公司简介：济宁天通水处理设备有限公司——通过品牌的建立，经过十余年经营与发展，不仅在国内已成为行业企业，产销量居全国前列；在另一个更广阔的天地里，更是走出了自己特色的产业路径。其核心产品以：废水处理站、废水处理工艺、废水处理设备、工业废水处理设备、水处理设备、生活废水处理设备、环境废水处理设备等设备为主。“济宁天通”品牌系列产品以远销欧盟、东盟、中东地区，为济宁天通更快、更新、更高的发展，奠定了坚实的基础。

一、化工废水处理设备概述

　　化工废水是指化工厂生产产品过程中所生产的废水，如生产乙烯、聚乙烯、橡胶、聚酯、甲醇、乙二醇、油品罐区、空分空压站等装置的含油废水，经过生化处理后，一般可达到国家二级排放标准，现由于水资源的短缺，需将达到排放标准的水再经过进一步深度处理后，达到工业补水的要求并回用。

　　化工厂作为用水大户，年新鲜水用量一般为几百万立方米，水的重复利用率低，同时外排污水几百万立方米，不仅浪费大量水资源，也造成环境污染，并且水资源的短缺已对这些工业用水大户的生产造成威胁。为保持企业的可持续发展及减少水资源的浪费，降低生产成本，提高企业经济效益和社会效益。需对化工废水进行深度处理(三级处理)，作为循环水的补水或动力脱盐水的补水，实现污水回用。

　　由于水中杂质主要为悬浮颗粒和细毛纤维，利用机械过滤原理，采用微孔过滤技术将杂质去除。由PLC或时间继电器控制过滤器设备工作状况，实现自动反冲洗、自动运行，提升水泵提供过滤器所需水头，出水直接引入生产系统。

　　二、化工废水处理设备主要特征分析

　　1、化工废水成分复杂，反应原料常为溶剂类物质或环状结构的化合物，增加了废水的处理难度;

　　2、该废水中含有大量污染物物质，主要是由于原料反应不完全和原料或生产中使用大量溶剂造成的。

　　3、有毒有害物质多，精细化工废水中有许多有机污染物对微生物是有毒有害的，如卤素化合物、硝基化合物、具有杀菌作用的分散剂或表面活性剂等;

　　4、生物难降解物质多，B比C低，可生化性差;

　　三、化工废水处理设备性质

　　化工产品生产过程中产生的废水表现为：排放量大、毒性大、有机物浓度高、含盐量高、色度高、难降解化合物含量高、治理难度大,但同时废水中也含有许多可利用的资源，而膜技术作为高新技术在化工领域的生产加工、节能降耗和清洁生产等方面发挥着重要。

　　四、总述

　　随着经济的发展，工业用水量大幅度上升、污染加剧，导致化工污水严重。各大化工企业运用化工废水处理设备合理使用循环水，加大节约用水和治理化工污染的力度。

联系人：范经理​

Company introduction: Jining water treatment equipment limited company -- through the establishment of the brand, after ten years of operation and development, not only in the domestic industry has become a leading enterprise in production and sales in the country; the other in a wider world, is the industry path out of their own characteristics. Its core products are: wastewater treatment station, waste water treatment process, waste water treatment equipment, industrial wastewater treatment equipment, water treatment equipment, domestic wastewater treatment equipment, environmental wastewater treatment equipment and other equipment. "Jining Tiantong" brand products are exported to the European Union, ASEAN and the Middle East, and laid a solid foundation for Jining's faster, newer and higher development.
A summary of chemical wastewater treatment equipment
Chemical wastewater is a waste produced by the production of chemical products factory in the process of oily wastewater such as the production of ethylene, polyethylene, rubber, polyester, methanol, ethylene glycol, oil tank, air pressure station device, after biochemical treatment, which can reach two national emission standards, due to the shortage of water resources the need to reach the discharge standard of water after further treatment, meet the industrial requirements and water reuse.
Chemical plant as the major water users, annual amount of fresh water is generally millions of cubic meters, the water reuse rate is low, while the sewage discharged from millions of cubic meters, not only waste a lot of water resources, but also cause environmental pollution and the shortage of water resources has the large industrial water production threat. In order to maintain the sustainable development of the enterprise and reduce the waste of water resources, reduce the cost of production, improve the economic and social benefits of the enterprise. It is necessary to treat the chemical wastewater in depth (three grade treatment), which can be used as the supplement of circulating water or the supplement of power desalted water to realize the reuse of sewage.
Because the impurities in the water are mainly suspended particles and fine wool fibers, the impurities are removed by microporous filtration technology by the principle of mechanical filtration. The PLC or time relay controls the working state of the filter equipment, realizes automatic backwashing and automatic operation, and improves the water head needed by the pump to provide the filter, and the effluent is directly introduced into the production system.
Two, analysis of the main characteristics of chemical wastewater treatment equipment
1. The composition of chemical wastewater is complex, and the reaction material is often solvent or ring structure compound, which increases the difficulty of wastewater treatment.
2. The waste water contains a large number of pollutants, mainly due to incomplete reaction of raw materials and the use of large amounts of solvents in raw materials or production.
3, there are many toxic and harmful substances. Many organic pollutants in fine chemical wastewater are toxic and harmful to microorganism, such as halogen compounds, nitro compounds, bactericidal dispersants or surfactants.
4. There are many biodegradable materials, B is lower than C, and the biodegradability is poor.
Three. Properties of chemical wastewater treatment equipment
Waste water have chemical products in the production process for a large quantity of discharge, high toxicity, high organic concentration, high salinity, high chroma, high content of refractory compounds, difficult to control, but also contains a lot of available resources and waste water, and membrane technology as production and processing, energy saving and clean the production of new and high technology in chemical industry plays an important.
Four, overview
With the development of the economy, the industrial water consumption has increased greatly and the pollution is aggravated, which leads to the serious chemical sewage. The large chemical enterprises use the chemical wastewater treatment equipment to rationally use circulating water and increase the power of saving water and treating chemical pollution.
Contact phone: 18953768880
Contact: Fan Manager
​