Features

• SATA III interface
• Extremely low power consumption
• iSMART disk health monitoring
• Intelligent error recovery system
• Excellent data transfer speed
• Hardware write protect
• Enhanced power cycling management

Overview

The Innodisk CFast 3SE operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 470MB/sec. and of sequential write up to 250MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3SE is featured as small form factor, and suitable for most industrial application.

CFast 3SE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3SE support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3SE prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

Specifications

Availability

Model Name                                       CFast 3SE

Interface                                          SATA III 6.0 Gb/s

Type                                              Standard

Flash Type                                         SLC

Connector                                          7+17 pin

Capacity                                           1GB~64GB

Max. Channels                                      4

Sequential R/W (MB/sec, max.)                       470 / 250

Max. Power Consumption                            1W

Thermal Sensor                                     Optional

H/W Write Protect                                   Y

S.M.A.R.T.                                            Y

Dimension (WxLxH/mm)                               42.8 x 36.4 x 3.6mm

Vibration                                             20G@7~2000Hz

Shock                                                1500G@0.5ms

MTBF                                                >3 million hours

Storage Temperature                                  -55°C ~ +95°C

Operation Temperature                                Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C