产品特性: 主要用途: | |||||||||||||||||||||||||
滤帽主要规格及技术参数
|
滤头是一种较为新颖的滤池反冲洗配水配气装置之一，产品有长柄短柄梅花型、塔型、蘑菇型、圆柱型等。原料为ABS工程塑料，强度大，耐久性好，缝隙不变形，分布均匀，布置合理，改善了滤头的水力特性，减小水头损失，冲洗无死角区，不积泥，气水反冲洗效果好,节水，节能。产品有不同型号供使用厂商选择。 |
滤头（帽）
滤头是滤池底部配水系统汽水反冲冼装置，它能有效地冲洗出滤池中的污泥杂物，保证滤池水质水量正常运行；滤头的种类有（长、短柄）磨菇型、梅花型、塔型和圆柱型，均采用ABS工程塑料制成，结构合理，连接牢固，承压强度高，缝隙不变型，能使滤板间无死水角区，不积泥，效果好，（每小时排水量）0.25吨、0.5吨、1吨。长柄滤头常用于滤池汽水反冲洗配水系统；短柄滤头应用于单水反冲洗和重力式，压力式滤罐及离子交换滤床
各称 | 材质 | 滤缝条数（条） | 规格mm | 滤缝面积 | |||||||||||||||||||||||||||||||||||
滤水帽 | ABS | 40 | 25×0.25±0.02 | 2.5 | |||||||||||||||||||||||||||||||||||
滤水管 | ABS | 1 | ￠20 | 3.4 | |||||||||||||||||||||||||||||||||||
叠盖螺帽 | ABS | 1 | 0.2×24 | 0.48 | |||||||||||||||||||||||||||||||||||
密封圈 | 橡胶 | 1 | ￠30 | 1 | |||||||||||||||||||||||||||||||||||
预埋螺管 | ABS | 1 | ￠30 | 1 | |||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||
Filter backwash filter cap is soft recoil at the bottom of the water distribution system Sin device, it can effectively flush out the debris in the sludge filter, ensure the normal operation of filter quality and quantity; The types of filter head (long, short-throw) mushroom type, plum-type, tower type and cylindrical, ABS engineering plastics are used, reasonable structure, reliable connection, bearing, high strength, gap the same type, make plates were no stagnant water horn, no accumulation of mud, effect, and (h displacement) 0.25 tons, 0.5 tons, 1 ton. Commonly used in the filter head and shank soft filter backwash water distribution system; glandulifera filter backwash water used in the single head and gravity, pressure type filter tank and filter bed ion exchange water treatment equipment, filtration devices
