'

主要特点

宽输出电压、电流范围：0-16 Vdc to 0-4000 Vdc 和 0-7.2 Adc to 0-4500 Adc

以标准的宽输入电压、频率范围:

从 380 Vac 到 480 Vac 频率： 50 Hz 和 60 Hz

高精度的可编程和监测

高效率：高达88%满载

I/O标准通讯接口：37针电路标准的光隔离的用户I / O界面，无需额外的隔离电路

高效率的运作：高达92％的效率在满载情况下

RS232接口标配（标准SCPI命令）：
GPIB，USB，以太网，RS485接口可选

可选以太网LAN接口（LXI-certified Ethernet communications）:内嵌web-server

过压过流保护关闭标准(OCT&OVT STD): 过压保护和过流保护机械接触器高速断开主输入

可回馈电网选件（MT series):

电能可回馈（Power Cycle AC Grid），自动谐波消除平衡系统，产生(6n±1)-12/18/24/48个脉冲高级的回馈电网技术

 

Specifications

 

Input

Nominal Voltage 3 phase, 3 wire + ground	208 VAC (operating range 187 - 229 VAC) 240 VAC (operating range 216 - 264 VAC) 380 VAC (operating range 342 - 418 VAC) 415 VAC (operating range 373 - 456 VAC) 440 VAC (operating range 396 - 484 VAC) 480 VAC (operating range 432 - 528 VAC)
Frequency	50 Hz - 60 Hz (operating range 45 Hz - 66 Hz)
Power Factor	Greater than 92% at maximum power for 3 phase models

Environmental

Operating Temperature	0°C to 50°C
Storage Temperature	-25°C to +85°C
Ambient Temperature	0 to 50°C
Temperature Coefficient	0.04%/°C of maximum output voltage, 0.06%/°C of maximum output current.
Air Cooling (Standard)	Side air inlet, rear exhaust
Water Cooling (Optional)	25°C maximum inlet temperature 3.0 GPM minimum flow rate for 30 kW units 4.5 GPM minimum flow rate for 45-75 kW units 80 PSI maximum pressure 1/4” NPT female pipe size

Physical

Power	Input Phases	Size (H" x W" x D")	Weight
30 kW 45 kW 60 kW 75 kW	3Φ 3Φ 3Φ 3Φ	38½" x 22" x 29" (97.79 x 55.58 x 73.66 cm) 38½" x 22" x 29" (97.79 x 55.58 x 73.66 cm) 38½" x 22" x 29" (97.79 x 55.58 x 73.66 cm) 49" x 22" x 29" (124.46 x 55.58 x 73.66 cm)	280 lbs (127.01 kg) 395 lbs (179.17 kg) 510 lbs (231.33 kg) 645 lbs (292.57 kg)

Output

Ripple	See Model Charts
Line Regulation	Voltage Mode: ± 0.004% of full scale Current Mode: ± 0.02% of full scale
Load Regulation	Voltage Mode: ± 0.01% of full scale Current Mode: ± 0.04% of full scale
Load Transient Response	2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change
Efficiency	≥ 86%; See Model Charts
Stability	± 0.10% for 8 hrs. after 30 min. warmup
Isolation	User inputs and outputs: referenced to earth ground. Maximum input voltage to ground: ±2500 Vac Maximum output voltage to ground: ±1000 Vdc for models less than or equal to 1000 Vdc, ±(2000 Vdc + Vo/2) for models greater than 1000 Vdc or with High Isolation Output Option (+ISO) where Vo is the maximum output voltage of the power supply.
Maximum Slew Rate	Standard Models: 100 ms for an output voltage change from 0 to 63%, 100 ms for an output current change from 0 to 63%. With High Slew Rate Option (+HS): 4 ms for an output voltage change from 0 to 63%, 8 ms for an output current change from 0 to 63%.
Bandwidth	Standard Models: 3 Hz with remote analog voltage programming, 2 Hz with remote analog current programming. With High Slew Rate Option (+HS): 60 Hz with remote analog voltage programming, 45 Hz with remote analog current programming.
Analog Output Impedances	Voltage output monitoring: 100 ohm Current output monitoring: 100 ohm +10V Ref: 1 ohm

Programming Levels and Accuracy of Full Scale

	Voltage Set Point	Current Set Point	OVT Set Point	OCT Set Point
Remote Analog Programming Accuracy	± 0.075%	± 0.075%	± 0.075%	± 0.075%
Digital Programming Accuracy	± 0.075%	± 0.075%	± 0.075%	± 0.075%
Remote Analog Programming Levels	0 - 10.0 Vdc	0 - 10.0 Vdc	0 - 10.0 Vdc	0 - 10.0 Vdc

Monitoring Levels and Accuracy of Full Scale

	Output Voltage	Output Current
Remote Analog Monitoring Accuracy	± 0.2%	± 0.2%
Digital Monitoring Accuracy	± 0.2%	± 0.2%
Remote Analog Monitoring Levels	0 - 10.0 V	0 - 10.0 V

Control Limits

Remote Sense Limits	3% maximum voltage drop from output terminals to load.  Remote sense is not available for models with output voltages greater than 1000 Vdc or with +ISO option.
Period Programming Limits	Minimum period: 10 msec Maximum Period: 9997 sec or 2.77 hours
Digital control inputs and outputs limits	Input voltage: 0 to 5 Vdc, 10K input impedance; Output voltage: 0 to 5 Vdc, 5 mA drive capacity 5 V supply: 25 mA.

       上海逸威电子设备有限公司
联  系  人：陈芸雁 女士 （技术部 总经理）
电      话：86 021 61911916
移动  电话：13671590819
传      真：86 021 61911916
地      址：中国 上海市徐汇区 上海市徐汇区漕宝路103号2号楼2213-2214室
邮      编：200233
公司  主页：
    http://www.eeeiwave.com
    http://shop1372784255697.1688.com

上海逸威电子设备有限公司是一家从事高科技电力电子领域仪器仪表企业，是经国家相关部门批准注册的企业。主营电源系统、传感器、手持便携测试仪器、电阻电 容电感、自动化系统、节能滤波系统、节能回馈电子负载、电源传感器、通用台式测试仪器、电阻电容电感测试自动化系统、变压器、电抗器、电机介质损耗测试 仪，匝数比测试仪，高压源，标准电容，静电校准系统，计量校准标准源以及测试夹具配件等。公司位于中国上海市徐汇区漕宝路103号2号楼2213-2214室。上海逸威电子设备有限公司本着“客户第一，诚信至上”的原则，与多家企业建立了长期的合作关系。热诚欢迎各界朋友前来参观、考察、洽谈业务。

'