the workplace,

as are incidences of dermatitis, occupational asthma, and, in some

cases, permanent lung damage.

购买烟雾净化器与安装大型管道优劣比较：

亿沃电子--专注环保，关注健康.

TEL：+86（0）186-0769-5075

Email：world208@163.comQQ：19223 61016 FAX：0769-85024569

更多亿沃Yiworld产品：






数字告诉你

买烟雾净化机的理由
15支烟
意大利乔瓦尼医学院证实：在米兰生活一天,吸进的污染空气等于吸15支烟。世

界时尚之都尚且如此污染,其他城市可想而知。
2倍
美国环保局和加拿大卫生署证实：人类68％的疾病是由空气污染引起的。故空气

污染导致的医疗开支比其他疾病加起来还多2倍。
5倍
世界卫生组织(WHO)证实：室内空气污染造成的疾病,超过室外5倍。 (人有

70％-90％的时间是在室内)
11倍
人平均每天呼吸13立方米空气,每立方米1.29公斤重。等于每天“喝”17公斤空

气,比喝水多11倍——宁肯不喝纯净水,也要呼吸纯净气!
20倍
装有净化机的室内或车内,至少比城市空气清洁20倍,在某些污染严重处,甚至超

过100倍——宁肯不买好房子,也要买净化机!
30年
生命科学家判断：如果没有空气污染,全世界人均寿命可以延长30年。所以,宁肯

节食省衣,也要用上净化机!

买亿沃Yiworld烟雾净化机的理由
3用
全球唯一“一机3用”的空气净化机。 将除尘、灭菌、除醛、功能集于一身。人

类第一次有机会轻松地消除烟尘污染。
0.3微米
HEPA除尘器能过滤0.3微米的颗粒物,比人体最小细胞还小数十倍,避免空气中的

微粒尤其是铅、镉等重金属穿透细胞进入血液。
99.9％
6厘米厚活性炭（全球同类烟雾净化器中活性炭含量最多）能瞬间吸附有害气体

，吸附率率高达99.9％,防止感冒、咳嗽、呼吸道感染、肺炎等疾病及“空调病

”。

83％活性碳能过滤装修、家具释放的甲醛。开机2个小时就能过滤掉房间里83％

的甲醛,防止白血病、肝癌等致命疾病,并能消除异味。

OCCUPATIONAL ASTHMA
“Occupational Asthma is a disease characterized by variable air flow

limitation and/or airway hyper-responsiveness due to causes and

conditions attributable to a particular occupational environment and

not to stimuli encountered outside the workplace.” (Bernstein et al

1993)
Fumes and gases in industrial areas are often dangerous to the people

working in those areas. Some of these substances are readily visible

or have a distinct odor; others are invisible and odorless. Many are

toxic and can lead to allergic reactions, sometimes progressing to occupational asthma.

Occupational asthma is a major issue in electronics manufacturing

because when a worker develops occupational asthma, they must be

removed from the working area, sometimes permanently. In some

countries, cases of occupational asthma due to flux fumes and/or

isocyanates have already lead to legal claims against employers.

Occupational asthma is often indicated by symptoms common to hay

fever – an itchy, blocked, or runny nose, often accompanied by

sneezing and glazed, itchy, or watering eyes.
LEAD-FREE SOLDER

The transition to lead-free soldering has reduced strain on the

environment, but for the operator, the hand soldering process has

become more dangerous. The lead in the solder is gone, but to get the

solder wire to flow properly, substantially more flux must be used.

The temperature needed to create a good solder joint using lead-free

solder is also higher, causing a stronger reaction within the flux and

creating more solder smoke with a greater number of particles. Lead-

free soldering produces up to 250 % more particles between 0.5 and 1.0

microns in diameter, the size that is the most dangerous to inhale. In

addition to particles, solder smoke can contain isocyanates,

aldehydes, and other unhealthy substances.
Lead-free soldering causes up to 250 % more particles in the breathing

zone … roughly 20 million particles between 0.3 and 1.0 microns in

diameter per cubic foot, or about 700 million particles per cubic

meter.

How particles of different size get caught in different parts of the

human respiratory system:
Health prob焊锡吸烟仪上海箱式焊接烟雾过滤器
管道锡炉空气净化机
单机激光废气处理装置
工业 烙铁 烟尘吸附机器
工厂 焊台抽烟设备
进口 波峰焊烟雾处理
宁波 国产 回流炉烟雾净化烟雾过滤机烟雾循环净化设备循环烟雾过滤器机器

lems that are related to particles and gases in the electronics

industry:
Nosebleeds
- Early indication, very common in the electronics industry.
Respiratory problems
- Worsening of existing asthmatic conditions
- Occupational Asthma
- Irritation of the eyes and upper respiratory tract
Early symptoms are:
* Watery eyes
* Runny or blocked nose
* Sore throat
* Coughing
* Wheezing or breathing difficulties
AIRBORNE PARTICLE DEMONSTRATION
90 MINUTES OF LEAD-FREE SOLDERING

The following shows exactly what an operator could possibly breathe in

during 90 minutes of lead-free soldering.

Standard lead-free 3% type ROL1 no-clean flux solder wire was melted

continuously with a standard iron. The suction nozzle of a high

efficiency fume extraction system was positioned near the tip of the

iron. Just 90 minutes later, a nozzle-mounted net had captured a

substantial amount of particulates.BEFORE AFTER 90 MINUTES OF
LEAD-FREE SOLDERING
焊锡吸烟仪上海箱式焊接烟雾过滤器
广州管道锡炉空气净化机
中山单机激光废气处理装置
顺德 工业 烙铁 烟尘吸附机器
青岛 工厂 焊台抽烟设备
大连 进口 波峰焊烟雾处理
宁波 国产 回流炉烟雾净化烟雾过滤机烟雾循环净化设备循环烟雾过滤器机器
Back to top

PARTICLES

Respirable particles – Many particulate LGACs are very small

(generally less than 1 micron in diameter), so they can be easily

inhaled.

Toxic particles – Some particulate LGACs may cause allergic,

carcinogenic or toxic effects, such as the chrome and nickel

particles produced when working with lasers on stainless steel.
Back to top
GASES

Volatile Organic Compounds (VOCs) are often produced when working with

lasers on plastics.

Many VOCs already have Workplace Exposure Limits in place according to

COSHH (control of substances hazardous to health).
Back to top
Workers exposed to organic solvents for an extended time period incur

increased risk of the following health issues:

Chronic damage to the nervous system, which can result in

concentration and memory impairment, personality changes, and

permanent tiredness.

Reduced sensitivity to touch

Restless arm/leg syndrome

Skin dryness and irritation; non-allergic eczema

SOLVENT OVERVIEW, TYPES, AND FAQs
Overview
Few workers understand the risks of exposure to solvents, yet many are

exposed to them on a daily basis. Everyone working in an industrial

environment comes into contact with chemicals that contain solvents.

How dangerous the chemicals containing the solvents are depends on the

properties of the substances and the precautions taken when handling

them.

Organic solvents are absorbed primarily through the mucous membranes

(total area: 80-200 m²), but some can also be absorbed through the

skin (total area approximately 2 m²) or digestive system (total area

approximately 10 m²).

There is a noticeable trend of people becoming more sensitive to

allergic materials, such as airborne particles and solvents, in

industrialized societies. This indicates a need for improved

extraction equipment and precautions.
Types
Isocyanates Isocyanates is the name of a large family of substances

such as TDI (toluene-2,4-diisocyanate), MDI (diphenyl-methane

diisocyanate), and HDI (hexa-methylene diisocyanate) used extensively

in industrial workplaces. There are a large number of different

isocyanates with different characteristics, but common to all of them

is that they cause health problems, especially when inhaled. One of

the largest areas of use for isocyanates is in the manufacture of

polyurethane plastics (PUR). PUR appears as a soft compact foam and is

found in coatings and other chemical products. Approximately 5 % of

all plastics used are currently PUR and its usage is increasing.

However, during the polymerizing and heating of PUR, a number of

isocyanate combinations are formed. When heating phenyl formaldehyde

resin, methyl isocyanates are formed.
Isocyanates can easily be absorbed through the skin and through the

mucous membranes. In contact with water they form amines that will

stay in the blood for a long time. Isocyanates are also found in

polyurethane materials (coatings), glues, and varnishes.

Isocyanates cause health hazards – especially when inhaled in the

form of gas, steam, dust, or aerosol droplets. Inhalation can cause

irritation in eyes, mucous membranes, and respiratory system with

symptoms resembling asthma or bronchitis and decreased lung function.

The risk of hypersensitivity is high.

Isocyanates can also cause skin irritation. Repeated contact can cause

eczema, and in some cases, skin allergy. Isocyanates have a very low

limit value … so low that you may be exposed to dangerous

concentrations without noticing, as isocyanates are invisible and

odorless at low levels. An allergic person can develop problems even

when exposed to concentrations below the hygienic limit value.

Recently, new health hazards have been discovered with certain PUR

coatings and some PUR glues used in the manufacture and repair of

printed circuit boards. The same risks occur when working with coated

optical cables that contain small amounts of PUR and coated wire. When

these materials are heated, isocyanates are formed in such high

concentrates that it can cause asthma. It is believed that the thermal

segregation starts at 150-200°C. There are also strong reasons to

suspect that isocyanates can be formed when heating resin products

like fluxing materials.

Alcohols Inhalation or skin contact with alcohols such as methanol,

ethanol, or isopropanol can cause dizziness, headache, disturbed

vision, or fainting. Absorption over a longer period can permanently

damage the eyesight of the victim.
焊锡吸烟仪上海箱式焊接烟雾过滤器
广州管道锡炉空气净化机
中山单机激光废气处理装置
顺德 工业 烙铁 烟尘吸附机器
青岛 工厂 焊台抽烟设备
大连 进口 波峰焊烟雾处理
宁波 国产 回流炉烟雾净化烟雾过滤机烟雾循环净化设备循环烟雾过滤器机器
Aldehydes Aldehyde solvents such as formaldehyde and acetaldehyde are

transformed when heat is applied to them, resulting in fumes that have

an irritating effect on the eyes and respiratory organs. Inhalation

can induce headache, dizziness, and fainting in severe cases.

Esters (acetates) Esters such as ethyl acetate and dioctyl phthalate

are often used as solvents and dissolvents in the manufacture of

paints, plastics, and synthetic fibers. Like most solvents, they cause

irritation of the respiratory passages, but long term exposure causes

kidney and liver damage.

There are many other solvents in common use, including ketones,

mercaptans, organic acids, and ethers, all of which have an effect on

the human body, primarily on the respiratory system. Skin contact

(splashes) resulting in eczema is a secondary, but fairly common

occurrence.

FAQs

Why are solvents dangerous?
Can the body break down solvents?
Are all solvents equally dangerous?
What parts of the body do solvents harm?
Is the damage done by solvents permanent?

Q:Why are solvents dangerous?

A: Solvents dissolve fat. The easier they dissolve fat, the easier

they are absorbed by the body and the greater their capacity for doing

damage. The ability to dissolve fat is partly the reason why solvents

are used, and is one of the main reasons why they are so dangerous if

they get into your body.
The cells of the brain contain a high degree of fat. Since the brain

works like a sponge in absorbing solvents, this puts the nervous

system at great risk.

Q:Can the body break down solvents?

A:Yes, the liver can break down many of the solvents. But

unfortunately, the chemicals formed when these substances are broken

down can be even more dangerous than the original solvents.
It can take a long time for your body to break down solvents – so

long, in fact, that the body cannot get rid of everything during the

night or even over the weekend. This is very serious because it means

that solvents can accumulate in your body, sometimes causing

irreversible damage.

Q:Are all solvents equally dangerous?

A: No, some are safer than others. Also, the body absorbs some more

slowly than others. If you have a choice of solvents, use one that

causes as little harm as possible and is absorbed very slowly.

Q:What parts of the body do solvents harm?

A:That depends on the solvent in question. The brain, bone marrow,

liver, and kidneys are susceptible to damage, but the most common

effect is damage to the nervous system. Just as with alcohol (which is

a solvent) as the body absorbs more and more of a solvent, reactions

become slower and judgment is impaired. In many jobs, those events can

open the victim to other, even more extreme dangers.

Q: Is the damage done by solvents permanent?

A: Unfortunately, in many cases the damage is irreversible. It has

been proven that occupational symptoms appear slowly over a long

period. By the time a condition is diagnosed, lasting damage may have

been caused to the nervous system, respiratory system, eyes, brain,

liver, and kidneys.

GLUES

The main health risks of long-term exposure to glues are:

- Skin irritation
- Skin drying
- Allergic contact eczema
- Asthmatic problems from inhalation of glue dusts and solvents

The level of health risk varies depending on the type of glue being

used, with non-hardening glues (“hot glues” that gain strength by

cooling) being least dangerous. Glues that strengthen by drying are

somewhat more harmful, with water?based glues being less dangerous

than solvent?based types. Glues that pose the highest risk of health

concerns are “hardening” glues that cure independent of surrounding

conditions.

HARDENING GLUES – HEALTH CONCERNS
Polyurethane glues – Polyurethane glues contain isocyanates that are

released during application. Isocyanates can cause:

Asthma
Hyper-sensitivity to isocyanates
Breathing problems when exposed to other fumes (perfumes, motor

vehicle exhaust, tobacco smoke, etc.)
Irritation of skin and eyes
Reduced
can cause poisoning through contact, ingestion, or f